diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/soc')
76 files changed, 6919 insertions, 180 deletions
diff --git a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,canvas.yaml b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,canvas.yaml index 02b2d5ba01d6..cd06865e1f2a 100644 --- a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,canvas.yaml +++ b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,canvas.yaml @@ -2,13 +2,13 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Canvas Video Lookup Table maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Maxime Jourdan <mjourdan@baylibre.com> description: | @@ -48,4 +48,3 @@ examples: compatible = "amlogic,canvas"; reg = <0x48 0x14>; }; - diff --git a/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml new file mode 100644 index 000000000000..77c281153010 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-clk-measure.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Internal Clock Measurer + +description: + The Amlogic SoCs contains an IP to measure the internal clocks. + The precision is multiple of MHz, useful to debug the clock states. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - amlogic,meson-gx-clk-measure + - amlogic,meson8-clk-measure + - amlogic,meson8b-clk-measure + - amlogic,meson-axg-clk-measure + - amlogic,meson-g12a-clk-measure + - amlogic,meson-sm1-clk-measure + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + clock-measure@8758 { + compatible = "amlogic,meson-gx-clk-measure"; + reg = <0x8758 0x10>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/aspeed/uart-routing.yaml b/sys/contrib/device-tree/Bindings/soc/aspeed/uart-routing.yaml new file mode 100644 index 000000000000..6876407124dc --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/aspeed/uart-routing.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# # Copyright (c) 2018 Google LLC +# # Copyright (c) 2021 Aspeed Technology Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Aspeed UART Routing Controller + +maintainers: + - Oskar Senft <osk@google.com> + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> + +description: + The Aspeed UART routing control allow to dynamically route the inputs for + the built-in UARTS and physical serial I/O ports. + + This allows, for example, to connect the output of UART to another UART. + This can be used to enable Host <-> BMC communication via UARTs, e.g. to + allow access to the Host's serial console. + + This driver is for the BMC side. The sysfs files allow the BMC userspace + which owns the system configuration policy, to configure how UARTs and + physical serial I/O ports are routed. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-uart-routing + - aspeed,ast2500-uart-routing + - aspeed,ast2600-uart-routing + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + uart_routing: uart-routing@98 { + compatible = "aspeed,ast2600-uart-routing"; + reg = <0x98 0x8>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm23550-cdc.yaml new file mode 100644 index 000000000000..1a952f569803 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm23550-cdc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 Cluster Dormant Control + +description: + The Cluster Dormant Control block keeps the CPU in idle state. A command + needs to be sent to this block to bring the CPU into running state. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm23550-cdc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cdc@3fe0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x3fe0e000 0x78>; + }; +... diff --git a/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm2835-pm.yaml b/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm2835-pm.yaml new file mode 100644 index 000000000000..e28ef198a801 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm2835-pm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 PM (Power domains, watchdog) + +description: | + The PM block controls power domains and some reset lines, and includes a + watchdog timer. + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm2835-pm + - brcm,bcm2711-pm + - const: brcm,bcm2835-pm-wdt + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: pm + - const: asb + - const: rpivid_asb + + "#power-domain-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: v3d + - const: peri_image + - const: h264 + - const: isp + + system-power-controller: + type: boolean + + timeout-sec: true + +required: + - compatible + - reg + - "#power-domain-cells" + - "#reset-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + reg-names = "pm", "asb"; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm2835-vchiq.yaml b/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm2835-vchiq.yaml new file mode 100644 index 000000000000..e04439b3355b --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/bcm/brcm,bcm2835-vchiq.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-vchiq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VCHIQ firmware services + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +description: + The VCHIQ communication channel can be provided by BCM283x and Capri SoCs, + to communicate with the VPU-side OS services. + +properties: + compatible: + oneOf: + - description: BCM2835 based boards + items: + - enum: + - brcm,bcm2835-vchiq + + - description: BCM2836/BCM2837 based boards + items: + - enum: + - brcm,bcm2836-vchiq + - const: brcm,bcm2835-vchiq + + reg: + description: Physical base address and length of the doorbell register pair + minItems: 1 + + interrupts: + description: Interrupt number of the doorbell interrupt + minItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + mailbox@7e00b840 { + compatible = "brcm,bcm2835-vchiq"; + reg = <0x7e00b840 0xf>; + interrupts = <0 2>; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml new file mode 100644 index 000000000000..ec888f48cac8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM QUICC Multichannel Controller (QMC) + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one + serial controller using the same TDM physical interface routed from TSA. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-scc-qmc + - fsl,mpc866-scc-qmc + - const: fsl,cpm1-scc-qmc + + reg: + items: + - description: SCC (Serial communication controller) register base + - description: SCC parameter ram base + - description: Dual port ram base + + reg-names: + items: + - const: scc_regs + - const: scc_pram + - const: dpram + + interrupts: + maxItems: 1 + description: SCC interrupt line in the CPM interrupt controller + + fsl,tsa-serial: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to TSA node + - enum: [1, 2, 3] + description: | + TSA serial interface (dt-bindings/soc/cpm1-fsl,tsa.h defines these + values) + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + description: + Should be a phandle/number pair. The phandle to TSA node and the TSA + serial interface to use. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^channel@([0-9]|[1-5][0-9]|6[0-3])$': + description: + A channel managed by this controller + type: object + + properties: + reg: + minimum: 0 + maximum: 63 + description: + The channel number + + fsl,operational-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [transparent, hdlc] + default: transparent + description: | + The channel operational mode + - hdlc: The channel handles HDLC frames + - transparent: The channel handles raw data without any processing + + fsl,reverse-data: + $ref: /schemas/types.yaml#/definitions/flag + description: + The bit order as seen on the channels is reversed, + transmitting/receiving the MSB of each octet first. + This flag is used only in 'transparent' mode. + + fsl,tx-ts-mask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + Channel assigned Tx time-slots within the Tx time-slots routed by the + TSA to this cell. + + fsl,rx-ts-mask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + Channel assigned Rx time-slots within the Rx time-slots routed by the + TSA to this cell. + + required: + - reg + - fsl,tx-ts-mask + - fsl,rx-ts-mask + +required: + - compatible + - reg + - reg-names + - interrupts + - fsl,tsa-serial + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/cpm1-fsl,tsa.h> + + qmc@a60 { + compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc"; + reg = <0xa60 0x20>, + <0x3f00 0xc0>, + <0x2000 0x1000>; + reg-names = "scc_regs", "scc_pram", "dpram"; + interrupts = <27>; + interrupt-parent = <&CPM_PIC>; + + #address-cells = <1>; + #size-cells = <0>; + + fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>; + + channel@16 { + /* Ch16 : First 4 even TS from all routed from TSA */ + reg = <16>; + fsl,mode = "transparent"; + fsl,reverse-data; + fsl,tx-ts-mask = <0x00000000 0x000000aa>; + fsl,rx-ts-mask = <0x00000000 0x000000aa>; + }; + + channel@17 { + /* Ch17 : First 4 odd TS from all routed from TSA */ + reg = <17>; + fsl,mode = "transparent"; + fsl,reverse-data; + fsl,tx-ts-mask = <0x00000000 0x00000055>; + fsl,rx-ts-mask = <0x00000000 0x00000055>; + }; + + channel@19 { + /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */ + reg = <19>; + fsl,mode = "hdlc"; + fsl,tx-ts-mask = <0x00000000 0x0000ff00>; + fsl,rx-ts-mask = <0x00000000 0x0000ff00>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml new file mode 100644 index 000000000000..7e51c639a79a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The TSA is the time-slot assigner that can be found on some PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal serial + controllers. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: object + + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, Tx sync, Rx + clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four pins are used. + With the 'fsl,common-rxtx-pins' property, two pins are used. + + clocks: + minItems: 2 + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + + clock-names: + minItems: 2 + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclk + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the Rx + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the Tx + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sampled with + the falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + patternProperties: + '^fsl,[rt]x-ts-routes$': + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tuple that indicates the Tx or Rx time-slots routes. + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source (Tx) or destination (Rx) serial interface + (dt-bindings/soc/cpm1-fsl,tsa.h defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + else: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/cpm1-fsl,tsa.h> + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = <2 0>, /* TS 0..1 */ + <24 FSL_CPM_TSA_SCC4>, /* TS 2..25 */ + <1 0>, /* TS 26 */ + <5 FSL_CPM_TSA_SCC3>; /* TS 27..31 */ + + fsl,rx-ts-routes = <2 0>, /* TS 0..1 */ + <24 FSL_CPM_TSA_SCC4>, /* 2..25 */ + <1 0>, /* TS 26 */ + <5 FSL_CPM_TSA_SCC3>; /* TS 27..31 */ + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml new file mode 100644 index 000000000000..397f75909b20 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Device Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + DCFG is the device configuration unit, that provides general purpose + configuration and status for the device. Such as setting the secondary + core start address and release the secondary core from holdoff and + startup. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,ls1012a-dcfg + - fsl,ls1021a-dcfg + - fsl,ls1043a-dcfg + - fsl,ls1046a-dcfg + - fsl,ls1088a-dcfg + - fsl,ls2080a-dcfg + - fsl,lx2160a-dcfg + - const: syscon + + - items: + - enum: + - fsl,ls1028a-dcfg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^clock-controller@[0-9a-z]+$": + $ref: /schemas/clock/fsl,flexspi-clock.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x1ee0000 0x10000>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,layerscape-scfg.yaml new file mode 100644 index 000000000000..8d088b5fe823 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Supplemental Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + SCFG is the supplemental configuration unit, that provides SoC specific + configuration and status registers for the chip. Such as getting PEX port + status. + +properties: + compatible: + items: + - enum: + - fsl,ls1012a-scfg + - fsl,ls1021a-scfg + - fsl,ls1028a-scfg + - fsl,ls1043a-scfg + - fsl,ls1046a-scfg + - const: syscon + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^interrupt-controller@[a-z0-9]+$": + $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x1570000 0x10000>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml new file mode 100644 index 000000000000..1da1b758b4ae --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IOMUX Controller General Purpose Registers + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: + i.MX Processors have an IOMUXC General Purpose Register group for + various System Settings + +properties: + compatible: + oneOf: + - items: + - const: fsl,imx8mq-iomuxc-gpr + - const: syscon + - const: simple-mfd + - items: + - enum: + - fsl,imx8mm-iomuxc-gpr + - fsl,imx8mn-iomuxc-gpr + - fsl,imx8mp-iomuxc-gpr + - const: syscon + + reg: + maxItems: 1 + + mux-controller: + type: object + $ref: /schemas/mux/reg-mux.yaml + +additionalProperties: false + +required: + - compatible + - reg + +examples: + # Pinmux controller node + - | + iomuxc_gpr: syscon@30340000 { + compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd"; + reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml new file mode 100644 index 000000000000..a02a09d574a2 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM DISP blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: csi-bridge + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 10 + maxItems: 10 + + clock-names: + items: + - const: csi-bridge-axi + - const: csi-bridge-apb + - const: csi-bridge-core + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + blk-ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_mipi>, <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", "lcdif", + "mipi-dsi", "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml new file mode 100644 index 000000000000..25109376d7d4 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-vpu-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 4 + + power-domain-names: + maxItems: 4 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mm-vpu-blk-ctrl + then: + properties: + power-domains: + items: + - description: bus power domain + - description: G1 decoder power domain + - description: G2 decoder power domain + - description: H1 encoder power domain + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: h1 + + clocks: + items: + - description: G1 decoder clk + - description: G2 decoder clk + - description: H1 encoder clk + + clock-names: + items: + - const: g1 + - const: g2 + - const: h1 + + interconnects: + items: + - description: G1 decoder interconnect + - description: G2 decoder interconnect + - description: H1 encoder power domain + + interconnect-names: + items: + - const: g1 + - const: g2 + - const: h1 + + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-vpu-blk-ctrl + then: + properties: + power-domains: + items: + - description: bus power domain + - description: G1 decoder power domain + - description: G2 decoder power domain + - description: VC8000E encoder power domain + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: vc8000e + + clocks: + items: + - description: G1 decoder clk + - description: G2 decoder clk + - description: VC8000E encoder clk + + clock-names: + items: + - const: g1 + - const: g2 + - const: vc8000e + + interconnects: + items: + - description: G1 decoder interconnect + - description: G2 decoder interconnect + - description: VC8000E encoder interconnect + + interconnect-names: + items: + - const: g1 + - const: g2 + - const: vc8000e + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml new file mode 100644 index 000000000000..eeec9965b091 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MN DISP blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mn-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: isi + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: disp_axi + - const: disp_apb + - const: disp_axi_root + - const: disp_apb_root + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + #include <dt-bindings/power/imx8mn-power.h> + + blk-ctrl@32e28000 { + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_dispmix>, <&pgc_mipi>, + <&pgc_mipi>; + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi", + "mipi-csi"; + clocks = <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>, + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>; + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml new file mode 100644 index 000000000000..1be4ce2a45e8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HDMI blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display pipeline + peripherals located in the HDMI domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hdmi-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 8 + maxItems: 8 + + power-domain-names: + items: + - const: bus + - const: irqsteer + - const: lcdif + - const: pai + - const: pvi + - const: trng + - const: hdmi-tx + - const: hdmi-tx-phy + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: apb + - const: axi + - const: ref_266m + - const: ref_24m + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: hrv + - const: lcdif-hdmi + - const: hdcp + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32fc0000 { + compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon"; + reg = <0x32fc0000 0x23c>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "axi", "ref_266m", "ref_24m"; + power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmi_phy>; + power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", + "hdmi-tx", "hdmi-tx-phy"; + #power-domain-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml new file mode 100644 index 000000000000..4214c1ab4971 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HSIO blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the high-speed IO + (USB an PCIe) peripherals located in the HSIO domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hsio-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 6 + maxItems: 6 + + power-domain-names: + items: + - const: bus + - const: usb + - const: usb-phy1 + - const: usb-phy2 + - const: pcie + - const: pcie-phy + + '#clock-cells': + const: 0 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: usb + - const: pcie + + interconnects: + maxItems: 4 + + interconnect-names: + items: + - const: noc-pcie + - const: usb1 + - const: usb2 + - const: pcie + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32f10000 { + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; + reg = <0x32f10000 0x24>; + clocks = <&clk IMX8MP_CLK_USB_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "usb", "pcie"; + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>, + <&pgc_usb1_phy>, <&pgc_usb2_phy>, + <&pgc_hsiomix>, <&pgc_pcie_phy>; + power-domain-names = "bus", "usb", "usb-phy1", + "usb-phy2", "pcie", "pcie-phy"; + #power-domain-cells = <1>; + #clock-cells = <0>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml new file mode 100644 index 000000000000..ea9aa876ed13 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP Media Block Control + +maintainers: + - Paul Elder <paul.elder@ideasonboard.com> + +description: + The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral + providing access to the NoC and ensuring proper power sequencing of the + peripherals within the MEDIAMIX domain. + +properties: + compatible: + items: + - const: fsl,imx8mp-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 10 + + power-domain-names: + items: + - const: bus + - const: mipi-dsi1 + - const: mipi-csi1 + - const: lcdif1 + - const: isi + - const: mipi-csi2 + - const: lcdif2 + - const: isp + - const: dwe + - const: mipi-dsi2 + + clocks: + items: + - description: The APB clock + - description: The AXI clock + - description: The pixel clock for the first CSI2 receiver (aclk) + - description: The pixel clock for the second CSI2 receiver (aclk) + - description: The pixel clock for the first LCDIF (pix_clk) + - description: The pixel clock for the second LCDIF (pix_clk) + - description: The core clock for the ISP (clk) + - description: The MIPI-PHY reference clock used by DSI + + clock-names: + items: + - const: apb + - const: axi + - const: cam1 + - const: cam2 + - const: disp1 + - const: disp2 + - const: isp + - const: phy + + interconnects: + maxItems: 8 + + interconnect-names: + items: + - const: lcdif-rd + - const: lcdif-wr + - const: isi0 + - const: isi1 + - const: isi2 + - const: isp0 + - const: isp1 + - const: dwe + + bridge@5c: + type: object + $ref: /schemas/display/bridge/fsl,ldb.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - '#power-domain-cells' + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; + reg = <0x32ec0000 0x138>; + power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>, + <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>, + <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>, + <&mipi_phy2_pd>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi", + "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", + "isp", "phy"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + + bridge@5c { + compatible = "fsl,imx8mp-ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml new file mode 100644 index 000000000000..ea5c90c6a1b6 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MQ VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mq-vpu-blk-ctrl + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 3 + maxItems: 3 + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: g1 + - const: g2 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + + blk-ctrl@38320000 { + compatible = "fsl,imx8mq-vpu-blk-ctrl"; + reg = <0x38320000 0x100>; + power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>; + power-domain-names = "bus", "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + clock-names = "g1", "g2"; + #power-domain-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml new file mode 100644 index 000000000000..b3554e7f9e76 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX93 Media blk-ctrl + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: + The i.MX93 MEDIAMIX domain contains control and status registers known + as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include + clocking, reset, and miscellaneous top-level controls for peripherals + within the MEDIAMIX domain + +properties: + compatible: + items: + - const: fsl,imx93-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 10 + + clock-names: + items: + - const: apb + - const: axi + - const: nic + - const: disp + - const: cam + - const: pxp + - const: lcdif + - const: isi + - const: csi + - const: dsi + +required: + - compatible + - reg + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/power/fsl,imx93-power.h> + + system-controller@4ac10000 { + compatible = "fsl,imx93-media-blk-ctrl", "syscon"; + reg = <0x4ac10000 0x10000>; + power-domains = <&mediamix>; + clocks = <&clk IMX93_CLK_MEDIA_APB>, + <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_NIC_MEDIA_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_CAM_PIX>, + <&clk IMX93_CLK_PXP_GATE>, + <&clk IMX93_CLK_LCDIF_GATE>, + <&clk IMX93_CLK_ISI_GATE>, + <&clk IMX93_CLK_MIPI_CSI_GATE>, + <&clk IMX93_CLK_MIPI_DSI_GATE>; + clock-names = "apb", "axi", "nic", "disp", "cam", + "pxp", "lcdif", "isi", "csi", "dsi"; + #power-domain-cells = <1>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx93-src.yaml b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx93-src.yaml new file mode 100644 index 000000000000..9ce8d8b427fa --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/imx/fsl,imx93-src.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX93 System Reset Controller + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + The System Reset Controller (SRC) is responsible for the generation of + all the system reset signals and boot argument latching. + + Its main functions are as follows, + - Deals with all global system reset sources from other modules, + and generates global system reset. + - Responsible for power gating of MIXs (Slices) and their memory + low power control. + +properties: + compatible: + items: + - const: fsl,imx93-src + - const: syscon + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "power-domain@[0-9a-f]+$": + type: object + additionalProperties: false + + properties: + compatible: + items: + - const: fsl,imx93-src-slice + + '#power-domain-cells': + const: 0 + + reg: + items: + - description: mix slice register region + - description: mem slice register region + + clocks: + description: | + A number of phandles to clocks that need to be enabled + during domain power-up sequencing to ensure reset + propagation into devices located inside this power domain. + minItems: 1 + maxItems: 5 + + required: + - compatible + - '#power-domain-cells' + - reg + +required: + - compatible + - reg + - ranges + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx93-clock.h> + + system-controller@44460000 { + compatible = "fsl,imx93-src", "syscon"; + reg = <0x44460000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mediamix: power-domain@0 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/intel/intel,hps-copy-engine.yaml b/sys/contrib/device-tree/Bindings/soc/intel/intel,hps-copy-engine.yaml new file mode 100644 index 000000000000..8634865015cd --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/intel/intel,hps-copy-engine.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach <matthew.gerlach@linux.intel.com> + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus"; + reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/litex/litex,soc-controller.yaml b/sys/contrib/device-tree/Bindings/soc/litex/litex,soc-controller.yaml index c8b57c7fd08c..ecae9fa8561b 100644 --- a/sys/contrib/device-tree/Bindings/soc/litex/litex,soc-controller.yaml +++ b/sys/contrib/device-tree/Bindings/soc/litex/litex,soc-controller.yaml @@ -35,7 +35,6 @@ examples: soc_ctrl0: soc-controller@f0000000 { compatible = "litex,soc-controller"; reg = <0xf0000000 0xc>; - status = "okay"; }; ... diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/devapc.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/devapc.yaml index 31e4d3c339bf..99e2caafeadf 100644 --- a/sys/contrib/device-tree/Bindings/soc/mediatek/devapc.yaml +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/devapc.yaml @@ -2,8 +2,8 @@ # # Copyright 2020 MediaTek Inc. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/mediatek/devapc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/mediatek/devapc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MediaTek Device Access Permission Control driver @@ -20,6 +20,7 @@ properties: compatible: enum: - mediatek,mt6779-devapc + - mediatek,mt8186-devapc reg: description: The base address of devapc register bank diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,ccorr.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,ccorr.yaml new file mode 100644 index 000000000000..4380b98b0dfe --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,ccorr.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek color correction + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek color correction with 3X3 matrix. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-ccorr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + clocks: + minItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + + mdp3_ccorr: mdp3-ccorr@1401c000 { + compatible = "mediatek,mt8183-mdp3-ccorr"; + reg = <0x1401c000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>, + <CMDQ_EVENT_MDP_CCORR_EOF>; + clocks = <&mmsys CLK_MM_MDP_CCORR>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml new file mode 100644 index 000000000000..8e6ba2ec8a43 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The MediaTek wo-ccif provides a configuration interface for WED WO + controller used to perfrom offload rx packet processing (e.g. 802.11 + aggregation packet reordering or rx header translation) on MT7986 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7986-wo-ccif + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + syscon@151a5000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151a5000 0 0x1000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mutex.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mutex.yaml new file mode 100644 index 000000000000..ba2014a8725c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,mutex.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek mutex + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek mutex, namely MUTEX, is used to send the triggers signals called + Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display + data path or MDP data path. + In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects + the shadow register. + MUTEX device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8167-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8183-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8188-disp-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + - mediatek,mt8195-vpp-mutex + - mediatek,mt8365-disp-mutex + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: MUTEX Clock + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + then: + required: + - clocks + + +required: + - compatible + - reg + - interrupts + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mutex: mutex@14020000 { + compatible = "mediatek,mt8173-disp-mutex"; + reg = <0 0x14020000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; + mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, + <CMDQ_EVENT_MUTEX1_STREAM_EOF>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,pwrap.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,pwrap.yaml new file mode 100644 index 000000000000..a06ac2177444 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,pwrap.