diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/sound')
105 files changed, 3355 insertions, 288 deletions
diff --git a/sys/contrib/device-tree/Bindings/sound/adi,adau1373.yaml b/sys/contrib/device-tree/Bindings/sound/adi,adau1373.yaml new file mode 100644 index 000000000000..97552bf5d951 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/adi,adau1373.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau1373.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADAU1373 CODEC + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices ADAU1373 Low power codec with speaker and headphone amplifiers. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1373.pdf + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,adau1373 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + powerdown-gpios: + description: GPIO used for hardware power-down. + maxItems: 1 + + adi,micbias1-microvolt: + description: + This property sets the microphone bias voltage for the first microphone. + enum: [1800000, 2200000, 2600000, 2900000] + default: 2900000 + + adi,micbias2-microvolt: + description: + This property sets the microphone bias voltage for the second microphone. + enum: [1800000, 2200000, 2600000, 2900000] + default: 2900000 + + adi,input1-differential: + description: This property sets the first analog input as differential. + type: boolean + + adi,input2-differential: + description: This property sets the second analog input as differential. + type: boolean + + adi,input3-differential: + description: This property sets the third analog input as differential. + type: boolean + + adi,input4-differential: + description: This property sets the fourth analog input as differential. + type: boolean + + adi,lineout-differential: + description: This property sets the line output as differential. + type: boolean + + adi,lineout-gnd-sense: + description: This property enables the line output ground sense control. + type: boolean + + adi,drc-settings: + description: + This setting is used to control the dynamic range of the signal. The + device provides a maximum of three full band DRCs with 13 entries each. + $ref: /schemas/types.yaml#/definitions/uint8-array + oneOf: + - minItems: 13 + maxItems: 13 + - minItems: 26 + maxItems: 26 + - minItems: 39 + maxItems: 39 + +required: + - "#sound-dai-cells" + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@1a { + compatible = "adi,adau1373"; + reg = <0x1a>; + #sound-dai-cells = <0>; + powerdown-gpios = <&gpio 100 GPIO_ACTIVE_LOW>; + adi,input2-differential; + adi,input1-differential; + adi,lineout-differential; + adi,micbias2-microvolt = <1800000>; + adi,drc-settings = /bits/ 8 < + 0xff 0xff 0x1 0x2 0xa 0xa 0xd 0x1 0xff 0xff 0x5 0xd 0xff + >; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/sound/adi,ssm2518.yaml b/sys/contrib/device-tree/Bindings/sound/adi,ssm2518.yaml index f3f32540779c..f1beae84cad1 100644 --- a/sys/contrib/device-tree/Bindings/sound/adi,ssm2518.yaml +++ b/sys/contrib/device-tree/Bindings/sound/adi,ssm2518.yaml @@ -36,12 +36,14 @@ unevaluatedProperties: false examples: - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@34 { - compatible = "adi,ssm2518"; - reg = <0x34>; - gpios = <&gpio 5 0>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/allwinner,sun4i-a10-codec.yaml b/sys/contrib/device-tree/Bindings/sound/allwinner,sun4i-a10-codec.yaml index 78273647f766..b4eca702febc 100644 --- a/sys/contrib/device-tree/Bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/sys/contrib/device-tree/Bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -22,6 +22,8 @@ properties: - allwinner,sun8i-a23-codec - allwinner,sun8i-h3-codec - allwinner,sun8i-v3s-codec + - allwinner,sun50i-h616-codec + - allwinner,suniv-f1c100s-codec reg: maxItems: 1 @@ -40,14 +42,20 @@ properties: - const: codec dmas: - items: - - description: RX DMA Channel - - description: TX DMA Channel + oneOf: + - items: + - description: RX DMA Channel + - description: TX DMA Channel + - items: + - description: TX DMA Channel dma-names: - items: - - const: rx - - const: tx + oneOf: + - items: + - const: rx + - const: tx + - items: + - const: tx resets: maxItems: 1 @@ -70,6 +78,7 @@ properties: - MIC1 - MIC2 - MIC3 + - MIC # Microphone Biases from the SoC - HBIAS @@ -80,6 +89,8 @@ properties: - Headset Mic - Line In - Line Out + - Right FM In + - Left FM In - Mic - Speaker @@ -91,6 +102,10 @@ properties: maxItems: 1 description: GPIO to enable the external amplifier + hp-det-gpios: + maxItems: 1 + description: GPIO for headphone/line-out detection + required: - "#sound-dai-cells" - compatible @@ -229,6 +244,69 @@ allOf: - Mic - Speaker + - if: + properties: + compatible: + enum: + - allwinner,sun50i-h616-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - Headphone + - LINEOUT + - Line Out + - Speaker + + dmas: + items: + - description: TX DMA Channel + + dma-names: + items: + - const: tx + + else: + properties: + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + - if: + properties: + compatible: + enum: + - allwinner,suniv-f1c100s-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC + - HBIAS + - MBIAS + - Headphone + - Headset Mic + - Line In + - Line Out + - Right FM In + - Left FM In + - Mic + - Speaker + unevaluatedProperties: false examples: diff --git a/sys/contrib/device-tree/Bindings/sound/atmel,at91-ssc.yaml b/sys/contrib/device-tree/Bindings/sound/atmel,at91-ssc.yaml new file mode 100644 index 000000000000..ce99c2d8c35d --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/atmel,at91-ssc.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91-ssc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Serial Synchronous Serial (SSC) + +maintainers: + - Andrei Simion <andrei.simion@microchip.com> + +description: + The Atmel Synchronous Serial Controller (SSC) provides a versatile + synchronous communication link for audio and telecom applications, + supporting protocols like I2S, Short Frame Sync, and Long Frame Sync. + +properties: + compatible: + oneOf: + - enum: + - atmel,at91rm9200-ssc + - atmel,at91sam9g45-ssc + - items: + - enum: + - microchip,sam9x7-ssc + - const: atmel,at91sam9g45-ssc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + atmel,clk-from-rk-pin: + description: + Specify the clock source for the SSC (Synchronous Serial Controller) + when operating in slave mode. By default, the clock is sourced from + the TK pin. + type: boolean + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - atmel,at91sam9g45-ssc + then: + required: + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + ssc@100000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0x100000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + #sound-dai-cells = <0>; + }; + + ssc@c00000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xc00000 0x4000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "pclk"; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/sys/contrib/device-tree/Bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..627da2d890b2 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s@microchip.com> + +description: + The audio complex configuration for Atmel at91sam9g20ek with WM8731 audio codec. + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + maxItems: 4 + items: + enum: + # Board Connectors + - Ext Spk + - Int Mic + + # CODEC Pins + - LOUT + - ROUT + - LHPOUT + - RHPOUT + - LLINEIN + - RLINEIN + - MICIN + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec. + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int Mic", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/audio-graph-card2.yaml b/sys/contrib/device-tree/Bindings/sound/audio-graph-card2.yaml index f943f90d8b15..40eb1d7d6cf1 100644 --- a/sys/contrib/device-tree/Bindings/sound/audio-graph-card2.yaml +++ b/sys/contrib/device-tree/Bindings/sound/audio-graph-card2.yaml @@ -18,11 +18,7 @@ properties: label: maxItems: 1 routing: - description: | - A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's source. - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: audio-graph.yaml#/properties/routing aux-devs: description: | List of phandles pointing to auxiliary devices, such @@ -37,6 +33,12 @@ properties: codec2codec: type: object description: Codec to Codec node + hp-det-gpios: + $ref: audio-graph.yaml#/properties/hp-det-gpios + mic-det-gpios: + $ref: audio-graph.yaml#/properties/mic-det-gpios + widgets: + $ref: audio-graph.yaml#/properties/widgets required: - compatible diff --git a/sys/contrib/device-tree/Bindings/sound/audio-graph.yaml b/sys/contrib/device-tree/Bindings/sound/audio-graph.yaml index 71f52f7e55f6..9899d9d1958d 100644 --- a/sys/contrib/device-tree/Bindings/sound/audio-graph.yaml +++ b/sys/contrib/device-tree/Bindings/sound/audio-graph.yaml @@ -37,8 +37,14 @@ properties: pa-gpios: maxItems: 1 hp-det-gpio: + deprecated: true + maxItems: 1 + hp-det-gpios: maxItems: 1 mic-det-gpio: + deprecated: true + maxItems: 1 + mic-det-gpios: maxItems: 1 required: diff --git a/sys/contrib/device-tree/Bindings/sound/awinic,aw88395.yaml b/sys/contrib/device-tree/Bindings/sound/awinic,aw88395.yaml index ac5f2e0f42cb..bb92d6ca3144 100644 --- a/sys/contrib/device-tree/Bindings/sound/awinic,aw88395.yaml +++ b/sys/contrib/device-tree/Bindings/sound/awinic,aw88395.yaml @@ -17,8 +17,11 @@ description: properties: compatible: enum: - - awinic,aw88395 + - awinic,aw88081 + - awinic,aw88083 + - awinic,aw88166 - awinic,aw88261 + - awinic,aw88395 - awinic,aw88399 reg: @@ -56,6 +59,8 @@ allOf: compatible: contains: enum: + - awinic,aw88081 + - awinic,aw88083 - awinic,aw88261 then: properties: diff --git a/sys/contrib/device-tree/Bindings/sound/cirrus,cs42l84.yaml b/sys/contrib/device-tree/Bindings/sound/cirrus,cs42l84.yaml new file mode 100644 index 000000000000..7f8338e8ae36 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/cirrus,cs42l84.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42l84.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42L84 audio CODEC + +maintainers: + - Martin PoviÅ¡er <povik+lin@cutebit.org> + +description: | + The CS42L84 is a headphone jack codec made by Cirrus Logic and embedded + in personal computers sold by Apple. It was first seen in 2021 Macbook + Pro models. It has stereo DAC for playback, mono ADC for capture, and + is somewhat similar to CS42L42 but with a different regmap. + +properties: + compatible: + enum: + - cirrus,cs42l84 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + jack_codec: codec@4b { + compatible = "cirrus,cs42l84"; + reg = <0x4b>; + reset-gpios = <&pinctrl_nub 4 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 180 IRQ_TYPE_LEVEL_LOW>; + #sound-dai-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/cirrus,cs42xx8.yaml b/sys/contrib/device-tree/Bindings/sound/cirrus,cs42xx8.yaml index 725b47e82062..cd47905eb20a 100644 --- a/sys/contrib/device-tree/Bindings/sound/cirrus,cs42xx8.yaml +++ b/sys/contrib/device-tree/Bindings/sound/cirrus,cs42xx8.yaml @@ -41,6 +41,10 @@ properties: description: This pin is connected to the chip's RESET pin. maxItems: 1 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg diff --git a/sys/contrib/device-tree/Bindings/sound/cirrus,cs48l32.yaml b/sys/contrib/device-tree/Bindings/sound/cirrus,cs48l32.yaml new file mode 100644 index 000000000000..bf087b57aaf6 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/cirrus,cs48l32.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs48l32.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS48L32 audio DSP. + +maintainers: + - patches@opensource.cirrus.com + +description: | + The CS48L32 is a high-performance low-power audio DSP for smartphones and + other portable audio devices. The CS48L32 combines a programmable Halo Core + DSP with a variety of power-efficient fixed-function audio processors. + + See also the binding headers: + + include/dt-bindings/sound/cs48l32.yaml + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - cirrus,cs48l32 + + reg: + description: SPI chip-select number. + maxItems: 1 + + spi-max-frequency: + maximum: 25000000 + + vdd-a-supply: + description: Regulator supplying VDD_A + + vdd-d-supply: + description: Regulator supplying VDD_D + + vdd-io-supply: + description: Regulator supplying VDD_IO + + vdd-cp-supply: + description: Regulator supplying VDD_CP + + reset-gpios: + description: + One entry specifying the GPIO controlling /RESET. Although optional, + it is strongly recommended to use a hardware reset. