diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/media')
57 files changed, 3201 insertions, 153 deletions
diff --git a/sys/contrib/device-tree/Bindings/media/amlogic,meson6-ir.yaml b/sys/contrib/device-tree/Bindings/media/amlogic,meson6-ir.yaml index 3f9fa92703bb..0f95fe8dd9ac 100644 --- a/sys/contrib/device-tree/Bindings/media/amlogic,meson6-ir.yaml +++ b/sys/contrib/device-tree/Bindings/media/amlogic,meson6-ir.yaml @@ -19,6 +19,7 @@ properties: - amlogic,meson6-ir - amlogic,meson8b-ir - amlogic,meson-gxbb-ir + - amlogic,meson-s4-ir - items: - const: amlogic,meson-gx-ir - const: amlogic,meson-gxbb-ir diff --git a/sys/contrib/device-tree/Bindings/media/amphion,vpu.yaml b/sys/contrib/device-tree/Bindings/media/amphion,vpu.yaml index a9d80eaeeeb6..c0d83d755239 100644 --- a/sys/contrib/device-tree/Bindings/media/amphion,vpu.yaml +++ b/sys/contrib/device-tree/Bindings/media/amphion,vpu.yaml @@ -47,7 +47,7 @@ patternProperties: $ref: ../mailbox/fsl,mu.yaml# - "^vpu_core@[0-9a-f]+$": + "^vpu-core@[0-9a-f]+$": description: Each core correspond a decoder or encoder, need to configure them separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC @@ -143,7 +143,7 @@ examples: power-domains = <&pd IMX_SC_R_VPU_MU_2>; }; - vpu_core0: vpu_core@2d080000 { + vpu_core0: vpu-core@2d080000 { compatible = "nxp,imx8q-vpu-decoder"; reg = <0x2d080000 0x10000>; power-domains = <&pd IMX_SC_R_VPU_DEC_0>; @@ -154,7 +154,7 @@ examples: memory-region = <&decoder_boot>, <&decoder_rpc>; }; - vpu_core1: vpu_core@2d090000 { + vpu_core1: vpu-core@2d090000 { compatible = "nxp,imx8q-vpu-encoder"; reg = <0x2d090000 0x10000>; power-domains = <&pd IMX_SC_R_VPU_ENC_0>; @@ -165,7 +165,7 @@ examples: memory-region = <&encoder1_boot>, <&encoder1_rpc>; }; - vpu_core2: vpu_core@2d0a0000 { + vpu_core2: vpu-core@2d0a0000 { reg = <0x2d0a0000 0x10000>; compatible = "nxp,imx8q-vpu-encoder"; power-domains = <&pd IMX_SC_R_VPU_ENC_1>; diff --git a/sys/contrib/device-tree/Bindings/media/cdns,csi2rx.yaml b/sys/contrib/device-tree/Bindings/media/cdns,csi2rx.yaml new file mode 100644 index 000000000000..2008a47c0580 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/cdns,csi2rx.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MIPI-CSI2 RX controller + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +description: + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI + lanes in input, and 4 different pixel streams in output. + +properties: + compatible: + items: + - enum: + - starfive,jh7110-csi2rx + - ti,j721e-csi2rx + - const: cdns,csi2rx + + reg: + maxItems: 1 + + clocks: + items: + - description: CSI2Rx system clock + - description: Gated Register bank clock for APB interface + - description: pixel Clock for Stream interface 0 + - description: pixel Clock for Stream interface 1 + - description: pixel Clock for Stream interface 2 + - description: pixel Clock for Stream interface 3 + + clock-names: + items: + - const: sys_clk + - const: p_clk + - const: pixel_if0_clk + - const: pixel_if1_clk + - const: pixel_if2_clk + - const: pixel_if3_clk + + resets: + items: + - description: CSI2Rx system reset + - description: Gated Register bank reset for APB interface + - description: pixel reset for Stream interface 0 + - description: pixel reset for Stream interface 1 + - description: pixel reset for Stream interface 2 + - description: pixel reset for Stream interface 3 + + reset-names: + items: + - const: sys + - const: reg_bank + - const: pixel_if0 + - const: pixel_if1 + - const: pixel_if2 + - const: pixel_if3 + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 + + clock-lanes: + const: 0 + + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 0 Output port node + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 1 Output port node + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 2 Output port node + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 3 Output port node + + required: + - port@0 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + csi@d060000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0d060000 0x1000>; + clocks = <&byteclock 7>, <&byteclock 6>, + <&coreclock 8>, <&coreclock 9>, + <&coreclock 10>, <&coreclock 11>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + resets = <&bytereset 9>, <&bytereset 4>, + <&corereset 5>, <&corereset 6>, + <&corereset 7>, <&corereset 8>; + reset-names = "sys", "reg_bank", + "pixel_if0", "pixel_if1", + "pixel_if2", "pixel_if3"; + phys = <&csi_phy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2rx_in_sensor: endpoint { + remote-endpoint = <&sensor_out_csi2rx>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + csi2rx_out_grabber0: endpoint { + remote-endpoint = <&grabber0_in_csi2rx>; + }; + }; + + port@2 { + reg = <2>; + + csi2rx_out_grabber1: endpoint { + remote-endpoint = <&grabber1_in_csi2rx>; + }; + }; + + port@3 { + reg = <3>; + + csi2rx_out_grabber2: endpoint { + remote-endpoint = <&grabber2_in_csi2rx>; + }; + }; + + port@4 { + reg = <4>; + + csi2rx_out_grabber3: endpoint { + remote-endpoint = <&grabber3_in_csi2rx>; + }; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/cec/nvidia,tegra114-cec.yaml b/sys/contrib/device-tree/Bindings/media/cec/nvidia,tegra114-cec.yaml index 369c48fd9bf9..a6b73498bc21 100644 --- a/sys/contrib/device-tree/Bindings/media/cec/nvidia,tegra114-cec.yaml +++ b/sys/contrib/device-tree/Bindings/media/cec/nvidia,tegra114-cec.yaml @@ -53,6 +53,5 @@ examples: interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_CEC>; clock-names = "cec"; - status = "disabled"; hdmi-phandle = <&hdmi>; }; diff --git a/sys/contrib/device-tree/Bindings/media/cnm,wave521c.yaml b/sys/contrib/device-tree/Bindings/media/cnm,wave521c.yaml new file mode 100644 index 000000000000..6a11c1d11fb5 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/cnm,wave521c.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cnm,wave521c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chips&Media Wave 5 Series multi-standard codec IP + +maintainers: + - Nas Chung <nas.chung@chipsnmedia.com> + - Jackson Lee <jackson.lee@chipsnmedia.com> + +description: + The Chips&Media WAVE codec IP is a multi format video encoder/decoder + +properties: + compatible: + items: + - enum: + - ti,j721s2-wave521c + - const: cnm,wave521c + + reg: + maxItems: 1 + + clocks: + items: + - description: VCODEC clock + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The VPU uses the SRAM to store some of the reference data instead of + storing it on DMA memory. It is mainly used for the purpose of reducing + bandwidth. + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + vpu: video-codec@12345678 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x12345678 0x1000>; + clocks = <&clks 42>; + interrupts = <42>; + sram = <&sram>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/alliedvision,alvium-csi2.yaml b/sys/contrib/device-tree/Bindings/media/i2c/alliedvision,alvium-csi2.yaml new file mode 100644 index 000000000000..d3329e991d16 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/alliedvision,alvium-csi2.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allied Vision Alvium Camera + +maintainers: + - Tommaso Merciai <tomm.merciai@gmail.com> + - Martin Hecht <martin.hecht@avnet.eu> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: alliedvision,alvium-csi2 + + reg: + maxItems: 1 + + vcc-ext-in-supply: + description: | + The regulator that supplies power to the VCC_EXT_IN pins. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + data-lanes: + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - vcc-ext-in-supply + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + alvium: camera@3c { + compatible = "alliedvision,alvium-csi2"; + reg = <0x3c>; + vcc-ext-in-supply = <®_vcc_ext_in>; + + port { + alvium_out: endpoint { + remote-endpoint = <&mipi_csi_0_in>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <681250000>; + }; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/asahi-kasei,ak7375.yaml b/sys/contrib/device-tree/Bindings/media/i2c/asahi-kasei,ak7375.yaml index 22a810fc7222..fe312cc6a873 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/asahi-kasei,ak7375.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/asahi-kasei,ak7375.yaml @@ -15,7 +15,9 @@ description: properties: compatible: - const: asahi-kasei,ak7375 + enum: + - asahi-kasei,ak7345 + - asahi-kasei,ak7375 reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/media/i2c/galaxycore,gc0308.yaml b/sys/contrib/device-tree/Bindings/media/i2c/galaxycore,gc0308.yaml new file mode 100644 index 000000000000..f81e7daed67b --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/galaxycore,gc0308.