diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/soc')
40 files changed, 1116 insertions, 139 deletions
diff --git a/sys/contrib/device-tree/Bindings/soc/altera/altr,sys-mgr.yaml b/sys/contrib/device-tree/Bindings/soc/altera/altr,sys-mgr.yaml new file mode 100644 index 000000000000..d56ff4c05ae5 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/altera/altr,sys-mgr.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/altera/altr,sys-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA System Manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + oneOf: + - description: Cyclone5/Arria5/Arria10 + const: altr,sys-mgr + - description: Stratix10 SoC + items: + - const: altr,sys-mgr-s10 + - const: altr,sys-mgr + + reg: + maxItems: 1 + + cpu1-start-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU1 start address in hex + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: altr,sys-mgr-s10 + then: + properties: + cpu1-start-addr: false + +additionalProperties: false + +examples: + - | + sysmgr@ffd08000 { + compatible = "altr,sys-mgr"; + reg = <0xffd08000 0x1000>; + cpu1-start-addr = <0xffd080c4>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml index 77c281153010..39d4637c2d08 100644 --- a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml +++ b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml @@ -22,6 +22,8 @@ properties: - amlogic,meson-axg-clk-measure - amlogic,meson-g12a-clk-measure - amlogic,meson-sm1-clk-measure + - amlogic,c3-clk-measure + - amlogic,s4-clk-measure reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml index c6bce40946d4..f3a85c67ce8a 100644 --- a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml +++ b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - amlogic,meson-hhi-sysctrl - amlogic,meson-gx-hhi-sysctrl - amlogic,meson-gx-ao-sysctrl - amlogic,meson-axg-hhi-sysctrl @@ -40,6 +41,19 @@ allOf: properties: compatible: enum: + - amlogic,meson-hhi-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,meson8-clkc.yaml# + + pinctrl: false + phy: false + + - if: + properties: + compatible: + enum: - amlogic,meson-gx-hhi-sysctrl - amlogic,meson-axg-hhi-sysctrl then: @@ -172,22 +186,22 @@ examples: }; power-controller { - compatible = "amlogic,meson-axg-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&sysctrl_AO>; - - resets = <&reset_viu>, - <&reset_venc>, - <&reset_vcbus>, - <&reset_vencl>, - <&reset_vid_lock>; - reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock"; - clocks = <&clk_vpu>, <&clk_vapb>; - clock-names = "vpu", "vapb"; + compatible = "amlogic,meson-axg-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; }; phy { - compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <0>; + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + #phy-cells = <0>; }; }; diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,imx23-digctl.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,imx23-digctl.yaml new file mode 100644 index 000000000000..3de135a70579 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,imx23-digctl.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,imx23-digctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale mxs digctrl for i.MX23/i.MX28 + +description: | + The digital control block provides overall control of various items within + the top digital block of the chip, including: + - Default first-level page table (DFLPT) controls + - HCLK performance counter + - Free-running microseconds counter + - Entropy control + - BIST controls for ARM Core and On-Chip RAM + - Chip Revision register + - USB loop back congtrol + - Other miscellaneous controls + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx28-digctl + - const: fsl,imx23-digctl + - const: fsl,imx23-digctl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + digctl@8001c000 { + compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; + reg = <0x8001c000 0x2000>; + interrupts = <89>; + }; + diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,ls1028a-reset.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,ls1028a-reset.yaml index 31295be91013..b43df10c5ef4 100644 --- a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,ls1028a-reset.yaml +++ b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,ls1028a-reset.yaml @@ -1,13 +1,13 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas//soc/fsl/fsl,ls1028a-reset.yaml# +$id: http://devicetree.org/schemas/soc/fsl/fsl,ls1028a-reset.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Layerscape Reset Registers Module maintainers: - - Frank Li + - Frank Li <Frank.Li@nxp.com> description: Reset Module includes chip reset, service processor control and Reset Control diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-fqd.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-fqd.yaml index de0b4ae740ff..a975bce59975 100644 --- a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-fqd.yaml +++ b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-fqd.yaml @@ -50,7 +50,7 @@ required: - compatible allOf: - - $ref: reserved-memory.yaml + - $ref: /schemas/reserved-memory/reserved-memory.yaml unevaluatedProperties: false @@ -61,7 +61,7 @@ examples: #size-cells = <2>; qman-fqd { - compatible = "shared-dma-pool"; + compatible = "fsl,qman-fqd"; size = <0 0x400000>; alignment = <0 0x400000>; no-map; diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-portal.