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The clock supplied on MCLK1 + + clock-names: + const: mclk1 + + '#sound-dai-cells': + const: 1 + + cirrus,in-type: + description: | + A list of input type settings for each ADC input. + Inputs are one of these types: + CS48L32_IN_TYPE_DIFF : analog differential (default) + CS48L32_IN_TYPE_SE : analog single-ended + + The type of the left (L) and right (R) channel on each input is + independently configured, as are the two groups of pins muxable to + the input (referred to in the datasheet as "1" and "2"). + + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: + IN1L_1 analog input type. One of the CS48L32_IN_TYPE_xxx. + minimum: 0 + maximum: 1 + default: 0 + - description: + IN1R_1 analog input type. One of the CS48L32_IN_TYPE_xxx. + minimum: 0 + maximum: 1 + default: 0 + - description: + IN1L_2 analog input type. One of the CS48L32_IN_TYPE_xxx. + minimum: 0 + maximum: 1 + default: 0 + - description: + IN1R_2 analog input type. One of the CS48L32_IN_TYPE_xxx. + minimum: 0 + maximum: 1 + default: 0 + + cirrus,pdm-sup: + description: | + Indicate which MICBIAS output supplies bias to the microphone. + There is one cell per input (IN1, IN2, ...). + + One of the CS48L32_MICBIAS_xxx values. + CS48L32_PDM_SUP_VOUT_MIC : mic biased from VOUT_MIC + CS48L32_PDM_SUP_MICBIAS1 : mic biased from MICBIAS1 + + Also see the INn_PDM_SUP field in the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: IN1 PDM supply source + minimum: 0 + maximum: 1 + default: 0 + - description: IN2 PDM supply source + minimum: 0 + maximum: 1 + default: 0 + +required: + - compatible + - reg + - vdd-a-supply + - vdd-d-supply + - vdd-io-supply + - vdd-cp-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/cs48l32.h> + + spi@e0006000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0006000 0x1000>; + + codec@1 { + compatible = "cirrus,cs48l32"; + + reg = <0x1>; + spi-max-frequency = <2500000>; + + vdd-a-supply = <®ulator_1v8>; + vdd-d-supply = <®ulator_1v2>; + vdd-io-supply = <®ulator_1v8>; + vdd-cp-supply = <®ulator_1v8>; + + reset-gpios = <&gpio 0 0>; + + clocks = <&clks 0>; + clock-names = "mclk1"; + + interrupt-parent = <&gpio0>; + interrupts = <56 8>; + + #sound-dai-cells = <1>; + + cirrus,in-type = < + CS48L32_IN_TYPE_DIFF CS48L32_IN_TYPE_DIFF + CS48L32_IN_TYPE_SE CS48L32_IN_TYPE_SE + >; + + cirrus,pdm-sup = < + CS48L32_PDM_SUP_MICBIAS1 CS48L32_PDM_SUP_MICBIAS1 + >; + }; + }; + +# +# Minimal config +# + - | + #include <dt-bindings/sound/cs48l32.h> + + spi@e0006000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0006000 0x1000>; + + codec@1 { + compatible = "cirrus,cs48l32"; + + reg = <0x1>; + + vdd-a-supply = <®ulator_1v8>; + vdd-d-supply = <®ulator_1v2>; + vdd-io-supply = <®ulator_1v8>; + vdd-cp-supply = <®ulator_1v8>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/dmic-codec.yaml b/sys/contrib/device-tree/Bindings/sound/dmic-codec.yaml index 59ef0cf6b6e5..cc3c84dd4c26 100644 --- a/sys/contrib/device-tree/Bindings/sound/dmic-codec.yaml +++ b/sys/contrib/device-tree/Bindings/sound/dmic-codec.yaml @@ -19,6 +19,9 @@ properties: '#sound-dai-cells': const: 0 + vref-supply: + description: Phandle to the digital microphone reference supply + dmicen-gpios: description: GPIO specifier for DMIC to control start and stop maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es71x4.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es71x4.yaml index fd1b32812228..efe9f3fd3778 100644 --- a/sys/contrib/device-tree/Bindings/sound/everest,es71x4.yaml +++ b/sys/contrib/device-tree/Bindings/sound/everest,es71x4.yaml @@ -53,10 +53,10 @@ unevaluatedProperties: false examples: - | - codec { - compatible = "everest,es7134"; - #sound-dai-cells = <0>; - VDD-supply = <&vdd_supply>; - }; + codec { + compatible = "everest,es7134"; + #sound-dai-cells = <0>; + VDD-supply = <&vdd_supply>; + }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es7241.