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Galaxycore GC0308 and GC0309 Image Sensors + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors + programmable through an I2C interface and connected via parallel bus. + They include an ISP capable of auto exposure and auto white balance. + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + oneOf: + - const: galaxycore,gc0308 + - items: + - const: galaxycore,gc0309 + - const: galaxycore,gc0308 + + reg: + const: 0x21 + + clocks: + description: Reference to the xclk clock. + maxItems: 1 + + reset-gpios: + description: GPIO descriptor for the reset pin. + maxItems: 1 + + powerdown-gpios: + description: GPIO descriptor for the powerdown pin. + maxItems: 1 + + vdd28-supply: + description: 2.8V supply + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-width: true + data-shift: true + hsync-active: true + vsync-active: true + data-active: true + pclk-sample: true + + required: + - bus-width + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - powerdown-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@21 { + compatible = "galaxycore,gc0308"; + reg = <0x21>; + clocks = <&camera_clk>; + powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + vdd28-supply = <&vdd28>; + + port { + gc0308_ep: endpoint { + remote-endpoint = <¶llel_from_gc0308>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <1>; /* active high */ + vsync-active = <1>; /* active high */ + data-active = <1>; /* active high */ + pclk-sample = <1>; /* sample on rising edge */ + }; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/galaxycore,gc2145.yaml b/sys/contrib/device-tree/Bindings/media/i2c/galaxycore,gc2145.yaml new file mode 100644 index 000000000000..1726ecca4c77 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/galaxycore,gc2145.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Galaxy Core 1/5'' UXGA CMOS Image Sensor + +maintainers: + - Alain Volmat <alain.volmat@foss.st.com> + +description: + The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile + phone camera applications and digital camera products. GC2145 incorporates a + 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal + processor allowing AE/AWB/interpolation/de-noise/color-conversion and + gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the + sensor. It is programmable through an I2C interface. Image data is sent + either through a parallel interface or through MIPI CSI-2. + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + const: galaxycore,gc2145 + + reg: + const: 0x3c + + clocks: + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + iovdd-supply: + description: Power Supply for I/O circuits (1.7 - 3V). + + avdd-supply: + description: Power for analog circuit/sensor array (2.7 - 3V). + + dvdd-supply: + description: Power for digital core (1.7 - 1.9V). + + orientation: true + + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + required: + - link-frequencies + + required: + - endpoint + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - powerdown-gpios + - reset-gpios + - iovdd-supply + - avdd-supply + - dvdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "galaxycore,gc2145"; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + iovdd-supply = <&scmi_v3v3_sw>; + avdd-supply = <&scmi_v3v3_sw>; + dvdd-supply = <&scmi_v3v3_sw>; + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + + port { + endpoint { + remote-endpoint = <&mipid02_0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <120000000 192000000 240000000>; + }; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml b/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml index 1e2df8cf2937..60f19e1152b3 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml @@ -14,6 +14,9 @@ description: |- interface and CCI (I2C compatible) control bus. The output format is raw Bayer. +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + properties: compatible: const: hynix,hi846 @@ -86,7 +89,7 @@ required: - vddd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -109,6 +112,8 @@ examples: vddio-supply = <®_camera_vddio>; reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; + orientation = <0>; + rotation = <0>; port { camera_out: endpoint { diff --git a/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml b/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml new file mode 100644 index 000000000000..f6b87892068a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: onsemi 1/6-inch 720p CMOS Digital Image Sensor + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor + with an active pixel-array size of 1296H x 976V. It is programmable through + an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI + CSI-2 connection. + +properties: + compatible: + const: onnn,mt9m114 + + reg: + description: I2C device address + enum: + - 0x48 + - 0x5d + + clocks: + description: EXTCLK clock signal + maxItems: 1 + + vdd-supply: + description: + Core digital voltage supply, 1.8V + + vddio-supply: + description: + I/O digital voltage supply, 1.8V or 2.8V + + vaa-supply: + description: + Analog voltage supply, 2.8V + + reset-gpios: + description: |- + Reference to the GPIO connected to the RESET_BAR pin, if any (active + low). + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: [4, 5, 6] + + link-frequencies: true + remote-endpoint: true + + # The number and mapping of lanes (for CSI-2), and the bus width and + # signal polarities (for parallel and BT.656) are fixed and must not + # be specified. + + required: + - bus-type + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdd-supply + - vddio-supply + - vaa-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "onnn,mt9m114"; + reg = <0x48>; + + clocks = <&clk24m 0>; + + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + + vddio-supply = <®_cam_1v8>; + vdd-supply = <®_cam_1v8>; + vaa-supply = <®_2p8v>; + + port { + endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + link-frequencies = /bits/ 64 <384000000>; + remote-endpoint = <&mipi_csi_in>; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ov8856.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ov8856.yaml index 57f5e48fd8e0..816dac9c6f60 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ov8856.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ov8856.yaml @@ -67,19 +67,17 @@ properties: properties: data-lanes: - description: |- - The driver only supports four-lane operation. - items: - - const: 1 - - const: 2 - - const: 3 - - const: 4 - - link-frequencies: - description: Frequencies listed are driver, not h/w limitations. - maxItems: 2 - items: - enum: [ 360000000, 180000000 ] + oneOf: + - items: + - const: 1 + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 required: - link-frequencies diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02a10.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02a10.yaml index 763cebe03dc2..67c1c291327b 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02a10.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02a10.yaml @@ -68,12 +68,6 @@ properties: marked GPIO_ACTIVE_LOW. maxItems: 1 - rotation: - enum: - - 0 # Sensor Mounted Upright - - 180 # Sensor Mounted Upside Down - default: 0 - port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false @@ -114,7 +108,7 @@ required: - reset-gpios - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov4689.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov4689.yaml index 50579c947f3c..d96199031b66 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov4689.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov4689.yaml @@ -52,10 +52,6 @@ properties: description: GPIO connected to the reset pin (active low) - orientation: true - - rotation: true - port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false @@ -95,7 +91,7 @@ required: - dvdd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5640.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5640.yaml index a621032f9bd0..2c5e69356658 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5640.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5640.yaml @@ -44,11 +44,6 @@ properties: description: > Reference to the GPIO connected to the reset pin, if any. - rotation: - enum: - - 0 - - 180 - port: description: Digital Output Port $ref: /schemas/graph.yaml#/$defs/port-base @@ -85,7 +80,7 @@ required: - DOVDD-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5642.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5642.yaml new file mode 100644 index 000000000000..01f8b2b3fd17 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5642.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5642 Image Sensor + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov5642 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + AVDD-supply: + description: Analog voltage supply, 2.8V. + + DVDD-supply: + description: Digital core voltage supply, 1.5V. + + DOVDD-supply: + description: Digital I/O voltage supply, 1.8V. + + powerdown-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the powerdown pin, if any. + + reset-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the reset pin, if any. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + bus-width: + enum: [8, 10] + default: 10 + + data-shift: + enum: [0, 2] + default: 0 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + allOf: + - if: + properties: + bus-type: + const: 6 + then: + properties: + hsync-active: false + vsync-active: false + + - if: + properties: + bus-width: + const: 10 + then: + properties: + data-shift: + const: 0 + + required: + - bus-type + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5642"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clk_ext_camera>; + DOVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen3_reg>; + DVDD-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + ov5642_to_parallel: endpoint { + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; + remote-endpoint = <¶llel_from_ov5642>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5693.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5693.yaml index 359dc08440a8..3368b3bd8ef2 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5693.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5693.yaml @@ -5,26 +5,41 @@ $id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Omnivision OV5693 CMOS Sensor +title: Omnivision OV5693/OV5695 CMOS Sensors maintainers: - - Tommaso Merciai <tommaso.merciai@amarulasolutions.com> + - Tommaso Merciai <tomm.merciai@gmail.com> description: | - The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS - image sensor that delivers 2592x1944 at 30fps. It provides full-frame, + The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS + image sensors that deliver 2592x1944 at 30fps. It provides full-frame, sub-sampled, and windowed 10-bit MIPI images in various formats via the Serial Camera Control Bus (SCCB) interface. - OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB). - The sensor output is available via CSI-2 serial data output (up to 2-lane). + OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus + (SCCB). The sensor output is available via CSI-2 serial data output (up to + 2-lane). allOf: - $ref: /schemas/media/video-interface-devices.yaml# + - if: + properties: + compatible: + contains: + const: ovti,ov5693 + then: + properties: + port: + properties: + endpoint: + required: + - link-frequencies properties: compatible: - const: ovti,ov5693 + enum: + - ovti,ov5693 + - ovti,ov5695 reg: maxItems: 1 @@ -34,6 +49,9 @@ properties: System input clock (aka XVCLK). From 6 to 27 MHz. maxItems: 1 + clock-names: + const: xvclk + dovdd-supply: description: Digital I/O voltage supply, 1.8V. @@ -72,7 +90,6 @@ properties: required: - data-lanes - - link-frequencies required: - compatible diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov64a40.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov64a40.yaml new file mode 100644 index 000000000000..2b6143aff391 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov64a40.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV64A40 Image Sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov64a40 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + avdd-supply: + description: Analog voltage supply, 2.8 volts + + dvdd-supply: + description: Digital core voltage supply, 1.1 volts + + dovdd-supply: + description: Digital I/O voltage supply, 1.8 volts + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: + - 1 # MIPI CSI-2 C-PHY + - 4 # MIPI CSI-2 D-PHY + data-lanes: true + link-frequencies: true + clock-noncontinuous: true + remote-endpoint: true + + required: + - bus-type + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@36 { + compatible = "ovti,ov64a40"; + reg = <0x36>; + clocks = <&camera_clk>; + dovdd-supply = <&vgen4_reg>; + avdd-supply = <&vgen3_reg>; + dvdd-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + rotation = <180>; + orientation = <2>; + + port { + endpoint { + remote-endpoint = <&mipi_csi2_in>; + bus-type = <4>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7251.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7251.yaml new file mode 100644 index 000000000000..2e5187acbbb8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7251.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV7251 Image Sensor + +description: + The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor + with an active array size of 640H x 480V. It is programmable through a serial + I2C interface. + +maintainers: + - Todor Tomov <todor.too@gmail.com> + +properties: + compatible: + const: ovti,ov7251 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-names: + const: xclk + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + vdda-supply: + description: Analog voltage supply, 2.8 volts + + vddd-supply: + description: Digital core voltage supply, 1.2 volts + + vdddo-supply: + description: Digital I/O voltage supply, 1.8 volts + + enable-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity + is GPIO_ACTIVE_HIGH. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maximum: 1 + + data-lanes: + maxItems: 1 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdddo-supply + - vdda-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov7251"; + reg = <0x3c>; + clocks = <&clks 1>; + clock-frequency = <24000000>; + vdddo-supply = <&ov7251_vdddo_1v8>; + vdda-supply = <&ov7251_vdda_2v8>; + vddd-supply = <&ov7251_vddd_1v5>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + + port { + ov7251_ep: endpoint { + remote-endpoint = <&csi0_ep>; + clock-lanes = <1>; + data-lanes = <0>; + link-frequencies = /bits/ 64 <240000000 319200000>; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml index e2470dd5920c..60903da84e1f 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml @@ -91,7 +91,7 @@ required: - vddd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml index a167dcdb3a32..106c36ee966d 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml @@ -32,6 +32,15 @@ properties: description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz maxItems: 1 + avdd-supply: + description: Analog power supply (2.9V) + + ovdd-supply: + description: Interface power supply (1.8V) + + dvdd-supply: + description: Digital power supply (1.2V) + reset-gpios: description: Reference to the GPIO connected to the XCLR pin, if any. maxItems: 1 @@ -79,6 +88,10 @@ examples: assigned-clock-parents = <&imx335_clk_parent>; assigned-clock-rates = <24000000>; + avdd-supply = <&camera_vdda_2v9>; + ovdd-supply = <&camera_vddo_1v8>; + dvdd-supply = <&camera_vddd_1v2>; + port { imx335: endpoint { remote-endpoint = <&cam>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml index ffccf5f3c9e3..9a00dab2e8a3 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml @@ -44,16 +44,9 @@ properties: description: Sensor reset (XCLR) GPIO maxItems: 1 - flash-leds: true - - lens-focus: true - - orientation: true - - rotation: true - port: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false properties: endpoint: @@ -88,7 +81,7 @@ required: - ovdd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml b/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml index 19a39d753aad..b68141264c0e 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml @@ -143,7 +143,6 @@ examples: mipid02: csi2rx@14 { compatible = "st,st-mipid02"; reg = <0x14>; - status = "okay"; clocks = <&clk_ext_camera_12>; clock-names = "xclk"; VDDE-supply = <&vdd>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/techwell,tw9900.yaml b/sys/contrib/device-tree/Bindings/media/i2c/techwell,tw9900.yaml new file mode 100644 index 000000000000..e37317f81072 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/techwell,tw9900.