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek PMIC Wrapper + +maintainers: + - Flora Fu <flora.fu@mediatek.com> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: + On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface + is not directly visible to the CPU, but only through the PMIC wrapper + inside the SoC. The communication between the SoC and the PMIC can + optionally be encrypted. Also a non standard Dual IO SPI mode can be + used to increase speed. + + IP Pairing + + On MT8135 the pins of some SoC internal peripherals can be on the PMIC. + The signals of these pins are routed over the SPI bus using the pwrap + bridge. In the binding description below the properties needed for bridging + are marked with "IP Pairing". These are optional on SoCs which do not support + IP Pairing + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-pwrap + - mediatek,mt6765-pwrap + - mediatek,mt6779-pwrap + - mediatek,mt6795-pwrap + - mediatek,mt6797-pwrap + - mediatek,mt6873-pwrap + - mediatek,mt7622-pwrap + - mediatek,mt8135-pwrap + - mediatek,mt8173-pwrap + - mediatek,mt8183-pwrap + - mediatek,mt8186-pwrap + - mediatek,mt8188-pwrap + - mediatek,mt8195-pwrap + - mediatek,mt8365-pwrap + - mediatek,mt8516-pwrap + - items: + - enum: + - mediatek,mt8186-pwrap + - mediatek,mt8195-pwrap + - const: syscon + + reg: + minItems: 1 + items: + - description: PMIC wrapper registers + - description: IP pairing registers + + reg-names: + minItems: 1 + items: + - const: pwrap + - const: pwrap-bridge + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: SPI bus clock + - description: Main module clock + - description: System module clock + - description: Timer module clock + + clock-names: + minItems: 2 + items: + - const: spi + - const: wrap + - const: sys + - const: tmr + + resets: + minItems: 1 + items: + - description: PMIC wrapper reset + - description: IP pairing reset + + reset-names: + minItems: 1 + items: + - const: pwrap + - const: pwrap-bridge + + pmic: + type: object + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +dependentRequired: + resets: [reset-names] + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8365-pwrap + then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/mt8135-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + reg = <0 0x1000f000 0 0x1000>, + <0 0x11017000 0 0x1000>; + reg-names = "pwrap", "pwrap-bridge"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "spi", "wrap"; + resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>, + <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>; + reset-names = "pwrap", "pwrap-bridge"; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,wdma.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,wdma.yaml new file mode 100644 index 000000000000..69afb329e5f4 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mediatek,wdma.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Write Direct Memory Access + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek Write Direct Memory Access(WDMA) component used to write + the data into DMA. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-wdma + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + mdp3_wdma: mdp3-wdma@14006000 { + compatible = "mediatek,mt8183-mdp3-wdma"; + reg = <0x14006000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>, + <CMDQ_EVENT_MDP_WDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WDMA0>; + iommus = <&iommu>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/mtk-svs.yaml b/sys/contrib/device-tree/Bindings/soc/mediatek/mtk-svs.yaml new file mode 100644 index 000000000000..f21eb907ee90 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/mtk-svs.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Smart Voltage Scaling (SVS) + +maintainers: + - Roger Lu <roger.lu@mediatek.com> + - Matthias Brugger <matthias.bgg@gmail.com> + - Kevin Hilman <khilman@kernel.org> + +description: |+ + The SVS engine is a piece of hardware which has several + controllers(banks) for calculating suitable voltage to + different power domains(CPU/GPU/CCI) according to + chip process corner, temperatures and other factors. Then DVFS + driver could apply SVS bank voltage to PMIC/Buck. + +properties: + compatible: + enum: + - mediatek,mt8183-svs + - mediatek,mt8192-svs + + reg: + maxItems: 1 + description: Address range of the MTK SVS controller. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Main clock for MTK SVS controller to work. + + clock-names: + const: main + + nvmem-cells: + minItems: 1 + description: + Phandle to the calibration data provided by a nvmem device. + items: + - description: SVS efuse for SVS controller + - description: Thermal efuse for SVS controller + + nvmem-cell-names: + items: + - const: svs-calibration-data + - const: t-calibration-data + + resets: + maxItems: 1 + + reset-names: + items: + - const: svs_rst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/mediatek/pwrap.txt b/sys/contrib/device-tree/Bindings/soc/mediatek/pwrap.txt index 8051c17e640e..12e4b4260b40 100644 --- a/sys/contrib/device-tree/Bindings/soc/mediatek/pwrap.txt +++ b/sys/contrib/device-tree/Bindings/soc/mediatek/pwrap.txt @@ -27,22 +27,28 @@ Required properties in pwrap device node. "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs "mediatek,mt8183-pwrap" for MT8183 SoCs + "mediatek,mt8186-pwrap" for MT8186 SoCs + "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs + "mediatek,mt8195-pwrap" for MT8195 SoCs + "mediatek,mt8365-pwrap" for MT8365 SoCs "mediatek,mt8516-pwrap" for MT8516 SoCs - interrupts: IRQ for pwrap in SOC -- reg-names: Must include the following entries: +- reg-names: "pwrap" is required; "pwrap-bridge" is optional. "pwrap": Main registers base "pwrap-bridge": bridge base (IP Pairing) - reg: Must contain an entry for each entry in reg-names. -- reset-names: Must include the following entries: - "pwrap" - "pwrap-bridge" (IP Pairing) -- resets: Must contain an entry for each entry in reset-names. - clock-names: Must include the following entries: "spi": SPI bus clock "wrap": Main module clock + "sys": Optional system module clock + "tmr": Optional timer module clock - clocks: Must contain an entry for each entry in clock-names. Optional properities: +- reset-names: Some SoCs include the following entries: + "pwrap" + "pwrap-bridge" (IP Pairing) +- resets: Must contain an entry for each entry in reset-names. - pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt diff --git a/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 597d67fba92f..a46411149571 100644 --- a/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/sys/contrib/device-tree/Bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Timer Counter Block @@ -54,6 +54,7 @@ patternProperties: "^timer@[0-2]$": description: The timer block channels that are used as timers or counters. type: object + additionalProperties: false properties: compatible: items: @@ -75,7 +76,7 @@ patternProperties: "^pwm@[0-2]$": description: The timer block channels that are used as PWMs. - $ref: ../../pwm/pwm.yaml# + $ref: /schemas/pwm/pwm.yaml# type: object properties: compatible: diff --git a/sys/contrib/device-tree/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/sys/contrib/device-tree/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml new file mode 100644 index 000000000000..04ffee3a7c59 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + PolarFire SoC devices include a microcontroller acting as the system controller, + which provides "services" to the main processor and to the FPGA fabric. These + services include hardware rng, reprogramming of the FPGA and verfification of the + eNVM contents etc. More information on these services can be found online, at + https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html + + Communication with the system controller is done via a mailbox, of which the client + portion is documented here. + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,mpfs-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml b/sys/contrib/device-tree/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml new file mode 100644 index 000000000000..2cd3bc6bd8d6 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + The PolarFire SoC system controller is communicated with via a mailbox. + This document describes the bindings for the client portion of that mailbox. + + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,polarfire-soc-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller: syscontroller { + compatible = "microchip,polarfire-soc-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml b/sys/contrib/device-tree/Bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml new file mode 100644 index 000000000000..23e7e4ea01ff --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Global Control Registers block in Nuvoton SoCs + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + - Tomer Maimon <tmaimon77@gmail.com> + +description: + The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs + that expose misc functionality such as chip model and version information or + pinmux settings. + +properties: + compatible: + items: + - enum: + - nuvoton,wpcm450-gcr + - nuvoton,npcm750-gcr + - nuvoton,npcm845-gcr + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + gcr: syscon@800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd"; + reg = <0x800000 0x1000>; + + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x38 0x07>; + idle-states = <2>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml new file mode 100644 index 000000000000..9dc8e48c8af4 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Always-On Subsystem side channel + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + This binding describes the hardware component responsible for side channel + requests to the always-on subsystem (AOSS), used for certain power management + requests that is not handled by the standard RPMh interface. Each client in the + SoC has its own block of message RAM and IRQ for communication with the AOSS. + The protocol used to communicate in the message RAM is known as Qualcomm + Messaging Protocol (QMP) + + The AOSS side channel exposes control over a set of resources, used to control + a set of debug related clocks and to affect the low power state of resources + related to the secondary subsystems. + +properties: + compatible: + items: + - enum: + - qcom,qdu1000-aoss-qmp + - qcom,sa8775p-aoss-qmp + - qcom,sc7180-aoss-qmp + - qcom,sc7280-aoss-qmp + - qcom,sc8180x-aoss-qmp + - qcom,sc8280xp-aoss-qmp + - qcom,sdm845-aoss-qmp + - qcom,sm6350-aoss-qmp + - qcom,sm8150-aoss-qmp + - qcom,sm8250-aoss-qmp + - qcom,sm8350-aoss-qmp + - qcom,sm8450-aoss-qmp + - qcom,sm8550-aoss-qmp + - const: qcom,aoss-qmp + + reg: + maxItems: 1 + description: + The base address and size of the message RAM for this client's + communication with the AOSS + + interrupts: + maxItems: 1 + description: + Should specify the AOSS message IRQ for this client + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client, as described in mailbox/mailbox.txt + + "#clock-cells": + const: 0 + description: + The single clock represents the QDSS clock. + +required: + - compatible + - reg + - interrupts + - mboxes + - "#clock-cells" + +additionalProperties: false + +patternProperties: + "^(cx|mx|ebi)$": + type: object + description: + The AOSS side channel also provides the controls for three cooling devices, + these are expressed as subnodes of the QMP node. The name of the node is + used to identify the resource and must therefor be "cx", "mx" or "ebi". + + properties: + "#cooling-cells": + const: 2 + + required: + - "#cooling-cells" + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0c300000 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + mx_cdev: mx { + #cooling-cells = <2>; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,apr-services.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,apr-services.yaml new file mode 100644 index 000000000000..bdf482db32aa --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,apr-services.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR services shared parts + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic + Packet Router). + +properties: + reg: + minimum: 1 + maximum: 13 + description: | + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + GPR Service ID + 1 = Audio Process Manager Service + 2 = Proxy Resource Manager Service. + 3 = AMDB Service. + 4 = Voice processing manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Protection domain service name and path for APR service (if supported). + Possible values are:: + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + +required: + - reg + +additionalProperties: true diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,apr.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,apr.yaml new file mode 100644 index 000000000000..e51acdcaafaf --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,apr.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for + communication between Application processor and QDSP. APR/GPR is mainly + used for audio/voice services on the QDSP. + +properties: + compatible: + enum: + - qcom,apr + - qcom,apr-v2 + - qcom,gpr + + power-domains: + maxItems: 1 + + qcom,apr-domain: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6, 7] + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + deprecated: true + + qcom,domain: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + Selects the processor domain for gpr + 1 = Modem Domain + 2 = Audio DSP Domain + 3 = Application Processor Domain + + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + maxItems: 1 + + qcom,intents: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 32 + items: + items: + - description: size of each intent to preallocate + - description: amount of intents to preallocate + minimum: 1 + description: + List of (size, amount) pairs describing what intents should be + preallocated for this virtual channel. This can be used to tweak the + default intents available for the channel to meet expectations of the + remote. + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + items: + - const: apr_audio_svc + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^service@[1-9a-d]$": + type: object + $ref: /schemas/soc/qcom/qcom,apr-services.yaml + additionalProperties: true + description: + APR/GPR static port services. + + properties: + compatible: + enum: + - qcom,q6core + - qcom,q6asm + - qcom,q6afe + - qcom,q6adm + - qcom,q6apm + - qcom,q6prm + +required: + - compatible + - qcom,domain + +allOf: + - if: + properties: + compatible: + enum: + - qcom,gpr + then: + properties: + qcom,glink-channels: + items: + - const: adsp_apps + power-domains: false + else: + properties: + qcom,glink-channels: + items: + - const: apr_audio_svc + + - if: + required: + - qcom,glink-channels + then: + properties: + qcom,smd-channels: false + + - if: + required: + - qcom,smd-channels + then: + properties: + qcom,glink-channels: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + apr { + compatible = "qcom,apr-v2"; + qcom,domain = <APR_DOMAIN_ADSP>; + qcom,glink-channels = "apr_audio_svc"; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + + dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + /* ... */ + }; + /* ... */ + }; + }; + + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,glink-channels = "adsp_apps"; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml new file mode 100644 index 000000000000..ce7e20dd22c9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,dcc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Data Capture and Compare + +maintainers: + - Souradeep Chowdhury <quic_schowdhu@quicinc.com> + +description: | + DCC (Data Capture and Compare) is a DMA engine which is used to save + configuration data or system memory contents during catastrophic failure + or SW trigger. DCC is used to capture and store data for debugging purpose + +properties: + compatible: + items: + - enum: + - qcom,sm8150-dcc + - qcom,sc7280-dcc + - qcom,sc7180-dcc + - qcom,sdm845-dcc + - const: qcom,dcc + + reg: + items: + - description: DCC base + - description: DCC RAM base + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dma@10a2000{ + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x010a2000 0x1000>, + <0x010ad000 0x2000>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml new file mode 100644 index 000000000000..f2c5ec7e6437 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,eud.