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-portal.yaml index 17016184143f..e459fec02ba8 100644 --- a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-portal.yaml +++ b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,qman-portal.yaml @@ -35,6 +35,7 @@ properties: fsl,liodn: $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN (FLIODN) @@ -69,6 +70,7 @@ patternProperties: type: object properties: fsl,liodn: + $ref: /schemas/types.yaml#/definitions/uint32-array description: See pamu.txt, PAMU property used for static LIODN assignment fsl,iommu-parent: diff --git a/sys/contrib/device-tree/Bindings/soc/google/google,gs101-pmu-intr-gen.yaml b/sys/contrib/device-tree/Bindings/soc/google/google,gs101-pmu-intr-gen.yaml new file mode 100644 index 000000000000..2be022ca6a7d --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/google/google,gs101-pmu-intr-gen.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/google/google,gs101-pmu-intr-gen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Power Management Unit (PMU) Interrupt Generation + +description: | + PMU interrupt generator for handshaking between PMU through interrupts. + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +properties: + compatible: + items: + - const: google,gs101-pmu-intr-gen + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pmu_intr_gen: syscon@17470000 { + compatible = "google,gs101-pmu-intr-gen", "syscon"; + reg = <0x17470000 0x10000>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,aips-bus.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,aips-bus.yaml index 80d99861fec5..70a4af650110 100644 --- a/sys/contrib/device-tree/Bindings/soc/imx/fsl,aips-bus.yaml +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,aips-bus.yaml @@ -22,6 +22,9 @@ select: required: - compatible +allOf: + - $ref: /schemas/simple-bus.yaml# + properties: compatible: items: @@ -35,7 +38,7 @@ required: - compatible - reg -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-anatop.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-anatop.yaml index c4ae4f28422b..f40c157908aa 100644 --- a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-anatop.yaml +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-anatop.yaml @@ -36,6 +36,7 @@ properties: - description: Temperature sensor event - description: Brown-out event on either of the support regulators - description: Brown-out event on either the core, gpu or soc regulators + minItems: 2 tempmon: type: object @@ -43,7 +44,7 @@ properties: $ref: /schemas/thermal/imx-thermal.yaml patternProperties: - "regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$": + "regulator-((1p1)|(2p5)|(3p0)|(vdd1p0d)|(vdd1p2)|(vddcore)|(vddpcie)|(vddpu)|(vddsoc))$": type: object unevaluatedProperties: false $ref: /schemas/regulator/anatop-regulator.yaml @@ -52,6 +53,23 @@ required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx7d-anatop + then: + properties: + interrupts: + maxItems: 2 + else: + properties: + interrupts: + minItems: 3 + maxItems: 3 + additionalProperties: false examples: diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml new file mode 100644 index 000000000000..4c96d4917967 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt8183-dvfsrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) + +description: + The Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) is a + Hardware module used to collect all the requests from both software and the + various remote processors embedded into the SoC and decide about a minimum + operating voltage and a minimum DRAM frequency to fulfill those requests in + an effort to provide the best achievable performance per watt. + This hardware IP is capable of transparently performing direct register R/W + on all of the DVFSRC-controlled regulators and SoC bandwidth knobs. + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Henry Chen <henryc.chen@mediatek.com> + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6893-dvfsrc + - mediatek,mt8183-dvfsrc + - mediatek,mt8195-dvfsrc + - items: + - const: mediatek,mt8192-dvfsrc + - const: mediatek,mt8195-dvfsrc + + reg: + maxItems: 1 + description: DVFSRC common register address and length. + + regulators: + type: object + $ref: /schemas/regulator/mediatek,mt6873-dvfsrc-regulator.yaml# + + interconnect: + type: object + $ref: /schemas/interconnect/mediatek,mt8183-emi.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + system-controller@10012000 { + compatible = "mediatek,mt8195-dvfsrc"; + reg = <0 0x10012000 0 0x1000>; + + regulators { + compatible = "mediatek,mt8195-dvfsrc-regulator"; + + dvfsrc_vcore: dvfsrc-vcore { + regulator-name = "dvfsrc-vcore"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + }; + + dvfsrc_vscp: dvfsrc-vscp { + regulator-name = "dvfsrc-vscp"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + }; + }; + + emi_icc: interconnect { + compatible = "mediatek,mt8195-emi"; + #interconnect-cells = <1>; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/scpsys.txt b/sys/contrib/device-tree/Bindings/soc/mediatek/scpsys.txt index 2bc367793aec..3530a6668b48 100644 --- a/sys/contrib/device-tree/Bindings/soc/mediatek/scpsys.txt +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/scpsys.txt @@ -20,6 +20,7 @@ Required properties: - compatible: Should be one of: - "mediatek,mt2701-scpsys" - "mediatek,mt2712-scpsys" + - "mediatek,mt6735-scpsys" - "mediatek,mt6765-scpsys" - "mediatek,mt6797-scpsys" - "mediatek,mt7622-scpsys" diff --git a/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index a46411149571..2c7275c4503b 100644 --- a/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -15,13 +15,19 @@ description: | properties: compatible: - items: - - enum: - - atmel,at91rm9200-tcb - - atmel,at91sam9x5-tcb - - atmel,sama5d2-tcb - - const: simple-mfd - - const: syscon + oneOf: + - items: + - enum: + - atmel,at91rm9200-tcb + - atmel,at91sam9x5-tcb + - atmel,sama5d2-tcb + - const: simple-mfd + - const: syscon + - items: + - const: microchip,sam9x7-tcb + - const: atmel,sama5d2-tcb + - const: simple-mfd + - const: syscon reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml b/sys/contrib/device-tree/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml index f7e606d45ebc..6d11472ba5a7 100644 --- a/sys/contrib/device-tree/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml +++ b/sys/contrib/device-tree/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml @@ -41,9 +41,7 @@ properties: enum: [ 1, 2 ] '#clock-cells': - description: - Cell is clock index. Optional if compatible has a single clock. - enum: [ 0, 1 ] + const: 1 clocks: maxItems: 1 @@ -312,26 +310,6 @@ allOf: properties: '#reset-cells': false - # Compatibles exposing a single clock. - - if: - properties: - compatible: - contains: - enum: - - mobileye,eyeq6h-central-olb - - mobileye,eyeq6h-east-olb - - mobileye,eyeq6h-west-olb - - mobileye,eyeq6h-ddr0-olb - - mobileye,eyeq6h-ddr1-olb - then: - properties: - '#clock-cells': - const: 0 - else: - properties: - '#clock-cells': - const: 1 - # Only EyeQ5 has pinctrl in OLB. - if: not: diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml index 7afdb60edb22..851a1260f8dc 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -25,8 +25,13 @@ properties: compatible: items: - enum: + - qcom,milos-aoss-qmp + - qcom,qcs615-aoss-qmp + - qcom,qcs8300-aoss-qmp - qcom,qdu1000-aoss-qmp + - qcom,sa8255p-aoss-qmp - qcom,sa8775p-aoss-qmp + - qcom,sar2130p-aoss-qmp - qcom,sc7180-aoss-qmp - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp @@ -34,12 +39,14 @@ properties: - qcom,sdx75-aoss-qmp - qcom,sdm845-aoss-qmp - qcom,sm6350-aoss-qmp + - qcom,sm7150-aoss-qmp - qcom,sm8150-aoss-qmp - qcom,sm8250-aoss-qmp - qcom,sm8350-aoss-qmp - qcom,sm8450-aoss-qmp - qcom,sm8550-aoss-qmp - qcom,sm8650-aoss-qmp + - qcom,sm8750-aoss-qmp - qcom,x1e80100-aoss-qmp - const: qcom,aoss-qmp diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml index ce7e20dd22c9..fdc6fc17ed71 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml @@ -18,6 +18,7 @@ properties: compatible: items: - enum: + - qcom,sm7150-dcc - qcom,sm8150-dcc - qcom,sc7280-dcc - qcom,sc7180-dcc diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml index f2c5ec7e6437..84218636c0d8 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml @@ -55,25 +55,25 @@ additionalProperties: false examples: - | eud@88e0000 { - compatible = "qcom,sc7280-eud", "qcom,eud"; - reg = <0x88e0000 0x2000>, - <0x88e2000 0x1000>; + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0x88e0000 0x2000>, + <0x88e2000 0x1000>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - eud_ep: endpoint { - remote-endpoint = <&usb2_role_switch>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; - port@1 { - reg = <1>; - eud_con: endpoint { - remote-endpoint = <&con_eud>; - }; - }; - }; + port@1 { + reg = <1>; + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml index 7b031ef09669..54cd585f19e3 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml @@ -54,6 +54,10 @@ properties: dma-coherent: true + firmware-name: + maxItems: 1 + description: Specify the name of the QUP firmware to load. + required: - compatible - reg @@ -135,6 +139,7 @@ examples: #address-cells = <2>; #size-cells = <2>; ranges; + firmware-name = "qcom/sa8775p/qupv3fw.elf"; i2c0: i2c@a94000 { compatible = "qcom,geni-i2c"; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml index 2d3fe0b54243..48114bb0c927 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml @@ -37,7 +37,9 @@ properties: - const: qcom,pmic-glink - items: - enum: + - qcom,milos-pmic-glink - qcom,sm8650-pmic-glink + - qcom,sm8750-pmic-glink - qcom,x1e80100-pmic-glink - const: qcom,sm8550-pmic-glink - const: qcom,pmic-glink diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml index b00be9e01206..3e8d99cb4dc3 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml @@ -36,6 +36,13 @@ properties: - const: err - const: wakeup + clocks: + maxItems: 1 + + clock-names: + items: + - const: ram + qcom,ipc: $ref: /schemas/types.yaml#/definitions/phandle-array items: @@ -46,6 +53,14 @@ properties: description: Three entries specifying the outgoing ipc bit used for signaling the RPM. + clock-controller: + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,rpmcc + patternProperties: "^regulators(-[01])?