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Techwell TW9900 NTSC/PAL video decoder + +maintainers: + - Mehdi Djait <mehdi.djait@bootlin.com> + +description: + The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards + with auto-detection features. + +properties: + compatible: + const: techwell,tw9900 + + reg: + maxItems: 1 + + vdd-supply: + description: VDD power supply + + reset-gpios: + description: GPIO descriptor for the RESET input pin + maxItems: 1 + + powerdown-gpios: + description: GPIO descriptor for the POWERDOWN input pin + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Analog input port + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: CVBS over MUX0 + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: CVBS over MUX1 + + endpoint@2: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Chroma over CIN0 and Y over MUX0 + + endpoint@3: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Chroma over CIN0 and Y over MUX1 + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for the decoder output. + + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/sdtv-standards.h> + #include <dt-bindings/gpio/gpio.h> + + composite_connector { + compatible = "composite-video-connector"; + label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; + + port { + composite_to_tw9900: endpoint { + remote-endpoint = <&tw9900_to_composite>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + video-decoder@44 { + compatible = "techwell,tw9900"; + reg = <0x44>; + + vdd-supply = <&tw9900_supply>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + tw9900_to_composite: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite_to_tw9900>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&cif_in>; + }; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml b/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml new file mode 100644 index 000000000000..1978fbb77a6c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Ideas on Board +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: THine THP7312 + +maintainers: + - Paul Elder <paul.elder@@ideasonboard.com> + +description: + The THP7312 is a standalone ISP controlled over i2c, and is capable of + various image processing and correction functions, including 3A control. It + can be connected to CMOS image sensors from various vendors, supporting both + MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2 + or parallel. The hardware is capable of transmitting and receiving MIPI + interlaved data strams with data types or multiple virtual channel + identifiers. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: thine,thp7312 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: CLKI clock input + + thine,boot-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 1 + description: + Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap. + 0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from + external flash ROM). + + reset-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the RESET_N pin, if any. + Must be released (set high) after all supplies are applied. + + vddcore-supply: + description: + 1.2V supply for core, PLL, MIPI rx and MIPI tx. + + vhtermrx-supply: + description: + Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel. + + vddtx-supply: + description: + Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel. + + vddhost-supply: + description: + Supply for host interface. 1.8V, 2.8V, or 3.3V. + + vddcmos-supply: + description: + Supply for sensor interface. 1.8V, 2.8V, or 3.3V. + + vddgpio-0-supply: + description: + Supply for GPIO_0. 1.8V, 2.8V, or 3.3V. + + vddgpio-1-supply: + description: + Supply for GPIO_1. 1.8V, 2.8V, or 3.3V. + + orientation: true + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 # CSI-2 D-PHY + + data-lanes: + description: + This property is for lane reordering between the THP7312 and the + SoC. The sensor supports either two-lane, or four-lane operation. + If this property is omitted four-lane operation is assumed. For + two-lane operation the property must be set to <1 2>. + minItems: 2 + maxItems: 4 + items: + maximum: 4 + + sensors: + type: object + description: List of connected sensors + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^sensor@[01]$": + type: object + description: + Sensors connected to the first and second input, with one node per + sensor. + + properties: + thine,model: + $ref: /schemas/types.yaml#/definitions/string + description: + Model of the connected sensors. Must be a valid compatible string. + + reg: + description: THP7312 input port number + items: + - maximum: 1 + + data-lanes: + $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes + items: + maxItems: 4 + description: + This property is for lane reordering between the THP7312 and the imaging + sensor that it is connected to. + + required: + - reg + - data-lanes + + additionalProperties: false + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + +required: + - compatible + - reg + - reset-gpios + - clocks + - vddcore-supply + - vhtermrx-supply + - vddtx-supply + - vddhost-supply + - vddcmos-supply + - vddgpio-0-supply + - vddgpio-1-supply + - sensors + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@61 { + compatible = "thine,thp7312"; + reg = <0x61>; + + pinctrl-names = "default"; + pinctrl-0 = <&cam1_pins_default>; + + reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>; + clocks = <&camera61_clk>; + + vddcore-supply = <&vsys_v4p2>; + vhtermrx-supply = <&vsys_v4p2>; + vddtx-supply = <&vsys_v4p2>; + vddhost-supply = <&vsys_v4p2>; + vddcmos-supply = <&vsys_v4p2>; + vddgpio-0-supply = <&vsys_v4p2>; + vddgpio-1-supply = <&vsys_v4p2>; + + orientation = <0>; + rotation = <0>; + + sensors { + #address-cells = <1>; + #size-cells = <0>; + + sensor@0 { + thine,model = "sony,imx258"; + reg = <0>; + + data-lanes = <4 1 3 2>; + }; + }; + + port { + thp7312_2_endpoint: endpoint { + remote-endpoint = <&mipi_thp7312_2>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + data-lanes = <4 2 1 3>; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub913.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub913.yaml new file mode 100644 index 000000000000..f6612bb0f667 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub913.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub913.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB913 FPD-Link III Serializer + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB913 is an FPD-Link III video serializer for parallel video. + +properties: + compatible: + enum: + - ti,ds90ub913a-q1 + + '#gpio-cells': + const: 2 + description: + First cell is the GPO pin number, second cell is the flags. The GPO pin + number must be in range of [0, 3]. Note that GPOs 2 and 3 are not + available in external oscillator mode. + + gpio-controller: true + + clocks: + maxItems: 1 + description: + Reference clock connected to the CLKIN pin. + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Parallel input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - pclk-sample + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: FPD-Link III output port + + required: + - port@0 + - port@1 + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + +required: + - compatible + - '#gpio-cells' + - gpio-controller + - '#clock-cells' + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serializer { + compatible = "ti,ds90ub913a-q1"; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clk_cam_48M>; + clock-names = "clkin"; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub913_in: endpoint { + remote-endpoint = <&sensor_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&fixed_clock>; + + port { + sensor_out: endpoint { + remote-endpoint = <&ub913_in>; + }; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml new file mode 100644 index 000000000000..2030366994d1 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub953.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB953 FPD-Link III Serializer + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB953 is an FPD-Link III video serializer for MIPI CSI-2. + +properties: + compatible: + enum: + - ti,ds90ub953-q1 + - ti,ds90ub971-q1 + + '#gpio-cells': + const: 2 + description: + First cell is the GPIO pin number, second cell is the flags. The GPIO pin + number must be in range of [0, 3]. + + gpio-controller: true + + clocks: + maxItems: 1 + description: + Reference clock connected to the CLKIN pin. + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: FPD-Link III output port + + required: + - port@0 + - port@1 + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + +required: + - compatible + - '#gpio-cells' + - gpio-controller + - '#clock-cells' + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serializer { + compatible = "ti,ds90ub953-q1"; + + gpio-controller; + #gpio-cells = <2>; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub953_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; + + clocks = <&serializer>; + clock-names = "inck"; + + port { + sensor_out: endpoint { + remote-endpoint = <&ub953_in>; + }; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml new file mode 100644 index 000000000000..0b71e6f911a8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml @@ -0,0 +1,428 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO + forwarding. + +allOf: + - $ref: /schemas/i2c/i2c-atr.yaml# + +properties: + compatible: + enum: + - ti,ds90ub960-q1 + - ti,ds90ub9702-q1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Reference clock connected to the REFCLK pin. + + clock-names: + items: + - const: refclk + + powerdown-gpios: + maxItems: 1 + description: + Specifier for the GPIO connected to the PDB pin. + + i2c-alias-pool: + minItems: 1 + maxItems: 32 + + links: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ti,manual-strobe: + type: boolean + description: + Enable manual strobe position and EQ level + + patternProperties: + '^link@[0-3]$': + type: object + additionalProperties: false + properties: + reg: + description: The link number + maxItems: 1 + + i2c-alias: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The I2C address used for the serializer. Transactions to this + address on the I2C bus where the deserializer resides are + forwarded to the serializer. + + ti,rx-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # RAW10 + - 1 # RAW12 HF + - 2 # RAW12 LF + - 3 # CSI2 SYNC + - 4 # CSI2 NON-SYNC + description: + FPD-Link Input Mode. This should reflect the hardware and the + default mode of the connected device. + + ti,cdr-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # FPD-Link III + - 1 # FPD-Link IV + description: + FPD-Link CDR Mode. This should reflect the hardware and the + default mode of the connected device. + + ti,strobe-pos: + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -13 + maximum: 13 + description: Manual strobe position + + ti,eq-level: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 14 + description: Manual EQ level + + serializer: + type: object + description: FPD-Link Serializer node + + required: + - reg + - i2c-alias + - ti,rx-mode + - serializer + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 0 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 1 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 2 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 3 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output 0 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + link-frequencies: + maxItems: 1 + + required: + - data-lanes + - link-frequencies + + port@5: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output 1 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + link-frequencies: + maxItems: 1 + + required: + - data-lanes + - link-frequencies + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + deser@3d { + compatible = "ti,ds90ub960-q1"; + reg = <0x3d>; + + clock-names = "refclk"; + clocks = <&fixed_clock>; + + powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>; + + i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Port 0, Camera 0 */ + port@0 { + reg = <0>; + + ub960_fpd3_1_in: endpoint { + remote-endpoint = <&ub953_1_out>; + }; + }; + + /* Port 1, Camera 1 */ + port@1 { + reg = <1>; + + ub960_fpd3_2_in: endpoint { + remote-endpoint = <&ub913_2_out>; + hsync-active = <0>; + vsync-active = <1>; + }; + }; + + /* Port 2, unconnected */ + port@2 { + reg = <2>; + }; + + /* Port 3, unconnected */ + port@3 { + reg = <3>; + }; + + /* Port 4, CSI-2 TX */ + port@4 { + reg = <4>; + ds90ub960_0_csi_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <800000000>; + remote-endpoint = <&csi2_phy0>; + }; + }; + + /* Port 5, unconnected */ + port@5 { + reg = <5>; + }; + }; + + links { + #address-cells = <1>; + #size-cells = <0>; + + /* Link 0 has DS90UB953 serializer and IMX274 sensor */ + + link@0 { + reg = <0>; + i2c-alias = <0x44>; + + ti,rx-mode = <3>; + + serializer1: serializer { + compatible = "ti,ds90ub953-q1"; + + gpio-controller; + #gpio-cells = <2>; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub953_1_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_1_out>; + }; + }; + + port@1 { + reg = <1>; + + ub953_1_out: endpoint { + remote-endpoint = <&ub960_fpd3_1_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + + reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>; + + port { + sensor_1_out: endpoint { + remote-endpoint = <&ub953_1_in>; + }; + }; + }; + }; + }; + }; /* End of link@0 */ + + /* Link 1 has DS90UB913 serializer and MT9V111 sensor */ + + link@1 { + reg = <1>; + i2c-alias = <0x45>; + + ti,rx-mode = <0>; + + serializer2: serializer { + compatible = "ti,ds90ub913a-q1"; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clk_cam_48M>; + clock-names = "clkin"; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub913_2_in: endpoint { + remote-endpoint = <&sensor_2_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + ub913_2_out: endpoint { + remote-endpoint = <&ub960_fpd3_2_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&serializer2>; + + port { + sensor_2_out: endpoint { + remote-endpoint = <&ub913_2_in>; + }; + }; + }; + }; + }; + }; /* End of link@1 */ + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358746.yaml b/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358746.yaml index b8ba85a2416c..1c476b635b69 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358746.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358746.yaml @@ -12,7 +12,7 @@ maintainers: description: |- The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2 stream. The direction can be either parallel-in -> csi-out or csi-in -> - parallel-out The chip is programmable trough I2C and SPI but the SPI + parallel-out The chip is programmable through I2C and SPI but the SPI interface is only supported in parallel-in -> csi-out mode. Note that the current device tree bindings only support the @@ -69,6 +69,7 @@ properties: properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Input port properties: @@ -89,6 +90,7 @@ properties: port@1: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Output port properties: diff --git a/sys/contrib/device-tree/Bindings/media/i2c/tvp5150.txt b/sys/contrib/device-tree/Bindings/media/i2c/tvp5150.txt index 719b2995dc17..94b908ace53c 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/tvp5150.txt +++ b/sys/contrib/device-tree/Bindings/media/i2c/tvp5150.txt @@ -53,7 +53,7 @@ Optional Connector Properties: ============================== - sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechnism. Please look at + instead of using the autodetection mechanism. Please look at [1] for more information. [1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-fg.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-fg.yaml new file mode 100644 index 000000000000..03f31b009085 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-fg.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Film Grain + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add + the film grain according to the AOMedia Video 1 (AV1) standard. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-fg + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14002000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0x14002000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_FG>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-hdr.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-hdr.yaml new file mode 100644 index 000000000000..d4609bba6578 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-hdr.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 HDR + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + A Media Data Path 3 (MDP3) component used to perform conversion from + High Dynamic Range (HDR) to Standard Dynamic Range (SDR). + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-hdr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14004000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0x14004000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_HDR>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rdma.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rdma.yaml index 7032c7e15039..59db8306485b 100644 --- a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rdma.yaml +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rdma.yaml @@ -20,8 +20,14 @@ description: | properties: compatible: - items: - - const: mediatek,mt8183-mdp3-rdma + oneOf: + - enum: + - mediatek,mt8183-mdp3-rdma + - mediatek,mt8195-mdp3-rdma + - mediatek,mt8195-vdo1-rdma + - items: + - const: mediatek,mt8188-vdo1-rdma + - const: mediatek,mt8195-vdo1-rdma reg: maxItems: 1 @@ -45,6 +51,14 @@ properties: include/dt-bindings/gce/<chip>-gce.h of each chips. $ref: /schemas/types.yaml#/definitions/uint32-array + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the System Control Processor (SCP) used for initializing + and stopping the MDP3, for sending frame data locations to the MDP3's + VPU and to install Inter-Processor Interrupt handlers to control + processing states. + power-domains: maxItems: 1 @@ -52,6 +66,7 @@ properties: items: - description: RDMA clock - description: RSZ clock + minItems: 1 iommus: maxItems: 1 @@ -60,16 +75,72 @@ properties: items: - description: used for 1st data pipe from RDMA - description: used for 2nd data pipe from RDMA + - description: used for 3rd data pipe from RDMA + - description: used for 4th data pipe from RDMA + - description: used for the data pipe from SPLIT + minItems: 1 + + interrupts: + maxItems: 1 + + '#dma-cells': + const: 1 required: - compatible - reg - mediatek,gce-client-reg - - mediatek,gce-events - power-domains - clocks - iommus - - mboxes + - '#dma-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mdp3-rdma + + then: + properties: + clocks: + minItems: 2 + + mboxes: + minItems: 2 + + required: + - mboxes + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-rdma + + then: + properties: + clocks: + maxItems: 1 + + mboxes: + minItems: 5 + + required: + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-vdo1-rdma + + then: + properties: + clocks: + maxItems: 1 additionalProperties: false @@ -80,16 +151,17 @@ examples: #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/memory/mt8183-larb-port.h> - mdp3_rdma0: mdp3-rdma0@14001000 { - compatible = "mediatek,mt8183-mdp3-rdma"; - reg = <0x14001000 0x1000>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; - mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, - <CMDQ_EVENT_MDP_RDMA0_EOF>; - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - clocks = <&mmsys CLK_MM_MDP_RDMA0>, - <&mmsys CLK_MM_MDP_RSZ1>; - iommus = <&iommu>; - mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, - <&gce 21 CMDQ_THR_PRIO_LOWEST>; + dma-controller@14001000 { + compatible = "mediatek,mt8183-mdp3-rdma"; + reg = <0x14001000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, + <CMDQ_EVENT_MDP_RDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>; + iommus = <&iommu>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, + <&gce 21 CMDQ_THR_PRIO_LOWEST>; + #dma-cells = <1>; }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rsz.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rsz.yaml index 78f9de6192ef..f5676bec4326 100644 --- a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rsz.yaml +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-rsz.yaml @@ -15,9 +15,13 @@ description: | properties: compatible: - items: + oneOf: - enum: - mediatek,mt8183-mdp3-rsz + - items: + - enum: + - mediatek,mt8195-mdp3-rsz + - const: mediatek,mt8183-mdp3-rsz reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-stitch.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-stitch.yaml new file mode 100644 index 000000000000..d815bea29154 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-stitch.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 STITCH + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + One of Media Data Path 3 (MDP3) components used to combine multiple video frame + with overlapping fields of view to produce a segmented panorame. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-stitch + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14003000 { + compatible = "mediatek,mt8195-mdp3-stitch"; + reg = <0x14003000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_STITCH>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-tcc.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-tcc.yaml new file mode 100644 index 000000000000..14ea556d4f82 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-tcc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Tone Curve Conversion + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components. + It is used to handle the tone mapping of various gamma curves in order to + achieve HDR10 effects. This helps adapt the content to the color and + brightness range that standard display devices typically support. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tcc + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@1400b000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0x1400b000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TCC>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-tdshp.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-tdshp.yaml new file mode 100644 index 000000000000..8ab7f2d8e148 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-tdshp.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Two-Dimensional Sharpness + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component + used to perform image edge sharpening and enhance vividness and contrast. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tdshp + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14007000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0x14007000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-wrot.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-wrot.yaml index 0baa77198fa2..53a679338402 100644 --- a/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-wrot.yaml +++ b/sys/contrib/device-tree/Bindings/media/mediatek,mdp3-wrot.yaml @@ -15,9 +15,13 @@ description: | properties: compatible: - items: + oneOf: - enum: - mediatek,mt8183-mdp3-wrot + - items: + - enum: + - mediatek,mt8195-mdp3-wrot + - const: mediatek,mt8183-mdp3-wrot reg: maxItems: 1 @@ -50,6 +54,9 @@ properties: iommus: maxItems: 1 + '#dma-cells': + const: 1 + required: - compatible - reg @@ -58,6 +65,7 @@ required: - power-domains - clocks - iommus + - '#dma-cells' additionalProperties: false @@ -68,13 +76,14 @@ examples: #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/memory/mt8183-larb-port.h> - mdp3_wrot0: mdp3-wrot0@14005000 { - compatible = "mediatek,mt8183-mdp3-wrot"; - reg = <0x14005000 0x1000>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; - mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, - <CMDQ_EVENT_MDP_WROT0_EOF>; - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - clocks = <&mmsys CLK_MM_MDP_WROT0>; - iommus = <&iommu>; + dma-controller@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0x14005000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, + <CMDQ_EVENT_MDP_WROT0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu>; + #dma-cells = <1>; }; diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-decoder.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-decoder.yaml index fad59b486d5d..b401c67e3ba0 100644 --- a/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-decoder.yaml +++ b/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-decoder.yaml @@ -21,24 +21,33 @@ properties: - mediatek,mt8183-vcodec-dec reg: - maxItems: 12 + minItems: 11 + maxItems: 11 + + reg-names: + items: + - const: misc + - const: ld + - const: top + - const: cm + - const: ad + - const: av + - const: pp + - const: hwd + - const: hwq + - const: hwb + - const: hwg interrupts: maxItems: 1 clocks: + minItems: 1 maxItems: 8 clock-names: - items: - - const: vcodecpll - - const: univpll_d2 - - const: clk_cci400_sel - - const: vdec_sel - - const: vdecpll - - const: vencpll - - const: venc_lt_sel - - const: vdec_bus_clk_src + minItems: 1 + maxItems: 8 assigned-clocks: true @@ -66,6 +75,10 @@ properties: description: Describes point to scp. + mediatek,vdecsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the vdecsys syscon node. + required: - compatible - reg @@ -73,8 +86,7 @@ required: - clocks - clock-names - iommus - - assigned-clocks - - assigned-clock-parents + - mediatek,vdecsys allOf: - if: @@ -88,6 +100,15 @@ allOf: required: - mediatek,scp + properties: + clocks: + minItems: 1 + maxItems: 1 + + clock-names: + items: + - const: vdec + - if: properties: compatible: @@ -99,6 +120,22 @@ allOf: required: - mediatek,vpu + properties: + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: vcodecpll + - const: univpll_d2 + - const: clk_cci400_sel + - const: vdec_sel + - const: vdecpll + - const: vencpll + - const: venc_lt_sel + - const: vdec_bus_clk_src + additionalProperties: false examples: @@ -109,10 +146,9 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/power/mt8173-power.h> - vcodec_dec: vcodec@16000000 { + vcodec_dec: vcodec@16020000 { compatible = "mediatek,mt8173-vcodec-dec"; - reg = <0x16000000 0x100>, /*VDEC_SYS*/ - <0x16020000 0x1000>, /*VDEC_MISC*/ + reg = <0x16020000 0x1000>, /*VDEC_MISC*/ <0x16021000 0x800>, /*VDEC_LD*/ <0x16021800 0x800>, /*VDEC_TOP*/ <0x16022000 0x1000>, /*VDEC_CM*/ @@ -133,6 +169,7 @@ examples: <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; mediatek,vpu = <&vpu>; + mediatek,vdecsys = <&vdecsys>; power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, <&topckgen CLK_TOP_UNIVPLL_D2>, diff --git a/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-subdev-decoder.yaml b/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-subdev-decoder.yaml index dca9b0c5e106..a500a585c692 100644 --- a/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/sys/contrib/device-tree/Bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -36,7 +36,7 @@ description: | controls the information of each hardware independent which include clk/power/irq. There are two workqueues in parent device: lat workqueue and core workqueue. They are used - to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer, + to lat and core hardware decoder. Lat workqueue need to get input bitstream and lat buffer, then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode done. Core workqueue need to get lat buffer and output buffer, then enable core to decode, writing the result to output buffer, disable hardware when core decode done. These two diff --git a/sys/contrib/device-tree/Bindings/media/nuvoton,npcm-ece.yaml b/sys/contrib/device-tree/Bindings/media/nuvoton,npcm-ece.yaml new file mode 100644 index 000000000000..b47468e54504 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/nuvoton,npcm-ece.