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Embedded USB Debugger + +maintainers: + - Souradeep Chowdhury <quic_schowdhu@quicinc.com> + +description: + This binding is used to describe the Qualcomm Embedded USB Debugger, which is + mini USB-hub implemented on chip to support USB-based debug capabilities. + +properties: + compatible: + items: + - enum: + - qcom,sc7280-eud + - const: qcom,eud + + reg: + items: + - description: EUD Base Register Region + - description: EUD Mode Manager Register + + interrupts: + description: EUD interrupt + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + These ports is to be attached to the endpoint of the DWC3 controller node + and type C connector node. The controller has the "usb-role-switch" + property. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: This port is to be attached to the DWC3 controller. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: This port is to be attached to the type C connector. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + eud@88e0000 { + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0x88e0000 0x2000>, + <0x88e2000 0x1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + + port@1 { + reg = <1>; + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml index 84671950ca0d..8a4b7ba3aaf6 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml @@ -1,14 +1,13 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: GENI Serial Engine QUP Wrapper Controller maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> description: | Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper @@ -22,20 +21,19 @@ properties: compatible: enum: - qcom,geni-se-qup + - qcom,geni-se-i2c-master-hub reg: description: QUP wrapper common register address and length. maxItems: 1 clock-names: - items: - - const: m-ahb - - const: s-ahb + minItems: 1 + maxItems: 2 clocks: - items: - - description: Master AHB Clock - - description: Slave AHB Clock + minItems: 1 + maxItems: 2 "#address-cells": const: 2 @@ -51,6 +49,9 @@ properties: interconnect-names: const: qup-core + iommus: + maxItems: 1 + required: - compatible - reg @@ -61,117 +62,56 @@ required: - ranges patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: Common properties for GENI Serial Engine based I2C, SPI and - UART controller. - - properties: - reg: - description: GENI Serial Engine register address and length. - maxItems: 1 - - clock-names: - const: se - - clocks: - description: Serial engine core clock needed by the device. - maxItems: 1 - - interconnects: - minItems: 2 - maxItems: 3 - - interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory - - required: - - reg - - clock-names - - clocks - "spi@[0-9a-f]+$": type: object description: GENI serial engine based SPI controller. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - $ref: /spi/spi-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-spi - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# "i2c@[0-9a-f]+$": type: object description: GENI serial engine based I2C controller. - $ref: /schemas/i2c/i2c-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-i2c - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - clock-frequency: - description: Desired I2C bus clock frequency in Hz. - default: 100000 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# "serial@[0-9a-f]+$": type: object description: GENI Serial Engine based UART Controller. - $ref: /schemas/serial.yaml# - - properties: - compatible: - enum: - - qcom,geni-uart - - qcom,geni-debug-uart - - interrupts: - minItems: 1 - maxItems: 2 - items: - - description: UART core irq - - description: Wakeup irq (RX GPIO) - - required: - - compatible - - interrupts + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,geni-se-i2c-master-hub + then: + properties: + clock-names: + items: + - const: s-ahb + + clocks: + items: + - description: Slave AHB Clock + + iommus: false + + patternProperties: + "spi@[0-9a-f]+$": false + "serial@[0-9a-f]+$": false + else: + properties: + clock-names: + items: + - const: m-ahb + - const: s-ahb + + clocks: + items: + - description: Master AHB Clock + - description: Slave AHB Clock additionalProperties: false diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,gsbi.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,gsbi.yaml new file mode 100644 index 000000000000..c33704333e49 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,gsbi.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm General Serial Bus Interface (GSBI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The GSBI controller is modeled as a node with zero or more child nodes, each + representing a serial sub-node device that is mux'd as part of the GSBI + configuration settings. The mode setting will govern the input/output mode + of the 4 GSBI IOs. + + A GSBI controller node can contain 0 or more child nodes representing serial + devices. These serial devices can be a QCOM UART, I2C controller, spi + controller, or some combination of aforementioned devices. + +properties: + compatible: + const: qcom,gsbi-v1.0.0 + + '#address-cells': + const: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The GSBI index. + + clocks: + maxItems: 1 + + clock-names: + const: iface + + qcom,crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + CRCI MUX value for QUP CRCI ports. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + + qcom,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + MUX value for configuration of the serial interface. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid mux values. + + '#size-cells': + const: 1 + + syscon-tcsr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of TCSR syscon node.Required if child uses dma. + + ranges: true + + reg: + maxItems: 1 + +patternProperties: + "spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/qcom,spi-qup.yaml# + + "i2c@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/qcom,i2c-qup.yaml# + + "serial@[0-9a-f]+$": + type: object + $ref: /schemas/serial/qcom,msm-uartdm.yaml# + +required: + - compatible + - cell-index + - clocks + - clock-names + - qcom,mode + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8960.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,gsbi.h> + + gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* UART chosen */ + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml new file mode 100644 index 000000000000..aae9cf7b8caf --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Ramp Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The Ramp Controller is used to program the sequence ID for pulse + swallowing, enable sequences and link Sequence IDs (SIDs) for the + CPU cores on some Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,msm8976-ramp-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpu-power-controller@b014000 { + compatible = "qcom,msm8976-ramp-controller"; + reg = <0x0b014000 0x68>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml new file mode 100644 index 000000000000..6440dc801387 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,pmic-glink.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC GLINK firmware interface for battery management, USB + Type-C and other things. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + The PMIC GLINK service, running on a coprocessor on some modern Qualcomm + platforms and implement USB Type-C handling and battery management. This + binding describes the component in the OS used to communicate with the + firmware and connect it's resources to those described in the Devicetree, + particularly the USB Type-C controllers relationship with USB and DisplayPort + components. + +properties: + compatible: + items: + - enum: + - qcom,sc8180x-pmic-glink + - qcom,sc8280xp-pmic-glink + - qcom,sm8350-pmic-glink + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + - const: qcom,pmic-glink + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^connector@\d$': + $ref: /schemas/connector/usb-connector.yaml# + + properties: + reg: true + + required: + - reg + + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - |+ + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_role>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&ss_phy_out>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&sbu_mux>; + }; + }; + }; + }; + }; +... + diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm-master-stats.yaml new file mode 100644 index 000000000000..031800985b5e --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm-master-stats.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + The Qualcomm RPM (Resource Power Manager) architecture includes a concept + of "RPM Masters". They can be thought of as "the local gang leaders", usually + spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions + (particularly around entering hardware-driven low power modes: XO shutdown + and total system-wide power collapse) are first made at Master-level, and + only then aggregated for the entire system. + + The Master Stats provide a few useful bits that can be used to assess whether + our device has entered the desired low-power mode, how long it took to do so, + the duration of that residence, how long it took to come back online, + how many times a given sleep state was entered and which cores are actively + voting for staying awake. + + This scheme has been used on various SoCs in the 2013-2023 era, with some + newer or higher-end designs providing this information through an SMEM query. + +properties: + compatible: + const: qcom,rpm-master-stats + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Phandle to an RPM MSG RAM slice containing the master stats + minItems: 1 + maxItems: 5 + + qcom,master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + The name of the RPM Master which owns the MSG RAM slice where this + instance of Master Stats resides + minItems: 1 + maxItems: 5 + +required: + - compatible + - qcom,rpm-msg-ram + - qcom,master-names + +additionalProperties: false + +examples: + - | + stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&adsp_master_stats>, + <&cdsp_master_stats>, + <&tz_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "ADSP", + "CDSP", + "TZ"; + }; +... diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml new file mode 100644 index 000000000000..b00be9e01206 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) + +description: + This driver is used to interface with the Resource Power Manager (RPM) found + in various Qualcomm platforms. The RPM allows each component in the system + to vote for state of the system resources, such as clocks, regulators and bus + frequencies. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + enum: + - qcom,rpm-apq8064 + - qcom,rpm-msm8660 + - qcom,rpm-msm8960 + - qcom,rpm-ipq8064 + - qcom,rpm-mdm9615 + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: ack + - const: err + - const: wakeup + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the RPM. + +patternProperties: + "^regulators(-[01])?$": + type: object + $ref: /schemas/regulator/qcom,rpm-regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,ipc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/qcom-rpm.h> + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml new file mode 100644 index 000000000000..af632d0e0355 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMH RSC + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Resource Power Manager Hardened (RPMH) is the mechanism for communicating + with the hardened resource accelerators on Qualcomm SoCs. Requests to the + resources can be written to the Trigger Command Set (TCS) registers and + using a (addr, val) pair and triggered. Messages in the TCS are then sent in + sequence over an internal bus. + + The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity + (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and + active/wake resource requests. Multiple such DRVs can exist in a SoC and can + be written to from Linux. The structure of each DRV follows the same template + with a few variations that are captured by the properties here. + + A TCS may be triggered from Linux or triggered by the F/W after all the CPUs + have powered off to facilitate idle power saving. TCS could be classified as:: + ACTIVE - Triggered by Linux + SLEEP - Triggered by F/W + WAKE - Triggered by F/W + CONTROL - Triggered by F/W + See also:: <dt-bindings/soc/qcom,rpmh-rsc.h> + + The order in which they are described in the DT, should match the hardware + configuration. + + Requests can be made for the state of a resource, when the subsystem is + active or idle. When all subsystems like Modem, GPU, CPU are idle, the + resource state will be an aggregate of the sleep votes from each of those + subsystems. Clients may request a sleep value for their shared resources in + addition to the active mode requests. + + Drivers that want to use the RSC to communicate with RPMH must specify their + bindings as child nodes of the RSC controllers they wish to communicate with. + +properties: + compatible: + const: qcom,rpmh-rsc + + interrupts: + minItems: 1 + maxItems: 4 + description: + The interrupt that trips when a message complete/response is received for + this DRV from the accelerators. + Number of interrupts must match number of DRV blocks. + + label: + description: + Name for the RSC. The name would be used in trace logs. + + qcom,drv-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The ID of the DRV in the RSC block that will be used by this controller. + + qcom,tcs-config: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 4 + maxItems: 4 + items: + items: + - description: | + TCS type:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + description: | + The tuple defining the configuration of TCS. Must have two cells which + describe each TCS type. The order of the TCS must match the hardware + configuration. + + qcom,tcs-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The offset of the TCS blocks. + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + items: + - const: drv-0 + - const: drv-1 + - const: drv-2 + - const: drv-3 + + power-domains: + maxItems: 1 + + bcm-voter: + $ref: /schemas/interconnect/qcom,bcm-voter.yaml# + + clock-controller: + $ref: /schemas/clock/qcom,rpmhcc.yaml# + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + +patternProperties: + '^regulators(-[0-9])?$': + $ref: /schemas/regulator/qcom,rpmh-regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - interrupts + - qcom,drv-id + - qcom,tcs-config + - qcom,tcs-offset + - reg + - reg-names + - power-domains + +additionalProperties: false + +examples: + - | + // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of + // 2, the register offsets for DRV2 start at 0D00, the register + // calculations are like this:: + // DRV0: 0x179C0000 + // DRV2: 0x179C0000 + 0x10000 = 0x179D0000 + // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 + // TCS-OFFSET: 0xD00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; + }; + + - | + // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the + // register offsets for DRV0 start at 01C00, the register calculations are + // like this:: + // DRV0: 0xAF20000 + // TCS-OFFSET: 0x1C00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@af20000 { + compatible = "qcom,rpmh-rsc"; + reg = <0xaf20000 0x10000>; + reg-names = "drv-0"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + label = "disp_rsc"; + qcom,tcs-offset = <0x1c00>; + qcom,drv-id = <0>; + qcom,tcs-config = <ACTIVE_TCS 0>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x18200000 0x10000>, + <0x18210000 0x10000>, + <0x18220000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + + clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd-rpm.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd-rpm.yaml index 2684f22a1d85..65c02a7fef80 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd-rpm.