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es7241.yaml index f179af758730..e5cfb40f1ef2 100644 --- a/sys/contrib/device-tree/Bindings/sound/everest,es7241.yaml +++ b/sys/contrib/device-tree/Bindings/sound/everest,es7241.yaml @@ -54,14 +54,15 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - codec { - compatible = "everest,es7241"; - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - VDDP-supply = <&vddp_supply>; - VDDA-supply = <&vdda_supply>; - VDDD-supply = <&vddd_supply>; - }; + #include <dt-bindings/gpio/gpio.h> + + codec { + compatible = "everest,es7241"; + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + VDDP-supply = <&vddp_supply>; + VDDA-supply = <&vdda_supply>; + VDDD-supply = <&vddd_supply>; + }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es8316.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es8316.yaml index 214f135b7777..e4b2eb5fae2f 100644 --- a/sys/contrib/device-tree/Bindings/sound/everest,es8316.yaml +++ b/sys/contrib/device-tree/Bindings/sound/everest,es8316.yaml @@ -4,12 +4,13 @@ $id: http://devicetree.org/schemas/sound/everest,es8316.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Everest ES8311 and ES8316 audio CODECs +title: Everest ES8311, ES8316 and ES8323 audio CODECs maintainers: - Daniel Drake <drake@endlessm.com> - Katsuhiro Suzuki <katsuhiro@katsuster.net> - Matteo Martelli <matteomartelli3@gmail.com> + - Binbin Zhou <zhoubinbin@loongson.cn> allOf: - $ref: dai-common.yaml# @@ -19,6 +20,7 @@ properties: enum: - everest,es8311 - everest,es8316 + - everest,es8323 reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es8326.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es8326.yaml index d51431df7acf..b5594a9d508e 100644 --- a/sys/contrib/device-tree/Bindings/sound/everest,es8326.yaml +++ b/sys/contrib/device-tree/Bindings/sound/everest,es8326.yaml @@ -24,6 +24,10 @@ properties: items: - const: mclk + interrupts: + maxItems: 1 + description: interrupt output for headset detection + "#sound-dai-cells": const: 0 diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es8328.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es8328.yaml index a0f4670fa38c..ddddd7b143ab 100644 --- a/sys/contrib/device-tree/Bindings/sound/everest,es8328.yaml +++ b/sys/contrib/device-tree/Bindings/sound/everest,es8328.yaml @@ -24,9 +24,13 @@ maintainers: properties: compatible: - enum: - - everest,es8328 - - everest,es8388 + oneOf: + - enum: + - everest,es8328 + - items: + - enum: + - everest,es8388 + - const: everest,es8328 reg: maxItems: 1 @@ -50,8 +54,13 @@ properties: HPVDD-supply: description: Regulator providing analog output voltage 3.3V + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible + - reg - clocks - DVDD-supply - AVDD-supply diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es8375.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es8375.yaml new file mode 100644 index 000000000000..4a3d671c66b1 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/everest,es8375.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es8375.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES8375 audio CODEC + +maintainers: + - Michael Zhang <zhangyi@everest-semi.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: everest,es8375 + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for master clock (MCLK) + + clock-names: + items: + - const: mclk + + vdda-supply: + description: + Analogue power supply. + + vddd-supply: + description: + Interface power supply. + + everest,mclk-src: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Represents the MCLK/SCLK pair pins used as the internal clock. + 0 represents selecting MCLK. + 1 represents selecting SCLK. + enum: [0, 1] + default: 0 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - "#sound-dai-cells" + - vdda-supply + - vddd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + es8375: codec@18 { + compatible = "everest,es8375"; + reg = <0x18>; + vdda-supply = <&vdd3v3>; + vddd-supply = <&vdd3v3>; + #sound-dai-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/everest,es8389.yaml b/sys/contrib/device-tree/Bindings/sound/everest,es8389.yaml new file mode 100644 index 000000000000..a673df485ab3 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/everest,es8389.