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nuvoton,npcm-ece.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Encoding Compression Engine + +maintainers: + - Joseph Liu <kwliu@nuvoton.com> + - Marvin Lin <kflin@nuvoton.com> + +description: | + Video Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs. + +properties: + compatible: + enum: + - nuvoton,npcm750-ece + - nuvoton,npcm845-ece + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + + ece: video-codec@f0820000 { + compatible = "nuvoton,npcm750-ece"; + reg = <0xf0820000 0x2000>; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_ECE>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/nuvoton,npcm-vcd.yaml b/sys/contrib/device-tree/Bindings/media/nuvoton,npcm-vcd.yaml new file mode 100644 index 000000000000..c885f559d2e5 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/nuvoton,npcm-vcd.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nuvoton,npcm-vcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Video Capture/Differentiation Engine + +maintainers: + - Joseph Liu <kwliu@nuvoton.com> + - Marvin Lin <kflin@nuvoton.com> + +description: | + Video Capture/Differentiation Engine (VCD) present on Nuvoton NPCM SoCs. + +properties: + compatible: + enum: + - nuvoton,npcm750-vcd + - nuvoton,npcm845-vcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access GCR (Global Control Register) registers. + + nuvoton,sysgfxi: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access GFXI (Graphics Core Information) registers. + + nuvoton,ece: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access ECE (Encoding Compression Engine) registers. + + memory-region: + maxItems: 1 + description: + CMA pool to use for buffers allocation instead of the default CMA pool. + +required: + - compatible + - reg + - interrupts + - resets + - nuvoton,sysgcr + - nuvoton,sysgfxi + - nuvoton,ece + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + + vcd: vcd@f0810000 { + compatible = "nuvoton,npcm750-vcd"; + reg = <0xf0810000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_VCD>; + nuvoton,sysgcr = <&gcr>; + nuvoton,sysgfxi = <&gfxi>; + nuvoton,ece = <&ece>; + }; diff --git a/sys/contrib/device-tree/Bindings/media/nxp,imx7-csi.yaml b/sys/contrib/device-tree/Bindings/media/nxp,imx7-csi.yaml index 358019e85d90..326284e151f6 100644 --- a/sys/contrib/device-tree/Bindings/media/nxp,imx7-csi.yaml +++ b/sys/contrib/device-tree/Bindings/media/nxp,imx7-csi.yaml @@ -59,7 +59,6 @@ allOf: compatible: contains: enum: - - fsl,imx8mq-csi - fsl,imx8mm-csi then: required: diff --git a/sys/contrib/device-tree/Bindings/media/nxp,imx8-isi.yaml b/sys/contrib/device-tree/Bindings/media/nxp,imx8-isi.yaml index 6038b9b5ab36..e4665469a86c 100644 --- a/sys/contrib/device-tree/Bindings/media/nxp,imx8-isi.yaml +++ b/sys/contrib/device-tree/Bindings/media/nxp,imx8-isi.yaml @@ -21,6 +21,7 @@ properties: enum: - fsl,imx8mn-isi - fsl,imx8mp-isi + - fsl,imx93-isi reg: maxItems: 1 @@ -72,7 +73,9 @@ allOf: properties: compatible: contains: - const: fsl,imx8mn-isi + enum: + - fsl,imx8mn-isi + - fsl,imx93-isi then: properties: interrupts: diff --git a/sys/contrib/device-tree/Bindings/media/qcom,msm8916-venus.yaml b/sys/contrib/device-tree/Bindings/media/qcom,msm8916-venus.yaml index 2350bf4b370e..9410f13ca97c 100644 --- a/sys/contrib/device-tree/Bindings/media/qcom,msm8916-venus.yaml +++ b/sys/contrib/device-tree/Bindings/media/qcom,msm8916-venus.yaml @@ -40,7 +40,7 @@ properties: properties: compatible: - const: "venus-decoder" + const: venus-decoder required: - compatible @@ -52,7 +52,7 @@ properties: properties: compatible: - const: "venus-encoder" + const: venus-encoder required: - compatible diff --git a/sys/contrib/device-tree/Bindings/media/qcom,sdm845-venus-v2.yaml b/sys/contrib/device-tree/Bindings/media/qcom,sdm845-venus-v2.yaml index d5f80976f4cf..6228fd2b3246 100644 --- a/sys/contrib/device-tree/Bindings/media/qcom,sdm845-venus-v2.yaml +++ b/sys/contrib/device-tree/Bindings/media/qcom,sdm845-venus-v2.yaml @@ -48,6 +48,14 @@ properties: iommus: maxItems: 2 + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + operating-points-v2: true opp-table: type: object diff --git a/sys/contrib/device-tree/Bindings/media/qcom,sm8250-venus.yaml b/sys/contrib/device-tree/Bindings/media/qcom,sm8250-venus.yaml index 7915dcd2d99f..f66033ae8b59 100644 --- a/sys/contrib/device-tree/Bindings/media/qcom,sm8250-venus.yaml +++ b/sys/contrib/device-tree/Bindings/media/qcom,sm8250-venus.yaml @@ -106,7 +106,7 @@ examples: #include <dt-bindings/clock/qcom,videocc-sm8250.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> venus: video-codec@aa00000 { compatible = "qcom,sm8250-venus"; @@ -114,7 +114,7 @@ examples: interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&videocc MVS0C_GDSC>, <&videocc MVS0_GDSC>, - <&rpmhpd SM8250_MX>; + <&rpmhpd RPMHPD_MX>; power-domain-names = "venus", "vcodec0", "mx"; clocks = <&gcc GCC_VIDEO_AXI0_CLK>, diff --git a/sys/contrib/device-tree/Bindings/media/renesas,vin.yaml b/sys/contrib/device-tree/Bindings/media/renesas,vin.yaml index 324703bfb1bd..5539d0f8e74d 100644 --- a/sys/contrib/device-tree/Bindings/media/renesas,vin.yaml +++ b/sys/contrib/device-tree/Bindings/media/renesas,vin.yaml @@ -95,7 +95,7 @@ properties: synchronization is selected. default: 1 - field-active-even: true + field-even-active: true bus-width: true @@ -144,7 +144,7 @@ properties: synchronization is selected. default: 1 - field-active-even: true + field-even-active: true bus-width: true diff --git a/sys/contrib/device-tree/Bindings/media/rockchip-isp1.yaml b/sys/contrib/device-tree/Bindings/media/rockchip-isp1.yaml index 0bad7e640148..afcaa427d48b 100644 --- a/sys/contrib/device-tree/Bindings/media/rockchip-isp1.yaml +++ b/sys/contrib/device-tree/Bindings/media/rockchip-isp1.yaml @@ -90,15 +90,16 @@ properties: description: connection point for input on the parallel interface properties: - bus-type: - enum: [5, 6] - endpoint: $ref: video-interfaces.yaml# unevaluatedProperties: false - required: - - bus-type + properties: + bus-type: + enum: [5, 6] + + required: + - bus-type anyOf: - required: @@ -199,6 +200,7 @@ examples: wcam: camera@36 { compatible = "ovti,ov5695"; reg = <0x36>; + clocks = <&cru SCLK_TESTCLKOUT1>; port { wcam_out: endpoint { diff --git a/sys/contrib/device-tree/Bindings/media/rockchip-vpu.yaml b/sys/contrib/device-tree/Bindings/media/rockchip-vpu.yaml index 772ec3283bc6..c57e1f488895 100644 --- a/sys/contrib/device-tree/Bindings/media/rockchip-vpu.yaml +++ b/sys/contrib/device-tree/Bindings/media/rockchip-vpu.yaml @@ -68,6 +68,13 @@ properties: iommus: maxItems: 1 + resets: + items: + - description: AXI reset line + - description: AXI bus interface unit reset line + - description: APB reset line + - description: APB bus interface unit reset line + required: - compatible - reg diff --git a/sys/contrib/device-tree/Bindings/media/samsung,exynos4212-fimc-is.yaml b/sys/contrib/device-tree/Bindings/media/samsung,exynos4212-fimc-is.yaml index 3691cd4962b2..3a5ff3f47060 100644 --- a/sys/contrib/device-tree/Bindings/media/samsung,exynos4212-fimc-is.yaml +++ b/sys/contrib/device-tree/Bindings/media/samsung,exynos4212-fimc-is.yaml @@ -75,13 +75,20 @@ properties: power-domains: maxItems: 1 + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Power Management Unit (PMU) system controller interface, used to + power/start the ISP. + patternProperties: "^pmu@[0-9a-f]+$": type: object additionalProperties: false + deprecated: true description: Node representing the SoC's Power Management Unit (duplicated with the - correct PMU node in the SoC). + correct PMU node in the SoC). Deprecated, use samsung,pmu-syscon. properties: reg: @@ -131,6 +138,7 @@ required: - clock-names - interrupts - ranges + - samsung,pmu-syscon - '#size-cells' additionalProperties: false @@ -179,15 +187,12 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; diff --git a/sys/contrib/device-tree/Bindings/media/samsung,fimc.yaml b/sys/contrib/device-tree/Bindings/media/samsung,fimc.yaml index 79ff6d83a9fd..7808d61f1fa3 100644 --- a/sys/contrib/device-tree/Bindings/media/samsung,fimc.yaml +++ b/sys/contrib/device-tree/Bindings/media/samsung,fimc.