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Resource Power Manager (RPM) over SMD +title: Qualcomm Resource Power Manager (RPM) over SMD/GLINK description: | This driver is used to interface with the Resource Power Manager (RPM) found @@ -12,9 +12,9 @@ description: | to vote for state of the system resources, such as clocks, regulators and bus frequencies. - The SMD information for the RPM edge should be filled out. See qcom,smd.txt - for the required edge properties. All SMD related properties will reside - within the RPM node itself. + The SMD or GLINK information for the RPM edge should be filled out. See + qcom,smd.yaml for the required edge properties. All SMD/GLINK related + properties will reside within the RPM node itself. The RPM exposes resources to its subnodes. The rpm_requests node must be present and this subnode may contain children that designate regulator @@ -25,38 +25,79 @@ description: | rpm_requests. maintainers: - - Kathiravan T <kathirav@codeaurora.org> + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> properties: compatible: enum: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 + - qcom,rpm-ipq9574 + - qcom,rpm-msm8226 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 + - qcom,rpm-msm8936 + - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 + - qcom,rpm-msm8994 - qcom,rpm-msm8996 - qcom,rpm-msm8998 - qcom,rpm-sdm660 + - qcom,rpm-sm6115 + - qcom,rpm-sm6125 + - qcom,rpm-sm6375 + - qcom,rpm-qcm2290 - qcom,rpm-qcs404 + clock-controller: + $ref: /schemas/clock/qcom,rpmcc.yaml# + unevaluatedProperties: false + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the RPM communication + items: + - const: rpm_requests + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication items: - const: rpm_requests +patternProperties: + "^regulators(-[01])?$": + $ref: /schemas/regulator/qcom,smd-rpm-regulator.yaml# + unevaluatedProperties: false + if: properties: compatible: contains: enum: - qcom,rpm-apq8084 + - qcom,rpm-msm8226 - qcom,rpm-msm8916 + - qcom,rpm-msm8936 - qcom,rpm-msm8974 + - qcom,rpm-msm8976 + - qcom,rpm-msm8953 + - qcom,rpm-msm8994 then: + properties: + qcom,glink-channels: false required: - qcom,smd-channels +else: + properties: + qcom,smd-channels: false + required: + - qcom,glink-channels required: - compatible @@ -76,12 +117,33 @@ examples: qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; - /* Regulator nodes to follow */ + power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-level = <1>; + }; + opp-2 { + opp-level = <2>; + }; + }; }; }; - }; -... + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd.yaml new file mode 100644 index 000000000000..063e595c12f7 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smd.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Driver + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Qualcomm Shared Memory Driver is a FIFO based communication channel for + sending data between the various subsystems in Qualcomm platforms. + +properties: + compatible: + const: qcom,smd + +patternProperties: + "^smd-edge|rpm$": + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# + unevaluatedProperties: false + description: + Each subnode of the SMD node represents a remote subsystem or a remote + processor of some sort - or in SMD language an "edge". The name of the + edges are not important. + +required: + - compatible + +additionalProperties: false + +examples: + # The following example represents a smd node, with one edge representing the + # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the + # "rpm_request" channel. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smem.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smem.yaml index f7e17713b3d8..bc7815d985e4 100644 --- a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smem.yaml +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smem.yaml @@ -1,23 +1,27 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Shared Memory Manager binding +title: Qualcomm Shared Memory Manager maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Qualcomm Shared Memory Manager, used to share data - between various subsystems and OSes in Qualcomm platforms. +description: + This binding describes the Qualcomm Shared Memory Manager, a region of + reserved-memory used to share data between various subsystems and OSes in + Qualcomm platforms. properties: compatible: const: qcom,smem + reg: + maxItems: 1 + memory-region: maxItems: 1 description: handle to memory reservation for main SMEM memory region. @@ -29,11 +33,19 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: handle to RPM message memory resource + no-map: true + required: - compatible - - memory-region - hwlocks +oneOf: + - required: + - reg + - no-map + - required: + - memory-region + additionalProperties: false examples: @@ -43,6 +55,20 @@ examples: #size-cells = <1>; ranges; + smem@fa00000 { + compatible = "qcom,smem"; + reg = <0xfa00000 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + }; + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + smem_region: smem@fa00000 { reg = <0xfa00000 0x200000>; no-map; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml new file mode 100644 index 000000000000..58500529b90f --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smp2p.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Point 2 Point + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory Point to Point (SMP2P) protocol facilitates communication + of a single 32-bit value between two processors. Each value has a single + writer (the local side) and a single reader (the remote side). Values are + uniquely identified in the system by the directed edge (local processor ID to + remote processor ID) and a string identifier. + +properties: + compatible: + const: qcom,smp2p + + interrupts: + maxItems: 1 + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote end of the smp2p edge. + + qcom,local-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the local endpoint of this edge. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote endpoint of this edge. + + qcom,smem: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maxItems: 2 + description: + Two identifiers of the inbound and outbound smem items used for this edge. + +patternProperties: + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$": + type: object + description: + Each SMP2P pair contain a set of inbound and outbound entries, these are + described in subnodes of the smp2p device node. The node names are not + important. + + properties: + interrupt-controller: + description: + Marks the entry as inbound; the node should be specified as a two + cell interrupt-controller. If not specified this node will denote + the outgoing entry. + + '#interrupt-cells': + const: 2 + + qcom,entry-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of this entry, for inbound entries this will be used to + match against the remotely allocated entry and for outbound entries + this name is used for allocating entries. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for outgoing entries. + + required: + - qcom,entry-name + + oneOf: + - required: + - interrupt-controller + - '#interrupt-cells' + - required: + - '#qcom,smem-state-cells' + + additionalProperties: false + +required: + - compatible + - interrupts + - qcom,local-pid + - qcom,remote-pid + - qcom,smem + +oneOf: + - required: + - mboxes + - required: + - qcom,ipc + +additionalProperties: false + +examples: + # The following example shows the SMP2P setup with the wireless processor, + # defined from the 8974 apps processor's point-of-view. It encompasses one + # inbound and one outbound entry. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smp2p"; + qcom,smem = <431>, <451>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smsm.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smsm.yaml new file mode 100644 index 000000000000..db67cf043256 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,smsm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory State Machine + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory State Machine facilitates broadcasting of single bit state + information between the processors in a Qualcomm SoC. Each processor is + assigned 32 bits of state that can be modified. A processor can through a + matrix of bitmaps signal subscription of notifications upon changes to a + certain bit owned by a certain remote processor. + +properties: + compatible: + const: qcom,smsm + + '#address-cells': + const: 1 + + qcom,local-host: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Identifier of the local processor in the list of hosts, or in other words + specifier of the column in the subscription matrix representing the local + processor. + + '#size-cells': + const: 0 + +patternProperties: + "^qcom,ipc-[1-4]$": + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the N:th + remote processor. + + "@[0-9a-f]$": + type: object + description: + Each processor's state bits are described by a subnode of the SMSM device + node. Nodes can either be flagged as an interrupt-controller to denote a + remote processor's state bits or the local processors bits. The node + names are not important. + + properties: + reg: + maxItems: 1 + + interrupt-controller: + description: + Marks the entry as a interrupt-controller and the state bits to + belong to a remote processor. + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + description: + One entry specifying remote IRQ used by the remote processor to + signal changes of its state bits. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for local entry. Denotes bit number. + + required: + - reg + + oneOf: + - required: + - '#qcom,smem-state-cells' + - required: + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + +anyOf: + - required: + - qcom,ipc-1 + - required: + - qcom,ipc-2 + - required: + - qcom,ipc-3 + - required: + - qcom,ipc-4 + +additionalProperties: false + +examples: + # The following example shows the SMEM setup for controlling properties of + # the wireless processor, defined from the 8974 apps processor's + # point-of-view. It encompasses one outbound entry and the outgoing interrupt + # for the wireless processor. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smsm"; + #address-cells = <1>; + #size-cells = <0>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,spm.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,spm.yaml new file mode 100644 index 000000000000..20c8cd38ff0d --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,spm.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Subsystem Power Manager + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + This binding describes the Qualcomm Subsystem Power Manager, used to control + the peripheral logic surrounding the application cores in Qualcomm platforms. + +properties: + compatible: + items: + - enum: + - qcom,sdm660-gold-saw2-v4.1-l2 + - qcom,sdm660-silver-saw2-v4.1-l2 + - qcom,msm8998-gold-saw2-v4.1-l2 + - qcom,msm8998-silver-saw2-v4.1-l2 + - qcom,msm8909-saw2-v3.0-cpu + - qcom,msm8916-saw2-v3.0-cpu + - qcom,msm8939-saw2-v3.0-cpu + - qcom,msm8226-saw2-v2.1-cpu + - qcom,msm8974-saw2-v2.1-cpu + - qcom,msm8976-gold-saw2-v2.3-l2 + - qcom,msm8976-silver-saw2-v2.3-l2 + - qcom,apq8084-saw2-v2.1-cpu + - qcom,apq8064-saw2-v1.1-cpu + - const: qcom,saw2 + + reg: + description: Base address and size of the SPM register region + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,kryo"; + device_type = "cpu"; + enable-method = "qcom,kpss-acc-v2"; + qcom,saw = <&saw0>; + reg = <0x0>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + saw0: power-manager@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>; + }; + + - | + + /* + * Example 2: New-gen multi cluster SoC using SAW only for L2; + * This does not require any cpuidle driver, nor any cpu phandle. + */ + power-manager@17812000 { + compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2"; + reg = <0x17812000 0x1000>; + }; + + power-manager@17912000 { + compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2"; + reg = <0x17912000 0x1000>; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml new file mode 100644 index 000000000000..74bb92e31554 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom,wcnss.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCNSS + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM + radio block, all using SMD as command channels. + +properties: + compatible: + const: qcom,wcnss + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + default: wlan/prima/WCNSS_qcom_wlan_nv.bin + description: + Relative firmware image path for the WLAN NV blob. + + qcom,mmio: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to a node specifying the wcnss "ccu" and "dxe" register blocks. + The node must be compatible with one of the following:: + - qcom,riva" + - qcom,pronto" + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string + const: WCNSS_CTRL + description: + Standard SMD property specifying the SMD channel used for communication + with the WiFi firmware. + + bluetooth: + type: object + additionalProperties: false + allOf: + - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml# + properties: + compatible: + const: qcom,wcnss-bt + + local-bd-address: true + + required: + - compatible + + wifi: + additionalProperties: false + type: object + properties: + compatible: + const: qcom,wcnss-wlan + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: tx + - const: rx + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: + Should reference the tx-enable and tx-rings-empty SMEM states. + + qcom,smem-state-names: + items: + - const: tx-enable + - const: tx-rings-empty + description: + Names of SMEM states. + + required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + +required: + - compatible + - qcom,mmio + - qcom,smd-channels + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/qcom/qcom-stats.yaml b/sys/contrib/device-tree/Bindings/soc/qcom/qcom-stats.yaml new file mode 100644 index 000000000000..96a7f1822022 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/qcom/qcom-stats.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) Stats + +maintainers: + - Maulik Shah <quic_mkshah@quicinc.com> + +description: + Always On Processor/Resource Power Manager maintains statistics of the SoC + sleep modes involving powering down of the rails and oscillator clock. + + Statistics includes SoC sleep mode type, number of times low power mode were + entered, time of last entry, time of last exit and accumulated sleep duration. + +properties: + compatible: + enum: + - qcom,rpmh-stats + - qcom,sdm845-rpmh-stats + - qcom,rpm-stats + # For older RPM firmware versions with fixed offset for the sleep stats + - qcom,apq8084-rpm-stats + - qcom,msm8226-rpm-stats + - qcom,msm8916-rpm-stats + - qcom,msm8974-rpm-stats + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Example of rpmh sleep stats + - | + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0c3f0000 0x400>; + }; + # Example of rpm sleep stats + - | + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x04690000 0x10000>; + }; +... diff --git a/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g011-sys.yaml b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g011-sys.yaml new file mode 100644 index 000000000000..1cac3cb5226c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,r9a09g011-sys.