diff options
Diffstat (limited to 'share/man/man4/ng_ccatm.4')
-rw-r--r-- | share/man/man4/ng_ccatm.4 | 328 |
1 files changed, 0 insertions, 328 deletions
diff --git a/share/man/man4/ng_ccatm.4 b/share/man/man4/ng_ccatm.4 deleted file mode 100644 index 02a5a5f011b5..000000000000 --- a/share/man/man4/ng_ccatm.4 +++ /dev/null @@ -1,328 +0,0 @@ -.\" -.\" Copyright (c) 2001-2004 -.\" Fraunhofer Institute for Open Communication Systems (FhG Fokus). -.\" All rights reserved. -.\" Copyright (c) 2005 -.\" Hartmut Brandt. -.\" All rights reserved. -.\" -.\" Author: Harti Brandt <harti@FreeBSD.org> -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" -.\" THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" $FreeBSD$ -.\" -.Dd March 3, 2023 -.Dt NG_CCATM 4 -.Os -.Sh NAME -.Nm ng_ccatm -.Nd "ATM Call Control netgraph node type" -.Sh SYNOPSIS -.In netnatm/unimsg.h -.In netnatm/msg/unistruct.h -.In netnatm/sig/unidef.h -.In netnatm/api/unisap.h -.In netnatm/api/atmapi.h -.In netnatm/api/ccatm.h -.In netgraph.h -.In netgraph/ng_uni.h -.In netgraph/ng_ccatm.h -.Sh DEPRECATION NOTICE -.Nm -is deprecated and may not be available in -.Fx 14.0 -and later. -.Sh DESCRIPTION -The -.Nm -node implements the API specified by the ATM Forum for access to ATM services -(see ATM-Forum document -.Pa af-saa-0108 ) . -This document specifies the semantics -of the API, not the exact language binding. -For this reason, it is expected that -this implementation is neither compile-time nor binary compatible with -other implementations of this API. -It should, however, be fairly straightforward -to convert between different API implementations. -.Pp -This node is usually stacked on top of one or more UNI nodes (see -.Xr ng_uni 4 ) . -Each of these hooks appears as a -.Dq port -to the user of the node. -It also has one hook connected to the ILMI daemon for management purposes. -.Pp -The node is removed when it receives a -.Dv NGM_SHUTDOWN -messages or when all hooks are disconnected. -.Sh HOOKS -The node understands a number of hooks with predefined names and an -unlimited number of hooks for user connections. -The predefined names are: -.Bl -tag -width ".Va orphans" -.It Va uni Ns Ar NNN -These hooks stack the -.Nm -node on top of a UNI stack. -The node expects the interface on these hooks -to conform to the upper interface specified in -.Xr ng_uni 4 . -These hooks are forced into queuing mode, so that there are no circular -calls from call control to UNI and UNI back to call control. -The -.Ar NNN -in the hook name is the decimal port number and should not be zero. -The port number is a 32-bit unsigned integer. -.It Va manage -This hook should be connected to the ILMI daemon. -No data is ever sent on this hook and all received data is discarded. -The hook is used to send control messages along. -.It Va dump -On receipt of a -.Dv NGM_CCATM_DUMP -command a textual description of the current state of the node is sent -out of this hook. -This text is sent as one large message consisting of more -than one -.Vt mbuf . -.El -.Pp -All other hook names are taken to be user hooks and correspond to an -ATM endpoint as specified in the ATM Forum document. -The interface on these hooks is defined in -.In atmapi.h -and uses a structure -.Bd -literal -struct ccatm_op { - uint32_t op; /* request code */ - u_char data[]; /* optional data */ -}; -.Ed -.Pp -This structure is followed directly by the data for the operation. -The opcode is one of the following: -.Bd -literal -enum atmop { - ATMOP_RESP, - ATMOP_ABORT_CONNECTION, - ATMOP_ACCEPT_INCOMING_CALL, - ATMOP_ADD_PARTY, - ATMOP_ADD_PARTY_REJECT, - ATMOP_ADD_PARTY_SUCCESS, - ATMOP_ARRIVAL_OF_INCOMING_CALL, - ATMOP_CALL_RELEASE, - ATMOP_CONNECT_OUTGOING_CALL, - ATMOP_DROP_PARTY, - ATMOP_GET_LOCAL_PORT_INFO, - ATMOP_P2MP_CALL_ACTIVE, - ATMOP_P2P_CALL_ACTIVE, - ATMOP_PREPARE_INCOMING_CALL, - ATMOP_PREPARE_OUTGOING_CALL, - ATMOP_QUERY_CONNECTION_ATTRIBUTES, - ATMOP_REJECT_INCOMING_CALL, - ATMOP_SET_CONNECTION_ATTRIBUTES, - ATMOP_WAIT_ON_INCOMING_CALL, - ATMOP_SET_CONNECTION_ATTRIBUTES_X, - ATMOP_QUERY_CONNECTION_ATTRIBUTES_X, - ATMOP_QUERY_STATE -}; -.Ed -.Pp -These codes correspond directly to the operations specified in the ATM -Forum document with the following exceptions: -.Bl -tag -width foo -.It Dv ATMOP_RESP -As discussed in -.Xr ng_uni 4 , -this is used to -.Dq synchronify -the interface. -The argument is a -.Bd -literal -struct atm_resp { - int32_t resp; - uint32_t data; /* type of attached data */ -}; -.Ed -.Pp -If the response code -.Va resp -is zero, the node has accepted the user request. -If something goes wrong, -.Va resp -contains an error code. -For requests