$": type: object diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml index af632d0e0355..036562eb5140 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -44,7 +44,13 @@ description: | properties: compatible: - const: qcom,rpmh-rsc + oneOf: + - items: + - enum: + - qcom,sc7180-rpmh-apps-rsc + - qcom,sdm845-rpmh-apps-rsc + - const: qcom,rpmh-rsc + - const: qcom,rpmh-rsc interrupts: minItems: 1 @@ -124,7 +130,21 @@ required: - qcom,tcs-offset - reg - reg-names - - power-domains + +allOf: + # Some platforms may lack a OSI-mode PSCI implementation, which implies the + # system power domain can't provide feedback about entering power collapse + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,sc7180-rpmh-apps-rsc + - qcom,sdm845-rpmh-apps-rsc + then: + required: + - power-domains additionalProperties: false diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml new file mode 100644 index 000000000000..352af3426d34 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,sa8255p-geni-se-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Praveen Talari <quic_ptalari@quicinc.com> + +description: + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide up to 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + const: qcom,sa8255p-geni-se-qup + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + iommus: + maxItems: 1 + + dma-coherent: true + +patternProperties: + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + additionalProperties: true + + properties: + compatible: + const: qcom,sa8255p-geni-spi + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + additionalProperties: true + + properties: + compatible: + const: qcom,sa8255p-geni-i2c + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + additionalProperties: true + + properties: + compatible: + enum: + - qcom,sa8255p-geni-uart + - qcom,sa8255p-geni-debug-uart + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@9c0000 { + compatible = "qcom,sa8255p-geni-se-qup"; + reg = <0 0x9c0000 0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial@990000 { + compatible = "qcom,sa8255p-geni-uart"; + reg = <0 0x990000 0 0x4000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>; + power-domain-names = "power", "perf"; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,saw2.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,saw2.yaml index ca4bce817273..c2f1f5946cfa 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,saw2.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,saw2.yaml @@ -73,9 +73,10 @@ examples: #size-cells = <0>; cpu@0 { - compatible = "qcom,kryo"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "qcom,kpss-acc-v2"; + qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; operating-points-v2 = <&cpu_opp_table>; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml index 141d666dc3f7..1ba1d419e83b 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml @@ -55,8 +55,7 @@ properties: qcom,smem: $ref: /schemas/types.yaml#/definitions/uint32-array - items: - maxItems: 2 + maxItems: 2 description: Two identifiers of the inbound and outbound smem items used for this edge. diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml index fd6db0ca98eb..4fcae6bedfff 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml @@ -54,7 +54,7 @@ properties: - compatible wifi: - additionalProperties: false + unevaluatedProperties: false type: object properties: compatible: @@ -88,6 +88,9 @@ properties: - qcom,smem-states - qcom,smem-state-names + allOf: + - $ref: /schemas/net/wireless/wireless-controller.yaml# + required: - compatible - qcom,mmio diff --git a/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml index ebbf0c9109ce..c41dcaea568a 100644 --- a/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml +++ b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml @@ -22,7 +22,11 @@ description: | properties: compatible: - const: renesas,r9a09g057-sys + items: + - enum: + - renesas,r9a09g047-sys # RZ/G3E + - renesas,r9a09g056-sys # RZ/V2N + - renesas,r9a09g057-sys # RZ/V2H reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml b/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml index b7acb65bdecd..5f9d541d177a 100644 --- a/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml +++ b/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml @@ -360,17 +360,26 @@ properties: - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) - const: renesas,r8a779g0 - - description: R-Car V4H (R8A779G2) + - items: + - enum: + - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) + - const: renesas,white-hawk-cpu + - const: renesas,r8a779g0 + + - description: R-Car V4H (R8A779G[23]) items: - enum: - - renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001) - - const: renesas,r8a779g2 + - renesas,white-hawk-single # White Hawk Single board (RTP8A779G[23]ASKB0F10SA001) + - enum: + - renesas,r8a779g2 # ES2.x + - renesas,r8a779g3 # ES3.x - const: renesas,r8a779g0 - - items: + - description: R-Car V4H (R8A779G3) + items: - enum: - - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) - - const: renesas,white-hawk-cpu + - retronix,sparrow-hawk # Sparrow Hawk board + - const: renesas,r8a779g3 # ES3.x - const: renesas,r8a779g0 - description: R-Car V4M (R8A779H0) @@ -379,6 +388,13 @@ properties: - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S) - const: renesas,r8a779h0 + - description: R-Car V4M-7 (R8A779H2) + items: + - enum: + - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H2ASKB0F10SA001) + - const: renesas,r8a779h2 # ES2.x + - const: renesas,r8a779h0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -491,6 +507,13 @@ properties: - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L - const: renesas,r9a07g044 + - items: + - enum: + # MYIR Remi Pi SBC (MYB-YG2LX-REMI) + - myir,remi-pi + - const: renesas,r9a07g044l2 + - const: renesas,r9a07g044 + - description: RZ/V2L (R9A07G054) items: - enum: @@ -525,16 +548,77 @@ properties: - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - const: renesas,r9a09g011 + - description: RZ/G3E (R9A09G047) + items: + - enum: + - renesas,smarc2-evk # RZ SMARC Carrier-II EVK + - enum: + - renesas,rzg3e-smarcm # RZ/G3E SMARC Module (SoM) + - enum: + - renesas,r9a09g047e27 # Dual Cortex-A55 + Cortex-M33 (15mm