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g011-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M System Configuration (SYS) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/V2M-alike SYS (System Configuration) controls the overall + configuration of the LSI and supports the following functions, + - Bank address settings for DMAC + - Bank address settings of the units for ICB + - ETHER AxCACHE[1] (C bit) control function + - RAMA initialization control + - MD[7:0] pin monitoring + - LSI version + - PCIe related settings + - WDT stop control + - Temperature sensor (TSU) monitor + +properties: + compatible: + const: renesas,r9a09g011-sys + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sys: system-controller@a3f03000 { + compatible = "renesas,r9a09g011-sys"; + reg = <0xa3f03000 0x400>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml new file mode 100644 index 000000000000..398663d21ab1 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/{G2L,V2L} System Controller (SYSC) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of + the LSI and supports following functions, + - External terminal state capture function + - 34-bit address space access function + - Low power consumption control + - WDT stop control + +properties: + compatible: + enum: + - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five + - renesas,r9a07g044-sysc # RZ/G2{L,LC} + - renesas,r9a07g054-sysc # RZ/V2L + + reg: + maxItems: 1 + + interrupts: + items: + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt + - description: CA55 Software Standby Mode release request interrupt + - description: CM33 Software Standby Mode release request interrupt + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt + + interrupt-names: + items: + - const: lpm_int + - const: ca55stbydone_int + - const: cm33stbyr_int + - const: ca55_deny + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0x11020000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", + "ca55_deny"; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/renesas/renesas,rzv2m-pwc.yaml b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,rzv2m-pwc.yaml new file mode 100644 index 000000000000..12df33f58484 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/renesas/renesas,rzv2m-pwc.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,rzv2m-pwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M External Power Sequence Controller (PWC) + +description: |+ + The PWC IP found in the RZ/V2M family of chips comes with the below + capabilities + - external power supply on/off sequence generation + - on/off signal generation for the LPDDR4 core power supply (LPVDD) + - key input signals processing + - general-purpose output pins + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,r9a09g011-pwc # RZ/V2M + - renesas,r9a09g055-pwc # RZ/V2MA + - const: renesas,rzv2m-pwc + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + renesas,rzv2m-pwc-power: + description: The PWC is used to control the system power supplies. + type: boolean + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pwc: pwc@a3700000 { + compatible = "renesas,r9a09g011-pwc", "renesas,rzv2m-pwc"; + reg = <0xa3700000 0x800>; + gpio-controller; + #gpio-cells = <2>; + renesas,rzv2m-pwc-power; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml b/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml new file mode 100644 index 000000000000..53b95f348f8e --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/renesas/renesas.yaml @@ -0,0 +1,479 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas SH-Mobile, R-Mobile, and R-Car Platform + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Emma Mobile EV2 + items: + - enum: + - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual + - const: renesas,emev2 + + - description: RZ/A1H (R7S72100) + items: + - enum: + - renesas,genmai # Genmai (RTK772100BC00000BR) + - renesas,gr-peach # GR-Peach (X28A-M01-E/F) + - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE) + - const: renesas,r7s72100 + + - description: RZ/A2 (R7S9210) + items: + - enum: + - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE) + - const: renesas,r7s9210 + + - description: SH-Mobile AG5 (R8A73A00/SH73A0) + items: + - enum: + - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT + - const: renesas,sh73a0 + + - description: R-Mobile APE6 (R8A73A40) + items: + - enum: + - renesas,ape6evm + - const: renesas,r8a73a4 + + - description: R-Mobile A1 (R8A77400) + items: + - enum: + - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA + - const: renesas,r8a7740 + + - description: RZ/G1H (R8A77420) + items: + - enum: + # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven) + - iwave,g21m + - const: renesas,r8a7742 + + - items: + - enum: + # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven) + - iwave,g21d + - const: iwave,g21m + - const: renesas,r8a7742 + + - description: RZ/G1M (R8A77430) + items: + - enum: + # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7743 + + - items: + - enum: + # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE) + - const: renesas,r8a7743 + + - description: RZ/G1N (R8A77440) + items: + - enum: + # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7744 + + - items: + - enum: + # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - const: renesas,r8a7744 + + - description: RZ/G1E (R8A77450) + items: + - enum: + - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) + - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE) + - const: renesas,r8a7745 + + - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) + items: + - const: iwave,g22d + - const: iwave,g22m + - const: renesas,r8a7745 + + - description: RZ/G1C (R8A77470) + items: + - enum: + - iwave,g23s # iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) + - const: renesas,r8a77470 + + - description: RZ/G2M (R8A774A1) + items: + - enum: + - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform + - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit + - const: renesas,r8a774a1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2m + - const: renesas,r8a774a1 + + - description: RZ/G2N (R8A774B1) + items: + - enum: + - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit + - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform + - const: renesas,r8a774b1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2n + - const: renesas,r8a774b1 + + - description: RZ/G2E (R8A774C0) + items: + - enum: + - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874) + - const: renesas,r8a774c0 + + - items: + - enum: + - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875) + - const: si-linux,cat874 + - const: renesas,r8a774c0 + + - description: RZ/G2H (R8A774E1) + items: + - enum: + - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit + - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform + - const: renesas,r8a774e1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2h + - const: renesas,r8a774e1 + + - description: R-Car M1A (R8A77781) + items: + - enum: + - renesas,bockw + - const: renesas,r8a7778 + + - description: R-Car H1 (R8A77790) + items: + - enum: + - renesas,marzen # Marzen (R0P7779A00010S) + - const: renesas,r8a7779 + + - description: R-Car H2 (R8A77900) + items: + - enum: + - renesas,lager # Lager (RTP0RC7790SEB00010S) + - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) + - const: renesas,r8a7790 + + - description: R-Car M2-W (R8A77910) + items: + - enum: + - renesas,henninger + - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S) + - renesas,porter # Porter (M2-LCDP) + - const: renesas,r8a7791 + + - description: R-Car V2H (R8A77920) + items: + - enum: + - renesas,blanche # Blanche (RTP0RC7792SEB00010S) + - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE) + - const: renesas,r8a7792 + + - description: R-Car M2-N (R8A77930) + items: + - enum: + - renesas,gose # Gose (RTP0RC7793SEB00010S) + - const: renesas,r8a7793 + + - description: R-Car E2 (R8A77940) + items: + - enum: + - renesas,alt # Alt (RTP0RC7794SEB00010S) + - renesas,silk # SILK (RTP0RC7794LCB00011S) + - const: renesas,r8a7794 + + # Note: R-Car H3 ES1.* (R8A77950) is not supported upstream anymore! + + - description: R-Car H3 ES2.0 and later (R8A77951) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) + - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) + - const: renesas,r8a7795 + + - description: R-Car M3-W (R8A77960) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) + - const: renesas,r8a7796 + + - description: R-Car M3-W+ (R8A77961) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0)) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A) + - const: renesas,r8a77961 + + - description: Kingfisher (SBEV-RCAR-KF-M03) + oneOf: + - items: + - const: shimafuji,kingfisher + - enum: + - renesas,h3ulcb + - renesas,m3ulcb + - renesas,m3nulcb + - enum: + - renesas,r8a7795 + - renesas,r8a7796 + - renesas,r8a77961 + - renesas,r8a77965 + - items: + - const: shimafuji,kingfisher + - enum: + - renesas,h3ulcb + - renesas,m3ulcb + - renesas,m3nulcb + - enum: + - renesas,r8a779m0 + - renesas,r8a779m1 + - renesas,r8a779m2 + - renesas,r8a779m3 + - renesas,r8a779m4 + - renesas,r8a779m5 + - renesas,r8a779m8 + - renesas,r8a779mb + - enum: + - renesas,r8a7795 + - renesas,r8a77961 + - renesas,r8a77965 + + - description: R-Car M3-N (R8A77965) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N)) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S) + - const: renesas,r8a77965 + + - description: R-Car V3M (R8A77970) + items: + - enum: + - renesas,eagle # Eagle (RTP0RC77970SEB0010S) + - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10) + - const: renesas,r8a77970 + + - description: R-Car V3H (R8A77980) + items: + - enum: + - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01) + - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10) + - const: renesas,r8a77980 + + - description: R-Car V3H2 (R8A77980A) + items: + - enum: + - renesas,condor-i # Condor-I (RTP0RC77980SEBS012SA01) + - const: renesas,r8a77980a + - const: renesas,r8a77980 + + - description: R-Car E3 (R8A77990) + items: + - enum: + - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S) + - const: renesas,r8a77990 + + - description: R-Car D3 (R8A77995) + items: + - enum: + - renesas,draak # Draak (RTP0RC77995SEB0010S) + - const: renesas,r8a77995 + + - description: R-Car V3U (R8A779A0) + items: + - enum: + - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S) + - const: renesas,r8a779a0 + + - items: + - enum: + - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S) + - const: renesas,falcon-cpu + - const: renesas,r8a779a0 + + - description: R-Car S4-8 (R8A779F0) + items: + - enum: + - renesas,spider-cpu # Spider CPU board (RTP8A779F0ASKB0SC2S) + - const: renesas,r8a779f0 + + - items: + - enum: + - renesas,spider-breakout # Spider BreakOut board (RTP8A779F0ASKB0SB0S) + - const: renesas,spider-cpu + - const: renesas,r8a779f0 + + - description: R-Car V4H (R8A779G0) + items: + - enum: + - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) + - const: renesas,r8a779g0 + + - items: + - enum: + - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) + - const: renesas,white-hawk-cpu + - const: renesas,r8a779g0 + + - description: R-Car H3e (R8A779M0) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m0 + - const: renesas,r8a7795 + + - description: R-Car H3e-2G (R8A779M1) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m1 + - const: renesas,r8a7795 + + - description: R-Car M3e (R8A779M2) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m2 + - const: renesas,r8a77961 + + - description: R-Car M3e-2G (R8A779M3) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m3 + - const: renesas,r8a77961 + + - description: R-Car M3Ne (R8A779M4) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m4 + - const: renesas,r8a77965 + + - description: R-Car M3Ne-2G (R8A779M5) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m5 + - const: renesas,r8a77965 + + - description: R-Car E3e (R8A779M6) + items: + - enum: + - renesas,ebisu # Ebisu + - const: renesas,r8a779m6 + - const: renesas,r8a77990 + + - description: R-Car D3e (R8A779M7) + items: + - enum: + - renesas,draak # Draak + - const: renesas,r8a779m7 + - const: renesas,r8a77995 + + - description: R-Car H3Ne (R8A779M8) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m8 + - const: renesas,r8a7795 + + - description: R-Car H3Ne-1.7G (R8A779MB) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779mb + - const: renesas,r8a7795 + + - description: RZ/N1D (R9A06G032) + items: + - enum: + - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) + - const: renesas,r9a06g032 + + - description: RZ/N1{D,S} EB + items: + - enum: + - renesas,rzn1d400-eb # RZN1D-EB (Expansion Board when using a RZN1D-DB) + - const: renesas,rzn1d400-db + - const: renesas,r9a06g032 + + - description: RZ/Five and RZ/G2UL (R9A07G043) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g043f01 # RZ/Five + - renesas,r9a07g043u11 # RZ/G2UL Type-1 + - renesas,r9a07g043u12 # RZ/G2UL Type-2 + - const: renesas,r9a07g043 + + - description: RZ/G2{L,LC} (R9A07G044) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC + - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC + - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L + - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L + - const: renesas,r9a07g044 + + - description: RZ/V2L (R9A07G054) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L + - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L + - const: renesas,r9a07g054 + + - description: RZ/V2M (R9A09G011) + items: + - enum: + - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 + - const: renesas,r9a09g011 + +additionalProperties: true + +... diff --git a/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml b/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml new file mode 100644 index 000000000000..e4fa6a07b4fa --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/rockchip/grf.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip General Register Files (GRF) + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - rockchip,rk3288-sgrf + - rockchip,rk3566-pipe-grf + - rockchip,rk3568-pcie3-phy-grf + - rockchip,rk3568-pipe-grf + - rockchip,rk3568-pipe-phy-grf + - rockchip,rk3568-usb2phy-grf + - rockchip,rk3588-bigcore0-grf + - rockchip,rk3588-bigcore1-grf + - rockchip,rk3588-ioc + - rockchip,rk3588-php-grf + - rockchip,rk3588-pipe-phy-grf + - rockchip,rk3588-sys-grf + - rockchip,rk3588-pcie3-phy-grf + - rockchip,rk3588-pcie3-pipe-grf + - rockchip,rv1108-usbgrf + - const: syscon + - items: + - enum: + - rockchip,px30-grf + - rockchip,px30-pmugrf + - rockchip,px30-usb2phy-grf + - rockchip,rk3036-grf + - rockchip,rk3066-grf + - rockchip,rk3128-grf + - rockchip,rk3188-grf + - rockchip,rk3228-grf + - rockchip,rk3288-grf + - rockchip,rk3308-core-grf + - rockchip,rk3308-detect-grf + - rockchip,rk3308-grf + - rockchip,rk3308-usb2phy-grf + - rockchip,rk3328-grf + - rockchip,rk3328-usb2phy-grf + - rockchip,rk3368-grf + - rockchip,rk3368-pmugrf + - rockchip,rk3399-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3568-grf + - rockchip,rk3568-pmugrf + - rockchip,rk3588-usb2phy-grf + - rockchip,rv1108-grf + - rockchip,rv1108-pmugrf + - rockchip,rv1126-grf + - rockchip,rv1126-pmugrf + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +allOf: + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-grf + + then: + properties: + lvds: + type: object + + $ref: /schemas/display/rockchip/rockchip,lvds.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-grf + + then: + properties: + edp-phy: + type: object + $ref: /schemas/phy/rockchip,rk3288-dp-phy.yaml# + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3066-grf + - rockchip,rk3188-grf + - rockchip,rk3288-grf + + then: + properties: + usbphy: + type: object + + $ref: /schemas/phy/rockchip-usb-phy.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-grf + + then: + properties: + gpio: + type: object + + $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# + + unevaluatedProperties: false + + power-controller: + type: object + + $ref: /schemas/power/rockchip,power-controller.