that return data, -.Va data -contains a code describing the type of data and the data itself -starts immediately after the structure. -.It Dv ATMOP_QUERY_CONNECTION_ATTRIBUTES_X -This is the same as -.Dv ATMOP_QUERY_CONNECTION_ATTRIBUTES -except that it allows to query several attributes -within one request. -.It Dv ATMOP_SET_CONNECTION_ATTRIBUTES_X -This is the same as -.Dv ATMOP_SET_CONNECTION_ATTRIBUTES -except that it allows to set several attributes -within one request. -The list of attributes is followed directly by the attributes in the same -order as they appear in the list. -.El -.Pp -If a user hook is disconnected, an active connection on that hook is released. -Incoming connections waiting to be accepted are reoffered to other -listening hooks or rejected. -.Sh CONTROL MESSAGES -Besides the generic messages the node understands the following special -messages: -.Bl -tag -width foo -.It Dv NGM_CCATM_DUMP Pq Ic dump -This causes the internal state of the node to be dumped in ASCII to the -.Va dump -hook. -.It Dv NGM_CCATM_STOP Pq Ic stop -This message causes all connections on that port to be aborted (not released!\&) -and all ATM endpoints which are bound to that port to be closed. -It stops processing of all messages from the UNI stack on that port UNI stack. -The argument is a -.Bd -literal -struct ngm_ccatm_port { - uint32_t port; -}; -.Ed -.It Dv NGM_CCATM_START Pq Ic start -Start processing on the port. -The argument is a -.Vt ngm_ccatm_port -structure. -.It Dv NGM_CCATM_CLEAR Pq Ic clear -This message takes a -.Vt ngm_ccatm_port -structure and clears all prefixes and addresses on that port. -If the port number is zero, all ports are cleared. -.It Dv NGM_CCATM_GET_ADDRESSES Pq Ic get_addresses -Get the list of all registered addresses on the given port. -The argument is a -.Vt ngm_ccatm_port -structure and the result is a -.Vt ngm_ccatm_get_addresses -structure: -.Bd -literal -struct ngm_ccatm_get_addresses { - uint32_t count; - struct ngm_ccatm_address_req addr[0]; -}; -struct ngm_ccatm_address_req { - uint32_t port; - struct uni_addr addr; -}; -.Ed -.Pp -If the -.Va port -field is zero in the request, all addresses on all ports -are returned. -If it is not zero, only the addresses on that port are reported. -The number of addresses is returned in the -.Va count -field. -.It Dv NGM_CCATM_ADDRESS_REGISTERED Pq Ic address_reg -This message is used by ILMI to inform the -.Nm -node that a previous address registration request was successful. -This causes the node to activate that address. -The argument to the message is a -.Vt ngm_ccatm_address_req -structure. -.It Dv NGM_CCATM_ADDRESS_UNREGISTERED Pq Ic address_unreg -This message is used by ILMI to inform the -.Nm -node that an address has been unregistered. -The node clears that address from its tables. -The argument is a -.Vt ngm_ccatm_address_req -structure. -.It Dv NGM_CCATM_SET_PORT_PARAM Pq Ic set_port_param -This request sets the parameters on the given port. -The argument is a -.Bd -literal -struct ngm_ccatm_atm_port { - uint32_t port; /* port for which to set parameters */ - uint32_t pcr; /* port peak cell rate */ - uint32_t max_vpi_bits; - uint32_t max_vci_bits; - uint32_t max_svpc_vpi; - uint32_t max_svcc_vpi; - uint32_t min_svcc_vci; - uint8_t esi[6]; - uint32_t num_addr; -}; -.Ed -.Pp -This should be used only by ILMI and when that port is stopped and the -address and prefix tables of that port are empty. -The -.Va num_addr -field is ignored. -.It Dv NGM_CCATM_GET_PORT_PARAM Pq Ic get_port_param -Retrieve the parameters of the given port. -The argument is a -.Vt ngm_ccatm_port -and the result a -.Vt ngm_ccatm_atm_port . -.It Dv NGM_CCATM_GET_PORTLIST Pq Ic get_portlist -Get a list of all available ports on that node. -This is returned as a -.Bd -literal -struct ngm_ccatm_portlist { - uint32_t nports; - uint32_t ports[]; -}; -.Ed -.It Dv NGM_CCATM_GETSTATE Pq Ic getstate -Return the state of a port. -The argument is a -.Vt "struct ngm_ccatm_port" -and the return values as a -.Vt uint32_t . -.It Dv NGM_CCATM_SETLOG Pq Ic setlog -This requests sets a new logging level and returns the previous one. -The argument is either a -.Vt uint32_t -in which case it specifies the new logging level, or may be empty -in which case just the old level is returned as a -.Vt uint32_t . -.It Dv NGM_CCATM_RESET Pq Ic reset -Reset the node. -This is allowed only if the number of user hooks and connected UNI stacks is -zero. -.It Dv NGM_CCATM_GET_EXSTAT -Return extended status information from the node. -.El -.Sh SEE ALSO -.Xr netgraph 4 , -.Xr ng_uni 4 , -.Xr ngctl 8 -.Sh AUTHORS -.An Harti Brandt Aq Mt harti@FreeBSD.org |