BGA) + - renesas,r9a09g047e28 # Dual Cortex-A55 + Cortex-M33 (21mm BGA) + - renesas,r9a09g047e37 # Dual Cortex-A55 + Cortex-M33 + Ethos-U55 (15mm BGA) + - renesas,r9a09g047e38 # Dual Cortex-A55 + Cortex-M33 + Ethos-U55 (21mm BGA) + - renesas,r9a09g047e47 # Quad Cortex-A55 + Cortex-M33 (15mm BGA) + - renesas,r9a09g047e48 # Quad Cortex-A55 + Cortex-M33 (21mm BGA) + - renesas,r9a09g047e57 # Quad Cortex-A55 + Cortex-M33 + Ethos-U55 (15mm BGA) + - renesas,r9a09g047e58 # Quad Cortex-A55 + Cortex-M33 + Ethos-U55 (21mm BGA) + - const: renesas,r9a09g047 + + - description: RZ/V2N (R9A09G056) + items: + - enum: + - renesas,rzv2n-evk # RZ/V2N EVK (RTK0EF0186C03000BJ) + - enum: + - renesas,r9a09g056n41 # RZ/V2N + - renesas,r9a09g056n42 # RZ/V2N with Mali-G31 support + - renesas,r9a09g056n43 # RZ/V2N with Mali-C55 support + - renesas,r9a09g056n44 # RZ/V2N with Mali-G31 + Mali-C55 support + - renesas,r9a09g056n45 # RZ/V2N with cryptographic extension support + - renesas,r9a09g056n46 # RZ/V2N with Mali-G31 + cryptographic extension support + - renesas,r9a09g056n47 # RZ/V2N with Mali-C55 + cryptographic extension support + - renesas,r9a09g056n48 # RZ/V2N with Mali-G31 + Mali-C55 + cryptographic extension support + - const: renesas,r9a09g056 + - description: RZ/V2H(P) (R9A09G057) items: - enum: - - renesas,rzv2h-evk # RZ/V2H EVK + - renesas,rzv2h-evk # RZ/V2H EVK (RTK0EF0168C06001BJ) - enum: - renesas,r9a09g057h41 # RZ/V2H - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support + - renesas,r9a09g057h45 # RZ/V2H with cryptographic extension support + - renesas,r9a09g057h46 # RZ/V2H with Mali-G31 + cryptographic extension support + - renesas,r9a09g057h48 # RZ/V2HP with Mali-G31 + Mali-C55 + cryptographic extension support - const: renesas,r9a09g057 + - description: Yuridenki-Shokai RZ/V2H Kakip + items: + - const: yuridenki,kakip + - const: renesas,r9a09g057h48 + - const: renesas,r9a09g057 + + - description: RZ/T2H (R9A09G077) + items: + - enum: + - renesas,rzt2h-evk # RZ/T2H Evaluation Board (RTK9RZT2H0S00000BJ) + - enum: + - renesas,r9a09g077m04 # RZ/T2H with Single Cortex-A55 + Dual Cortex-R52 - no security + - renesas,r9a09g077m24 # RZ/T2H with Dual Cortex-A55 + Dual Cortex-R52 - no security + - renesas,r9a09g077m44 # RZ/T2H with Quad Cortex-A55 + Dual Cortex-R52 - no security + - const: renesas,r9a09g077 + + - description: RZ/N2H (R9A09G087) + items: + - enum: + - renesas,rzn2h-evk # RZ/N2H Evaluation Board (RTK9RZN2H0S00000BJ) + - enum: + - renesas,r9a09g087m04 # RZ/N2H with Single Cortex-A55 + Dual Cortex-R52 - no security + - renesas,r9a09g087m24 # RZ/N2H with Dual Cortex-A55 + Dual Cortex-R52 - no security + - renesas,r9a09g087m44 # RZ/N2H with Quad Cortex-A55 + Dual Cortex-R52 - no security + - const: renesas,r9a09g087 + additionalProperties: true ... diff --git a/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml b/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml index 50d727f4b76c..1ab0b092e2a5 100644 --- a/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml +++ b/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml @@ -15,6 +15,15 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3528-ioc-grf + - rockchip,rk3528-vo-grf + - rockchip,rk3528-vpu-grf + - rockchip,rk3562-ioc-grf + - rockchip,rk3562-peri-grf + - rockchip,rk3562-pipephy-grf + - rockchip,rk3562-pmu-grf + - rockchip,rk3562-sys-grf + - rockchip,rk3562-usbphy-grf - rockchip,rk3566-pipe-grf - rockchip,rk3568-pcie3-phy-grf - rockchip,rk3568-pipe-grf @@ -23,6 +32,7 @@ properties: - rockchip,rk3576-bigcore-grf - rockchip,rk3576-cci-grf - rockchip,rk3576-gpu-grf + - rockchip,rk3576-hdptxphy-grf - rockchip,rk3576-litcore-grf - rockchip,rk3576-npu-grf - rockchip,rk3576-php-grf @@ -33,9 +43,11 @@ properties: - rockchip,rk3576-usb-grf - rockchip,rk3576-usbdpphy-grf - rockchip,rk3576-vo0-grf + - rockchip,rk3576-vo1-grf - rockchip,rk3576-vop-grf - rockchip,rk3588-bigcore0-grf - rockchip,rk3588-bigcore1-grf + - rockchip,rk3588-dcphy-grf - rockchip,rk3588-hdptxphy-grf - rockchip,rk3588-ioc - rockchip,rk3588-php-grf @@ -76,10 +88,12 @@ properties: - rockchip,rk3368-pmugrf - rockchip,rk3399-grf - rockchip,rk3399-pmugrf + - rockchip,rk3562-pmu-grf - rockchip,rk3568-grf - rockchip,rk3568-pmugrf - rockchip,rk3576-ioc-grf - rockchip,rk3576-pmu0-grf + - rockchip,rk3576-usb2phy-grf - rockchip,rk3588-usb2phy-grf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf @@ -165,10 +179,12 @@ allOf: properties: gpio: type: object + properties: + compatible: + contains: + const: rockchip,rk3328-grf-gpio - $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# - - unevaluatedProperties: false + additionalProperties: true power-controller: type: object @@ -194,8 +210,8 @@ allOf: pcie-phy: type: object - description: - Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt + $ref: /schemas/phy/rockchip,rk3399-pcie-phy.yaml# + unevaluatedProperties: false patternProperties: "^phy@[0-9a-f]+$": @@ -233,6 +249,7 @@ allOf: - rockchip,rk3308-usb2phy-grf - rockchip,rk3328-usb2phy-grf - rockchip,rk3399-grf + - rockchip,rk3576-usb2phy-grf - rockchip,rk3588-usb2phy-grf - rockchip,rv1108-grf @@ -283,6 +300,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3576-vo1-grf - rockchip,rk3588-vo-grf - rockchip,rk3588-vo0-grf - rockchip,rk3588-vo1-grf @@ -317,6 +335,15 @@ examples: #phy-cells = <0>; }; + pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + #phy-cells = <1>; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; + }; + phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; reg = <0xf780 0x20>; diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml index 15fcd8f1d8bc..f0fb24156da9 100644 --- a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml +++ b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml @@ -52,7 +52,12 @@ properties: - const: syscon - items: - enum: + - samsung,exynos2200-pmu + - samsung,exynos7870-pmu - samsung,exynos7885-pmu + - samsung,exynos8895-pmu + - samsung,exynos9810-pmu + - samsung,exynos990-pmu - samsung,exynosautov9-pmu - samsung,exynosautov920-pmu - tesla,fsd-pmu @@ -124,6 +129,11 @@ properties: description: Node for reboot method + google,pmu-intr-gen-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU interrupt generation interface. + required: - compatible - reg @@ -184,6 +194,19 @@ allOf: properties: dp-phy: false + - if: + properties: + compatible: + contains: + enum: + - google,gs101-pmu + then: + required: + - google,pmu-intr-gen-syscon + else: + properties: + google,pmu-intr-gen-syscon: false + examples: - | #include <dt-bindings/clock/exynos5250.h> diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml index f80fcbc3128b..cb22637091e8 100644 --- a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml +++ b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml @@ -11,11 +11,21 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> description: | - USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). - USI shares almost all internal circuits within each protocol, so only one - protocol can be chosen at a time. USI is modeled as a node with zero or more - child nodes, each representing a serial sub-node device. The mode setting - selects which particular function will be used. + The USI IP-core provides configurable support for serial protocols, enabling + different serial communication modes depending on the version. + + In USIv1, configurations are available to enable either one or two protocols + simultaneously in select combinations - High-Speed I2C0, High-Speed + I2C1, SPI, UART, High-Speed I2C0 and I2C1 or both High-Speed + I2C1 and UART. + + In USIv2, only one protocol can be active at a time, either UART, SPI, or + High-Speed I2C. + + The USI core shares internal circuits across protocols, meaning only the + selected configuration is active at any given time. USI is modeled as a node + with zero or more child nodes, each representing a serial sub-node device. The + mode setting selects which particular function will be used. properties: $nodename: @@ -31,6 +41,7 @@ properties: - const: samsung,exynos850-usi - enum: - samsung,exynos850-usi + - samsung,exynos8895-usi reg: maxItems: 1 @@ -64,6 +75,7 @@ properties: samsung,mode: $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6] description: Selects USI function (which serial protocol to use). Refer to <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values. @@ -100,37 +112,59 @@ required: - samsung,sysreg - samsung,mode -if: - properties: - compatible: - contains: - enum: - - samsung,exynos850-usi +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-usi + + then: + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI/I2C protocol -then: - properties: - reg: - maxItems: 1 + clock-names: + maxItems: 2 - clocks: - items: - - description: Bus (APB) clock - - description: Operating clock for UART/SPI/I2C protocol + samsung,mode: + enum: [0, 1, 2, 3] - clock-names: - maxItems: 2 + required: + - reg + - clocks + - clock-names - required: - - reg - - clocks - - clock-names + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos8895-usi -else: - properties: - reg: false - clocks: false - clock-names: false - samsung,clkreq-on: false + then: + properties: + reg: false + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI protocol + + clock-names: + maxItems: 2 + + samsung,clkreq-on: false + + required: + - clocks + - clock-names additionalProperties: false @@ -143,7 +177,7 @@ examples: compatible = "samsung,exynos850-usi"; reg = <0x138200c0 0x20>; samsung,sysreg = <&sysreg_peri 0x1010>; - samsung,mode = <USI_V2_UART>; + samsung,mode = <USI_MODE_UART>; samsung,clkreq-on; /* needed for UART mode */ #address-cells = <1>; #size-cells = <1>; @@ -157,7 +191,6 @@ examples: interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peri 32>, <&cmu_peri 31>; clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; }; hsi2c_0: i2c@13820000 { diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml index 3ca220582897..d8b302f97547 100644 --- a/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -18,9 +18,19 @@ properties: - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg + - samsung,exynos2200-cmgp-sysreg + - samsung,exynos2200-peric0-sysreg + - samsung,exynos2200-peric1-sysreg + - samsung,exynos2200-peric2-sysreg + - samsung,exynos2200-ufs-sysreg - samsung,exynos3-sysreg - samsung,exynos4-sysreg - samsung,exynos5-sysreg + - samsung,exynos8895-fsys0-sysreg + - samsung,exynos8895-fsys1-sysreg + - samsung,exynos8895-peric0-sysreg + - samsung,exynos8895-peric1-sysreg + - samsung,exynosautov920-hsi2-sysreg - samsung,exynosautov920-peric0-sysreg - samsung,exynosautov920-peric1-sysreg - tesla,fsd-cam-sysreg @@ -79,6 +89,10 @@ allOf: - samsung,exynos850-cmgp-sysreg - samsung,exynos850-peri-sysreg - samsung,exynos850-sysreg + - samsung,exynos8895-fsys0-sysreg + - samsung,exynos8895-fsys1-sysreg + - samsung,exynos8895-peric0-sysreg + - samsung,exynos8895-peric1-sysreg then: required: - clocks diff --git