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-grf + + then: + properties: + mipi-dphy-rx0: + type: object + + $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml# + + unevaluatedProperties: false + + pcie-phy: + description: + Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt + + patternProperties: + "phy@[0-9a-f]+$": + description: + Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-pmugrf + - rockchip,rk3036-grf + - rockchip,rk3308-grf + - rockchip,rk3368-pmugrf + + then: + properties: + reboot-mode: + type: object + + $ref: /schemas/power/reset/syscon-reboot-mode.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-usb2phy-grf + - rockchip,rk3128-grf + - rockchip,rk3228-grf + - rockchip,rk3308-usb2phy-grf + - rockchip,rk3328-usb2phy-grf + - rockchip,rk3399-grf + - rockchip,rk3588-usb2phy-grf + - rockchip,rv1108-grf + + then: + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "usb2phy@[0-9a-f]+$": + type: object + + $ref: /schemas/phy/rockchip,inno-usb2phy.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-grf + - rockchip,px30-pmugrf + - rockchip,rk3188-grf + - rockchip,rk3228-grf + - rockchip,rk3288-grf + - rockchip,rk3328-grf + - rockchip,rk3368-grf + - rockchip,rk3368-pmugrf + - rockchip,rk3399-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3568-pmugrf + - rockchip,rv1108-grf + - rockchip,rv1108-pmugrf + + then: + properties: + io-domains: + type: object + + $ref: /schemas/power/rockchip-io-domain.yaml# + + unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3399-power.h> + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + reg = <0xff770000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + }; + + u2phy0: usb2phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy0_480m"; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-chipid.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-chipid.yaml new file mode 100644 index 000000000000..4bb8efb83ac1 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-chipid.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-chipid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series Chipid driver + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos4210-chipid + - samsung,exynos850-chipid + + reg: + maxItems: 1 + + samsung,asv-bin: + description: + Adaptive Supply Voltage bin selection. This can be used + to determine the ASV bin of an SoC if respective information + is missing in the CHIPID registers or in the OTP memory. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + samsung,asv-bin = <2>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml new file mode 100644 index 000000000000..e1d716df5dfa --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-pmu.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series Power Management Unit (PMU) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +# Custom select to avoid matching all nodes with 'syscon' +select: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5260-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - samsung,exynos7-pmu + - samsung,exynos850-pmu + - samsung-s5pv210-pmu + required: + - compatible + +properties: + compatible: + oneOf: + - items: + - enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5260-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - samsung,exynos7-pmu + - samsung,exynos850-pmu + - samsung-s5pv210-pmu + - const: syscon + - items: + - enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-names: + description: + List of clock names for particular CLKOUT mux inputs + minItems: 1 + maxItems: 32 + items: + pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$' + + clocks: + minItems: 1 + maxItems: 32 + + dp-phy: + $ref: /schemas/phy/samsung,dp-video-phy.yaml + unevaluatedProperties: false + + interrupt-controller: + description: + Some PMUs are capable of behaving as an interrupt controller (mostly + to wake up a suspended PMU). + + '#interrupt-cells': + description: + Must be identical to the that of the parent interrupt controller. + const: 3 + + mipi-phy: + $ref: /schemas/phy/samsung,mipi-video-phy.yaml + unevaluatedProperties: false + + reboot-mode: + $ref: /schemas/power/reset/syscon-reboot-mode.yaml + type: object + description: + Reboot mode to alter bootloader behavior for the next boot + + syscon-poweroff: + $ref: /schemas/power/reset/syscon-poweroff.yaml# + type: object + description: + Node for power off method + + syscon-reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + type: object + description: + Node for reboot method + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + then: + required: + - '#clock-cells' + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + then: + properties: + mipi-phy: true + else: + properties: + mipi-phy: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5250-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + then: + properties: + dp-phy: true + else: + properties: + dp-phy: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5250-pmu", "syscon"; + reg = <0x10040000 0x5000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + #clock-cells = <1>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + + dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml new file mode 100644 index 000000000000..a6836904a4f8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung's Exynos USI (Universal Serial Interface) + +maintainers: + - Sam Protsenko <semen.protsenko@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). + USI shares almost all internal circuits within each protocol, so only one + protocol can be chosen at a time. USI is modeled as a node with zero or more + child nodes, each representing a serial sub-node device. The mode setting + selects which particular function will be used. + +properties: + $nodename: + pattern: "^usi@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - const: samsung,exynosautov9-usi + - const: samsung,exynos850-usi + - enum: + - samsung,exynos850-usi + + reg: true + + clocks: true + + clock-names: true + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register syscon node + - description: offset of SW_CONF register for this USI controller + description: + Should be phandle/offset pair. The phandle to System Register syscon node + (for the same domain where this USI controller resides) and the offset + of SW_CONF register for this USI controller. + + samsung,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects USI function (which serial protocol to use). Refer to + <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values. + + samsung,clkreq-on: + type: boolean + description: + Enable this property if underlying protocol requires the clock to be + continuously provided without automatic gating. As suggested by SoC + manual, it should be set in case of SPI/I2C slave, UART Rx and I2C + multi-master mode. Usually this property is needed if USI mode is set + to "UART". + + This property is optional. + +patternProperties: + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/i2c-exynos5.yaml + description: Child node describing underlying I2C + + "^serial@[0-9a-f]+$": + $ref: /schemas/serial/samsung_uart.yaml + description: Child node describing underlying UART/serial + + "^spi@[0-9a-f]+$": + $ref: /schemas/spi/samsung,spi.yaml + description: Child node describing underlying SPI + +required: + - compatible + - ranges + - "#address-cells" + - "#size-cells" + - samsung,sysreg + - samsung,mode + +if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-usi + +then: + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI/I2C protocol + + clock-names: + items: + - const: pclk + - const: ipclk + + required: + - reg + - clocks + - clock-names + +else: + properties: + reg: false + clocks: false + clock-names: false + samsung,clkreq-on: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/samsung,exynos-usi.h> + + usi0: usi@138200c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138200c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1010>; + samsung,mode = <USI_V2_UART>; + samsung,clkreq-on; /* needed for UART mode */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "pclk", "ipclk"; + + serial_0: serial@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + hsi2c_0: i2c@13820000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peri 31>, <&cmu_peri 32>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml new file mode 100644 index 000000000000..163e912e9cad --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/samsung,exynos-sysreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series System Registers (SYSREG) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - samsung,exynos3-sysreg + - samsung,exynos4-sysreg + - samsung,exynos5-sysreg + - tesla,fsd-cam-sysreg + - tesla,fsd-fsys0-sysreg + - tesla,fsd-fsys1-sysreg + - tesla,fsd-peric-sysreg + - const: syscon + - items: + - enum: + - samsung,exynos5433-cam0-sysreg + - samsung,exynos5433-cam1-sysreg + - samsung,exynos5433-disp-sysreg + - samsung,exynos5433-fsys-sysreg + - const: samsung,exynos5433-sysreg + - const: syscon + - items: + - enum: + - samsung,exynos5433-sysreg + - samsung,exynos850-sysreg + - samsung,exynosautov9-sysreg + - const: syscon + deprecated: true + - items: + - enum: + - samsung,exynos850-cmgp-sysreg + - samsung,exynos850-peri-sysreg + - const: samsung,exynos850-sysreg + - const: syscon + - items: + - enum: + - samsung,exynosautov9-fsys2-sysreg + - samsung,exynosautov9-peric0-sysreg + - samsung,exynosautov9-peric1-sysreg + - const: samsung,exynosautov9-sysreg + - const: syscon + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-cmgp-sysreg + - samsung,exynos850-peri-sysreg + - samsung,exynos850-sysreg + then: + required: + - clocks + else: + properties: + clocks: false + +additionalProperties: false + +examples: + - | + system-controller@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-adamv.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-adamv.yaml new file mode 100644 index 000000000000..32d9cc2d72a8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-adamv.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier ADAMV block + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + ADAMV block implemented on Socionext UniPhier SoCs is an analog signal + amplifier that is a part of the external video and audio I/O system. + + This block is defined for controlling audio I/O reset only. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld11-adamv + - socionext,uniphier-ld20-adamv + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@57920000 { + compatible = "socionext,uniphier-ld20-adamv", + "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + reset-controller { + compatible = "socionext,uniphier-ld20-adamv-reset"; + #reset-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml new file mode 100644 index 000000000000..09f861cc068f --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-ahci-glue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC AHCI glue layer + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + AHCI glue layer implemented on Socionext UniPhier SoCs is a sideband + logic handling signals to AHCI host controller inside AHCI component. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-pro4-ahci-glue + - socionext,uniphier-pxs2-ahci-glue + - socionext,uniphier-pxs3-ahci-glue + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^reset-controller@[0-9a-f]+$": + $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml# + + "phy@[0-9a-f]+$": + $ref: /schemas/phy/socionext,uniphier-ahci-phy.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + reset-controller@0 { + compatible = "socionext,uniphier-pxs3-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml new file mode 100644 index 000000000000..bd0def7236b5 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC DWC3 USB3.0 glue layer + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is + a sideband logic handling signals to DWC3 host controller inside + USB3.0 component. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-pro4-dwc3-glue + - socionext,uniphier-pro5-dwc3-glue + - socionext,uniphier-pxs2-dwc3-glue + - socionext,uniphier-ld20-dwc3-glue + - socionext,uniphier-pxs3-dwc3-glue + - socionext,uniphier-nx1-dwc3-glue + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^reset-controller@[0-9a-f]+$": + $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml# + + "^regulator@[0-9a-f]+$": + $ref: /schemas/regulator/socionext,uniphier-regulator.yaml# + + "^phy@[0-9a-f]+$": + oneOf: + - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml# + - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + reset-controller@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + regulator@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + }; + + phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + }; + }; + diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-mioctrl.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-mioctrl.yaml new file mode 100644 index 000000000000..2cc38bb5038e --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-mioctrl.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-mioctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier media I/O block (MIO) controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + Media I/O block implemented on Socionext UniPhier SoCs is a legacy + integrated component of the stream type peripherals including USB2.0, + SD/eMMC, and MIO-DMAC. + Media I/O block has a common logic to control the component. + + Recent SoCs have SD interface logic specialized only for SD functions + as a subset of media I/O block. See socionext,uniphier-sdctrl.yaml. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-mioctrl + - socionext,uniphier-pro4-mioctrl + - socionext,uniphier-sld8-mioctrl + - socionext,uniphier-ld11-mioctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@5b3e0000 { + compatible = "socionext,uniphier-ld11-mioctrl", + "simple-mfd", "syscon"; + reg = <0x5b3e0000 0x800>; + + clock-controller { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld11-mio-reset"; + #reset-cells = <1>; + resets = <&sys_rst 7>; + }; + }; + diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-perictrl.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-perictrl.yaml new file mode 100644 index 000000000000..0adcffe859ab --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-perictrl.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-perictrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier peripheral block controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + Peripheral block implemented on Socionext UniPhier SoCs is an integrated + component of the peripherals including UART, I2C/FI2C, and SCSSI. + Peripheral block controller is a logic to control the component. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-perictrl + - socionext,uniphier-pro4-perictrl + - socionext,uniphier-pro5-perictrl + - socionext,uniphier-pxs2-perictrl + - socionext,uniphier-sld8-perictrl + - socionext,uniphier-ld11-perictrl + - socionext,uniphier-ld20-perictrl + - socionext,uniphier-pxs3-perictrl + - socionext,uniphier-nx1-perictrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@59820000 { + compatible = "socionext,uniphier-ld20-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + clock-controller { + compatible = "socionext,uniphier-ld20-peri-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld20-peri-reset"; + #reset-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-sdctrl.