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^port@[01]$": $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Camera A and camera B inputs. @@ -117,7 +118,7 @@ examples: #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x18000000>; + ranges = <0x0 0x0 0xba1000>; clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; @@ -132,9 +133,9 @@ examples: pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; - fimc@11800000 { + fimc@0 { compatible = "samsung,exynos4212-fimc"; - reg = <0x11800000 0x1000>; + reg = <0x00000000 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; @@ -151,9 +152,9 @@ examples: /* ... FIMC 1-3 */ - csis@11880000 { + csis@80000 { compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x4000>; + reg = <0x00080000 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; @@ -186,9 +187,9 @@ examples: /* ... CSIS 1 */ - fimc-lite@12390000 { + fimc-lite@b90000 { compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; + reg = <0xb90000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; @@ -198,9 +199,9 @@ examples: /* ... FIMC-LITE 1 */ - fimc-is@12000000 { + fimc-is@800000 { compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; + reg = <0x00800000 0x260000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, @@ -236,18 +237,15 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c-isp@12140000 { + i2c-isp@940000 { compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; + reg = <0x00940000 0x100>; clocks = <&isp_clock CLK_ISP_I2C1_ISP>; clock-names = "i2c_isp"; pinctrl-0 = <&fimc_is_i2c1>; diff --git a/sys/contrib/device-tree/Bindings/media/samsung,s5p-mfc.yaml b/sys/contrib/device-tree/Bindings/media/samsung,s5p-mfc.yaml index 084b44582a43..b46cc780703c 100644 --- a/sys/contrib/device-tree/Bindings/media/samsung,s5p-mfc.yaml +++ b/sys/contrib/device-tree/Bindings/media/samsung,s5p-mfc.yaml @@ -24,6 +24,7 @@ properties: - samsung,mfc-v7 # Exynos5420 - samsung,mfc-v8 # Exynos5800 - samsung,mfc-v10 # Exynos7880 + - tesla,fsd-mfc # Tesla FSD - items: - enum: - samsung,exynos3250-mfc # Exynos3250 @@ -49,7 +50,9 @@ properties: iommu-names: minItems: 1 - maxItems: 2 + items: + - const: left + - const: right power-domains: maxItems: 1 @@ -84,7 +87,7 @@ allOf: - const: sclk_mfc iommus: maxItems: 1 - iommus-names: false + iommu-names: false - if: properties: @@ -102,11 +105,9 @@ allOf: - const: aclk - const: aclk_xiu iommus: - maxItems: 2 - iommus-names: - items: - - const: left - - const: right + minItems: 2 + iommu-names: + minItems: 2 - if: properties: @@ -123,11 +124,9 @@ allOf: - const: mfc - const: sclk_mfc iommus: - maxItems: 2 - iommus-names: - items: - - const: left - - const: right + minItems: 2 + iommu-names: + minItems: 2 - if: properties: @@ -144,11 +143,9 @@ allOf: items: - const: mfc iommus: - maxItems: 2 - iommus-names: - items: - - const: left - - const: right + minItems: 2 + iommu-names: + minItems: 2 - if: properties: @@ -161,9 +158,23 @@ allOf: clocks: minItems: 1 maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - tesla,fsd-mfc + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: mfc iommus: - minItems: 1 maxItems: 2 + iommus-names: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/st,stm32-dcmipp.yaml b/sys/contrib/device-tree/Bindings/media/st,stm32-dcmipp.yaml new file mode 100644 index 000000000000..87731f3ce7bd --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/st,stm32-dcmipp.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor + +maintainers: + - Hugues Fruchet <hugues.fruchet@foss.st.com> + - Alain Volmat <alain.volmat@foss.st.com> + +properties: + compatible: + const: st,stm32mp13-dcmipp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + DCMIPP supports a single port node with parallel bus. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + default: 5 + + bus-width: + enum: [8, 10, 12, 14] + default: 8 + + pclk-sample: true + hsync-active: true + vsync-active: true + + required: + - pclk-sample + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp13-clks.h> + #include <dt-bindings/reset/stm32mp13-resets.h> + dcmipp@5a000000 { + compatible = "st,stm32mp13-dcmipp"; + reg = <0x5a000000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc DCMIPP_R>; + clocks = <&rcc DCMIPP_K>; + + port { + endpoint { + remote-endpoint = <&mipid02_2>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/starfive,jh7110-camss.yaml b/sys/contrib/device-tree/Bindings/media/starfive,jh7110-camss.yaml new file mode 100644 index 000000000000..c66586d90fa2 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/starfive,jh7110-camss.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Starfive SoC CAMSS ISP + +maintainers: + - Jack Zhu <jack.zhu@starfivetech.com> + - Changhuang Liang <changhuang.liang@starfivetech.com> + +description: + The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It + consists of a VIN controller (Video In Controller, a top-level control unit) + and an ISP. + +properties: + compatible: + const: starfive,jh7110-camss + + reg: + maxItems: 2 + + reg-names: + items: + - const: syscon + - const: isp + + clocks: + maxItems: 7 + + clock-names: + items: + - const: apb_func + - const: wrapper_clk_c + - const: dvp_inv + - const: axiwr + - const: mipi_rx0_pxl + - const: ispcore_2x + - const: isp_axi + + resets: + maxItems: 6 + + reset-names: + items: + - const: wrapper_p + - const: wrapper_c + - const: axird + - const: axiwr + - const: isp_top_n + - const: isp_top_axi + + power-domains: + items: + - description: JH7110 ISP Power Domain Switch Controller. + + interrupts: + maxItems: 4 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Input port for receiving DVP data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + bus-width: + enum: [8, 10, 12] + + data-shift: + enum: [0, 2] + default: 0 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + required: + - bus-type + - bus-width + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Input port for receiving CSI data. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - interrupts + - ports + +additionalProperties: false + +examples: + - | + isp@19840000 { + compatible = "starfive,jh7110-camss"; + reg = <0x19840000 0x10000>, + <0x19870000 0x30000>; + reg-names = "syscon", "isp"; + clocks = <&ispcrg 0>, + <&ispcrg 13>, + <&ispcrg 2>, + <&ispcrg 12>, + <&ispcrg 1>, + <&syscrg 51>, + <&syscrg 52>; + clock-names = "apb_func", + "wrapper_clk_c", + "dvp_inv", + "axiwr", + "mipi_rx0_pxl", + "ispcore_2x", + "isp_axi"; + resets = <&ispcrg 0>, + <&ispcrg 1>, + <&ispcrg 10>, + <&ispcrg 11>, + <&syscrg 41>, + <&syscrg 42>; + reset-names = "wrapper_p", + "wrapper_c", + "axird", + "axiwr", + "isp_top_n", + "isp_top_axi"; + power-domains = <&pwrc 5>; + interrupts = <92>, <87>, <88>, <90>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vin_from_sc2235: endpoint { + remote-endpoint = <&sc2235_to_vin>; + bus-type = <5>; + bus-width = <8>; + data-shift = <2>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + vin_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_vin>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/ti,j721e-csi2rx-shim.yaml b/sys/contrib/device-tree/Bindings/media/ti,j721e-csi2rx-shim.yaml new file mode 100644 index 000000000000..f762fdc05e4d --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/ti,j721e-csi2rx-shim.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721E CSI2RX Shim + +description: | + The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that + enables sending captured frames to memory over PSI-L DMA. In the J721E + Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the + CSI_RX_IF section. + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + const: ti,j721e-csi2rx-shim + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx0 + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + ranges: true + + "#address-cells": true + + "#size-cells": true + +patternProperties: + "^csi-bridge@": + type: object + description: CSI2 bridge node. + $ref: cdns,csi2rx.yaml# + +required: + - compatible + - reg + - dmas + - dma-names + - power-domains + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_udmap 0x4940>; + dma-names = "rx0"; + reg = <0x4500000 0x1000>; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cdns_csi2rx: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x4504000 0x1000>; + clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>, + <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + + reg = <0>; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/video-interfaces.yaml b/sys/contrib/device-tree/Bindings/media/video-interfaces.yaml index a211d49dc2ac..26e3e7d7c67b 100644 --- a/sys/contrib/device-tree/Bindings/media/video-interfaces.yaml +++ b/sys/contrib/device-tree/Bindings/media/video-interfaces.yaml @@ -160,6 +160,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 8 + uniqueItems: true items: # Assume up to 9 physical lane indices maximum: 8 |