1 files changed, 75 insertions, 0 deletions
diff --git a/sys/contrib/device-tree/Bindings/input/touchscreen/ti.tsc2007.yaml b/sys/contrib/device-tree/Bindings/input/touchscreen/ti.tsc2007.yaml
new file mode 100644
index 000000000000..8bb4bc7df4fa
--- /dev/null
+++ b/sys/contrib/device-tree/Bindings/input/touchscreen/ti.tsc2007.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti.tsc2007.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments tsc2007 touchscreen controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: ti,tsc2007
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,x-plate-ohms:
+    description: X-plate resistance in ohms.
+
+  gpios: true
+
+  pendown-gpio: true
+
+  ti,max-rt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum pressure.
+
+  ti,fuzzx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      specifies the absolute input fuzz x value.
+      If set, it will permit noise in the data up to +- the value given to the fuzz
+      parameter, that is used to filter noise from the event stream.
+
+  ti,fuzzy:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies the absolute input fuzz y value.
+
+  ti,fuzzz:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies the absolute input fuzz z value.
+
+  ti,poll-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      how much time to wait (in milliseconds) before reading again the
+      values from the tsc2007.
+
+required:
+  - compatible
+  - reg
+  - ti,x-plate-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touch@49 {
+           compatible = "ti,tsc2007";
+           reg = <0x49>;
+           interrupt-parent = <&gpio4>;
+           interrupts = <0x0 0x8>;
+           gpios = <&gpio4 0 0>;
+           ti,x-plate-ohms = <180>;
+        };
+    };