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-sdctrl.yaml new file mode 100644 index 000000000000..cb3b0d42739f --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-sdctrl.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sdctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SD interface logic + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + SD interface logic implemented on Socionext UniPhier SoCs is + attached outside SDHC, and has some SD related functions such as + clock control, reset control, mode switch, and so on. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-pro5-sdctrl + - socionext,uniphier-pxs2-sdctrl + - socionext,uniphier-ld11-sdctrl + - socionext,uniphier-ld20-sdctrl + - socionext,uniphier-pxs3-sdctrl + - socionext,uniphier-nx1-sdctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@59810000 { + compatible = "socionext,uniphier-ld20-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x400>; + + clock-controller { + compatible = "socionext,uniphier-ld20-sd-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld20-sd-reset"; + #reset-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml new file mode 100644 index 000000000000..1341544d1df5 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue-debug.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC-glue logic debug part + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + SoC-glue logic debug part implemented on Socionext UniPhier SoCs is + a collection of miscellaneous function registers handling signals outside + system components for debug and monitor use. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-soc-glue-debug + - socionext,uniphier-pro4-soc-glue-debug + - socionext,uniphier-pro5-soc-glue-debug + - socionext,uniphier-pxs2-soc-glue-debug + - socionext,uniphier-sld8-soc-glue-debug + - socionext,uniphier-ld11-soc-glue-debug + - socionext,uniphier-ld20-soc-glue-debug + - socionext,uniphier-pxs3-soc-glue-debug + - socionext,uniphier-nx1-soc-glue-debug + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^efuse@[0-9a-f]+$": + $ref: /schemas/nvmem/socionext,uniphier-efuse.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@5f900000 { + compatible = "socionext,uniphier-pxs2-soc-glue-debug", + "simple-mfd", "syscon"; + reg = <0x5f900000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-soc-glue.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-soc-glue.yaml new file mode 100644 index 000000000000..7845dcfca986 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-soc-glue.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC-glue logic + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + SoC-glue logic implemented on Socionext UniPhier SoCs is a collection of + miscellaneous function registers handling signals outside system components. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-soc-glue + - socionext,uniphier-pro4-soc-glue + - socionext,uniphier-pro5-soc-glue + - socionext,uniphier-pxs2-soc-glue + - socionext,uniphier-sld8-soc-glue + - socionext,uniphier-ld11-soc-glue + - socionext,uniphier-ld20-soc-glue + - socionext,uniphier-pxs3-soc-glue + - socionext,uniphier-nx1-soc-glue + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/socionext,uniphier-pinctrl.yaml# + + usb-hub: + $ref: /schemas/phy/socionext,uniphier-usb2-phy.yaml# + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-soc-glue + - socionext,uniphier-ld11-soc-glue + then: + properties: + usb-hub: false + + - if: + not: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-soc-glue + then: + properties: + clock-controller: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + + usb-hub { + compatible = "socionext,uniphier-pro4-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + + phy@3 { + reg = <3>; + #phy-cells = <0>; + }; + }; + + clock-controller { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-sysctrl.yaml b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-sysctrl.yaml new file mode 100644 index 000000000000..3acb14201d1a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/socionext/socionext,uniphier-sysctrl.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier system controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + System controller implemented on Socionext UniPhier SoCs has multiple + functions such as clock control, reset control, internal watchdog timer, + thermal management, and so on. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-sysctrl + - socionext,uniphier-pro4-sysctrl + - socionext,uniphier-pro5-sysctrl + - socionext,uniphier-pxs2-sysctrl + - socionext,uniphier-sld8-sysctrl + - socionext,uniphier-ld11-sysctrl + - socionext,uniphier-ld20-sysctrl + - socionext,uniphier-pxs3-sysctrl + - socionext,uniphier-nx1-sysctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + + watchdog: + $ref: /schemas/watchdog/socionext,uniphier-wdt.yaml# + + thermal-sensor: + $ref: /schemas/thermal/socionext,uniphier-thermal.yaml# + +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-ld4-sysctrl + then: + properties: + watchdog: false + + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-ld4-sysctrl + - socionext,uniphier-pro4-sysctrl + - socionext,uniphier-sld8-sysctrl + - socionext,uniphier-ld11-sysctrl + then: + properties: + thermal-sensor: false + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + syscon@61840000 { + compatible = "socionext,uniphier-ld20-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + clock-controller { + compatible = "socionext,uniphier-ld20-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld20-reset"; + #reset-cells = <1>; + }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + + thermal-sensor { + compatible = "socionext,uniphier-ld20-thermal"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/ti/k3-ringacc.yaml b/sys/contrib/device-tree/Bindings/soc/ti/k3-ringacc.yaml index ddea3d41971d..22cf9002fee7 100644 --- a/sys/contrib/device-tree/Bindings/soc/ti/k3-ringacc.yaml +++ b/sys/contrib/device-tree/Bindings/soc/ti/k3-ringacc.yaml @@ -25,6 +25,9 @@ description: | The Ring Accelerator is a hardware module that is responsible for accelerating management of the packet queues. The K3 SoCs can have more than one RA instances +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + properties: compatible: items: @@ -54,14 +57,6 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: TI-SCI RM subtype for GP ring range - ti,sci: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: phandle on TI-SCI compatible System controller node - - ti,sci-dev-id: - $ref: /schemas/types.yaml#/definitions/uint32 - description: TI-SCI device id of the ring accelerator - required: - compatible - reg @@ -72,7 +67,7 @@ required: - ti,sci - ti,sci-dev-id -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/soc/ti/sci-pm-domain.yaml b/sys/contrib/device-tree/Bindings/soc/ti/sci-pm-domain.yaml new file mode 100644 index 000000000000..5df7688a1e1c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/ti/sci-pm-domain.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI generic power domain + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: /schemas/power/power-domain.yaml# + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This PM domain node represents the global PM domain managed by the TI-SCI + controller. Since this relies on the TI SCI protocol to communicate with + the TI-SCI controller, it must be a child of the TI-SCI controller node. + +properties: + compatible: + const: ti,sci-pm-domain + + "#power-domain-cells": + enum: [1, 2] + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell, if cell-value is 2, should be one of the following + TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled + or + TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts. + Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + - | + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; diff --git a/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml b/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml index dbc62821c60b..c402cb2928e8 100644 --- a/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml +++ b/sys/contrib/device-tree/Bindings/soc/ti/ti,pruss.yaml @@ -65,9 +65,11 @@ properties: - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0 - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1 - ti,am5728-pruss # for AM57xx SoC family - - ti,k2g-pruss # for 66AK2G SoC family + - ti,am625-pruss # for K3 AM62x SoC family + - ti,am642-icssg # for K3 AM64x SoC family - ti,am654-icssg # for K3 AM65x SoC family - ti,j721e-icssg # for K3 J721E SoC family + - ti,k2g-pruss # for 66AK2G SoC family reg: maxItems: 1 @@ -84,6 +86,8 @@ properties: dma-ranges: maxItems: 1 + dma-coherent: true + power-domains: description: | This property is as per sci-pm-domain.txt. @@ -100,7 +104,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1. @@ -111,7 +114,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1 @@ -128,6 +130,7 @@ patternProperties: PRU-ICSS configuration space. CFG sub-module represented as a SysCon. type: object + additionalProperties: false properties: compatible: @@ -233,8 +236,8 @@ patternProperties: description: | Industrial Ethernet Peripheral to manage/generate Industrial Ethernet functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x, - AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x & J721E SoCs ). IEP - is used for creating PTP clocks and generating PPS signals. + AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x, J721E & AM64x SoCs). + IEP is used for creating PTP clocks and generating PPS signals. type: object @@ -280,10 +283,7 @@ patternProperties: PRUSS INTC Node. Each PRUSS has a single interrupt controller instance that is common to all the PRU cores. This should be represented as an interrupt-controller node. - - allOf: - - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# - + $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# type: object mdio@[a-f0-9]+$: @@ -291,10 +291,7 @@ patternProperties: MDIO Node. Each PRUSS has an MDIO module that can be used to control external PHYs. The MDIO module used within the PRU-ICSS is an instance of the MDIO Controller used in TI Davinci SoCs. - - allOf: - - $ref: /schemas/net/ti,davinci-mdio.yaml# - + $ref: /schemas/net/ti,davinci-mdio.yaml# type: object "^(pru|rtu|txpru)@[0-9a-f]+$": @@ -304,10 +301,7 @@ patternProperties: inactive by using the standard DT string property, "status". The ICSSG IP present on K3 SoCs have additional auxiliary PRU cores with slightly different IP integration. - - allOf: - - $ref: /schemas/remoteproc/ti,pru-rproc.yaml# - + $ref: /schemas/remoteproc/ti,pru-rproc.yaml# type: object required: @@ -320,22 +314,34 @@ additionalProperties: false # Due to inability of correctly verifying sub-nodes with an @address through # the "required" list, the required sub-nodes below are commented out for now. -#required: +# required: # - memories # - interrupt-controller # - pru -if: - properties: - compatible: - contains: - enum: - - ti,k2g-pruss - - ti,am654-icssg - - ti,j721e-icssg -then: - required: - - power-domains +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + - ti,am654-icssg + - ti,j721e-icssg + - ti,am642-icssg + then: + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + then: + required: + - dma-coherent examples: - | diff --git a/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml b/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml new file mode 100644 index 000000000000..0df41c4f60c1 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/soc/ti/wkup-m3-ipc.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wakeup M3 IPC device + +maintainers: + - Dave Gerlach <d-gerlach@ti.com> + - Drew Fustini <dfustini@baylibre.com> + +description: |+ + The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor + (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks + that cannot be controlled from the MPU, like suspend/resume and certain deep + C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver + to boot the wkup_m3, it handles communication with the CM3 using IPC registers + present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an + API to allow the SoC PM code to execute specific PM tasks. + + Wkup M3 Device Node + ==================== + A wkup_m3_ipc device node is used to represent the IPC registers within an + SoC. + + Support for VTT Toggle with GPIO pin + ==================================== + On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is + connected to the enable pin on the DDR VTT regulator. This allows the + regulator to be disabled upon suspend and enabled upon resume. Please note + that the GPIO pin must be part of the GPIO0 module as only this GPIO module + is in the wakeup power domain. + + Support for IO Isolation + ======================== + On AM437x SoCs, certain pins can be forced into an alternate state when IO + isolation is activated. Those pins have pad control registers prefixed by + 'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can + override the pin's existing bias (pull-up/pull-down) and value (high/low) when + IO isolation is active. + + Support for I2C PMIC Voltage Scaling + ==================================== + It is possible to pass the name of a binary file to load into the CM3 memory. + The binary data is the I2C sequences for the CM3 to send out to the PMIC + during low power mode entry. + +properties: + compatible: + enum: + - ti,am3352-wkup-m3-ipc # for AM33xx SoCs + - ti,am4372-wkup-m3-ipc # for AM43xx SoCs + + reg: + description: + The IPC register address space to communicate with the Wakeup M3 processor + maxItems: 1 + + interrupts: + description: wkup_m3 interrupt that signals the MPU + maxItems: 1 + + ti,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the wkup_m3 rproc node so the IPC driver can boot it + + mboxes: + description: + phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + maxItems: 1 + + firmware-name: + description: + Name of binary file with I2C sequences for PMIC voltage scaling + + ti,vtt-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: GPIO pin connected to enable pin on VTT regulator + + ti,set-io-isolation: + type: boolean + description: + If this property is present, then the wkup_m3_ipc driver will instruct + the CM3 firmware to activate IO isolation when suspending to deep sleep. + This can be leveraged by a board design to put other devices on the board + into a low power state. + +allOf: + - if: + properties: + compatible: + not: + contains: + const: ti,am4372-wkup-m3-ipc + then: + properties: + ti,set-io-isolation: false + +required: + - compatible + - reg + - interrupts + - ti,rproc + - mboxes + +additionalProperties: false + +examples: + - | + /* Example for AM335x SoC */ + soc { + #address-cells = <1>; + #size-cells = <1>; + + am335x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; + }; + }; + + - | + /* + * Example for AM473x SoC: + * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT + * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7 + * for pull-up during normal system operation. However, the DS0 (deep sleep) + * state of the pin is configured for pull-down and thus the VTT regulator + * will be disabled to save power when IO isolation is active. Note that + * this method is an alternative to using the 'ti,vtt-gpio-pin' property. + */ + #include <dt-bindings/pinctrl/am43xx.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + + am437x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&ddr3_vtt_toggle_default>; + + ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + pinctrl-single,pins = < + 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) + >; + }; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; + }; + }; + +... |