a/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml b/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml new file mode 100644 index 000000000000..5cf186c396c9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sophgo/sophgo,cv1800b-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Real Time Clock of the Sophgo CV1800 SoC + +description: + The RTC (Real Time Clock) is an independently powered module in the chip. It + contains a 32KHz oscillator and a Power-On-Reset (POR) sub-module, which can + be used for time display and scheduled alarm produce. In addition, the + hardware state machine provides triggering and timing control for chip + power-on, power-off and reset. + + Furthermore, the 8051 subsystem is located within RTCSYS and is independently + powered. System software can use the 8051 to manage wake conditions and wake + the system while the system is asleep, and communicate with external devices + through peripheral controllers. + + Technical Reference Manual available at + https://github.com/sophgo/sophgo-doc/tree/main/SG200X/TRM + +maintainers: + - sophgo@lists.linux.dev + +allOf: + - $ref: /schemas/rtc/rtc.yaml# + +properties: + compatible: + items: + - const: sophgo,cv1800b-rtc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + items: + - description: RTC Alarm + - description: RTC Longpress + - description: VBAT DET + + interrupt-names: + items: + - const: alarm + - const: longpress + - const: vbat + + clocks: + items: + - description: RTC clock source + - description: DW8051 MCU clock source + + clock-names: + items: + - const: rtc + - const: mcu + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/sophgo,cv1800.h> + #include <dt-bindings/interrupt-controller/irq.h> + + rtc@5025000 { + compatible = "sophgo,cv1800b-rtc", "syscon"; + reg = <0x5025000 0x2000>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>, + <18 IRQ_TYPE_LEVEL_HIGH>, + <19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "alarm", "longpress", "vbat"; + clocks = <&clk CLK_RTC_25M>, + <&clk CLK_SRC_RTC_SYS_0>; + clock-names = "rtc", "mcu"; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml b/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml new file mode 100644 index 000000000000..a82cc3cae576 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2044-top-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2044 SoC TOP system controller + +maintainers: + - Inochi Amaoto <inochiama@gmail.com> + +description: + The Sophgo SG2044 TOP system controller is a hardware block grouping + multiple small functions, such as clocks and some other internal + function. + +properties: + compatible: + items: + - const: sophgo,sg2044-top-syscon + - const: syscon + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/sophgo,sg2044-pll.h> for valid clock. + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + syscon@50000000 { + compatible = "sophgo,sg2044-top-syscon", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + clocks = <&osc>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo.yaml b/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo.yaml new file mode 100644 index 000000000000..1c502618de51 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/sophgo/sophgo.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sophgo/sophgo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SoC-based boards + +maintainers: + - Chao Wei <chao.wei@sophgo.com> + - Chen Wang <unicorn_wang@outlook.com> + +description: + Sophgo SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - milkv,duo + - const: sophgo,cv1800b + - items: + - enum: + - sophgo,huashan-pi + - const: sophgo,cv1812h + - items: + - enum: + - milkv,duo-module-01-evb + - const: milkv,duo-module-01 + - const: sophgo,sg2000 + - items: + - enum: + - sipeed,licheerv-nano-b + - const: sipeed,licheerv-nano + - const: sophgo,sg2002 + - items: + - enum: + - milkv,pioneer + - sophgo,sg2042-evb-v1 + - sophgo,sg2042-evb-v2 + - const: sophgo,sg2042 + - items: + - enum: + - sophgo,srd3-10 + - const: sophgo,sg2044 + +additionalProperties: true + +... diff --git a/sys/contrib/device-tree/Bindings/soc/spacemit/spacemit,k1-syscon.yaml b/sys/contrib/device-tree/Bindings/soc/spacemit/spacemit,k1-syscon.yaml new file mode 100644 index 000000000000..133a391ee68c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/spacemit/spacemit,k1-syscon.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/spacemit/spacemit,k1-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT K1 SoC System Controller + +maintainers: + - Haylen Chu <heylenay@4d2.org> + +description: + System controllers found on SpacemiT K1 SoC, which are capable of + clock, reset and power-management functions. + +properties: + compatible: + enum: + - spacemit,k1-syscon-apbc + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu + - spacemit,k1-syscon-rcpu + - spacemit,k1-syscon-rcpu2 + - spacemit,k1-syscon-apbc2 + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: osc + - const: vctcxo_1m + - const: vctcxo_3m + - const: vctcxo_24m + + "#clock-cells": + const: 1 + description: + See <dt-bindings/clock/spacemit,k1-syscon.h> for valid indices. + + "#power-domain-cells": + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +allOf: + - if: + properties: + compatible: + contains: + enum: + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu + then: + required: + - "#power-domain-cells" + else: + properties: + "#power-domain-cells": false + - if: + properties: + compatible: + contains: + enum: + - spacemit,k1-syscon-apbc + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu + then: + required: + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + system-controller@d4050000 { + compatible = "spacemit,k1-syscon-mpmu"; + reg = <0xd4050000 0x209c>; + clocks = <&osc>, <&vctcxo_1m>, <&vctcxo_3m>, <&vctcxo_24m>; + clock-names = "osc", "vctcxo_1m", "vctcxo_3m", "vctcxo_24m"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/ti/ti,j721e-system-controller.yaml b/sys/contrib/device-tree/Bindings/soc/ti/ti,j721e-system-controller.yaml index 378e9cc5fac2..f3bd0be3b279 100644 --- a/sys/contrib/device-tree/Bindings/soc/ti/ti,j721e-system-controller.yaml +++ b/sys/contrib/device-tree/Bindings/soc/ti/ti,j721e-system-controller.yaml @@ -26,6 +26,7 @@ properties: compatible: items: - enum: + - ti,am654-system-controller - ti,j7200-system-controller - ti,j721e-system-controller - ti,j721s2-system-controller @@ -68,6 +69,23 @@ patternProperties: description: The node corresponding to SoC chip identification. + "^pcie-ctrl@[0-9a-f]+$": + type: object + description: + The node corresponding to PCIe control register. + + "^clock@[0-9a-f]+$": + type: object + $ref: /schemas/soc/ti/ti,am654-serdes-ctrl.yaml# + description: + This is the Serdes Control region. + + "^dss-oldi-io-ctrl@[0-9a-f]+$": + type: object + $ref: /schemas/mfd/syscon.yaml# + description: + This is the DSS OLDI CTRL region. + required: - compatible - reg @@ -110,5 +128,10 @@ examples: compatible = "ti,am654-chipid"; reg = <0x14 0x4>; }; + + pcie0_ctrl: pcie-ctrl@4070 { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x4070 0x4>; + }; }; ... diff --git a/sys/contrib/device-tree/Bindings/soc/ti/ti,j784s4-bist.yaml b/sys/contrib/device-tree/Bindings/soc/ti/ti,j784s4-bist.yaml new file mode 100644 index 000000000000..a73691cf5624 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/ti/ti,j784s4-bist.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2025 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,j784s4-bist.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 BIST + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: + The BIST (Built-In Self Test) module is an IP block present in K3 devices + that support triggering of BIST tests, both PBIST (Memory BIST) and LBIST + (Logic BIST) on a core. Both tests are destructive in nature. At boot, BIST + is executed by hardware for the MCU domain automatically as part of HW POST. + +properties: + compatible: + const: ti,j784s4-bist + + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: ctrl_mmr + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ti,sci-dev-id + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + safety-selftest@33c0000 { + compatible = "ti,j784s4-bist"; + reg = <0x00 0x033c0000 0x00 0x400>, + <0x00 0x0010c1a0 0x00 0x01c>; + reg-names = "cfg", "ctrl_mmr"; + clocks = <&k3_clks 237 7>; + power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>; + ti,sci-dev-id = <234>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml b/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml index 3cb1471cc6b6..927b3200e29e 100644 --- a/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml +++ b/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml @@ -92,6 +92,16 @@ properties: description: | This property is as per sci-pm-domain.txt. + clocks: + items: + - description: ICSSG_CORE Clock + - description: ICSSG_IEP Clock + - description: ICSSG_RGMII_MHZ_250 Clock + - description: ICSSG_RGMII_MHZ_50 Clock + - description: ICSSG_RGMII_MHZ_5 Clock + - description: ICSSG_UART Clock + - description: ICSSG_ICLK Clock + patternProperties: memories@[a-f0-9]+$: diff --git a/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml b/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml index 0df41c4f60c1..56b16183c885 100644 --- a/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml +++ b/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml @@ -121,13 +121,13 @@ examples: }; wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&am335x_mailbox &mbox_wkupm3>; - ti,vtt-gpio-pin = <7>; - firmware-name = "am335x-evm-scale-data.bin"; + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; }; }; @@ -155,20 +155,20 @@ examples: pinctrl-0 = <&ddr3_vtt_toggle_default>; ddr3_vtt_toggle_default: ddr_vtt_toggle_default { - pinctrl-single,pins = < + pinctrl-single,pins = < 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) - >; + >; }; }; wkup_m3_ipc@1324 { - compatible = "ti,am4372-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&am437x_mailbox &mbox_wkupm3>; - ti,set-io-isolation; - firmware-name = "am43x-evm-scale-data.bin"; + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; }; }; diff --git a/sys/contrib/device-tree/Bindings/soc/xilinx/xilinx.yaml b/sys/contrib/device-tree/Bindings/soc/xilinx/xilinx.yaml index 131aba5ed9f4..fb5c39c79d28 100644 --- a/sys/contrib/device-tree/Bindings/soc/xilinx/xilinx.yaml +++ b/sys/contrib/device-tree/Bindings/soc/xilinx/xilinx.yaml @@ -9,8 +9,8 @@ title: Xilinx Zynq Platforms maintainers: - Michal Simek <michal.simek@amd.com> -description: | - Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC +description: + AMD/Xilinx boards with ARM 32/64bits cores properties: $nodename: @@ -187,6 +187,13 @@ properties: - const: qemu,mbv - const: amd,mbv + - description: Xilinx Versal NET VN-X revA platform + items: + enum: + - xlnx,versal-net-vnx-revA + - xlnx,versal-net-vnx + - xlnx,versal-net + additionalProperties: true ... |