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es8389.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES8389 audio CODEC + +maintainers: + - Michael Zhang <zhangyi@everest-semi.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: everest,es8389 + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for master clock (MCLK) + + clock-names: + items: + - const: mclk + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + es8389: codec@10 { + compatible = "everest,es8389"; + reg = <0x10>; + #sound-dai-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,audmix.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,audmix.yaml index 9413b901cf77..3ad197b3c82c 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,audmix.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,audmix.yaml @@ -61,13 +61,26 @@ properties: - description: serial audio input 2 maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + patternProperties: + '^port@[0-1]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: Input port from SAI TX + + properties: + port@2: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: Output port to SAI RX + required: - compatible - reg - clocks - clock-names - power-domains - - dais unevaluatedProperties: false @@ -80,4 +93,50 @@ examples: clock-names = "ipg"; power-domains = <&pd_audmix>; dais = <&sai4>, <&sai5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + playback-only; + + amix_endpoint0: endpoint { + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + dai-tdm-slot-width-map = <32 8 32>; + dai-format = "dsp_a"; + remote-endpoint = <&be00_ep>; + }; + }; + + port@1 { + reg = <1>; + playback-only; + + amix_endpoint1: endpoint { + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + dai-tdm-slot-width-map = <32 8 32>; + dai-format = "dsp_a"; + remote-endpoint = <&be01_ep>; + }; + }; + + port@2 { + reg = <2>; + capture-only; + + amix_endpoint2: endpoint { + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + dai-tdm-slot-width-map = <32 8 32>; + dai-format = "dsp_a"; + bitclock-master; + frame-master; + remote-endpoint = <&be02_ep>; + }; + }; + }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,easrc.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,easrc.yaml index 0782f3f9947f..8f1108e7e14e 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,easrc.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,easrc.yaml @@ -80,27 +80,30 @@ required: - fsl,asrc-rate - fsl,asrc-format -additionalProperties: false +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/imx8mn-clock.h> easrc: easrc@300c0000 { - compatible = "fsl,imx8mn-easrc"; - reg = <0x300c0000 0x10000>; - interrupts = <0x0 122 0x4>; - clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; - clock-names = "mem"; - dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, - <&sdma2 18 23 0> , <&sdma2 19 23 0>, - <&sdma2 20 23 0> , <&sdma2 21 23 0>, - <&sdma2 22 23 0> , <&sdma2 23 23 0>; - dma-names = "ctx0_rx", "ctx0_tx", - "ctx1_rx", "ctx1_tx", - "ctx2_rx", "ctx2_tx", - "ctx3_rx", "ctx3_tx"; - firmware-name = "imx/easrc/easrc-imx8mn.bin"; - fsl,asrc-rate = <8000>; - fsl,asrc-format = <2>; + compatible = "fsl,imx8mn-easrc"; + reg = <0x300c0000 0x10000>; + interrupts = <0x0 122 0x4>; + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,esai.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,esai.yaml index f99ed20fa684..27c34ce4c2e2 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,esai.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,esai.yaml @@ -18,11 +18,15 @@ description: properties: compatible: - enum: - - fsl,imx35-esai - - fsl,imx6ull-esai - - fsl,imx8qm-esai - - fsl,vf610-esai + oneOf: + - enum: + - fsl,imx35-esai + - fsl,imx6ull-esai + - fsl,vf610-esai + - items: + - enum: + - fsl,imx8qm-esai + - const: fsl,imx6ull-esai reg: maxItems: 1 @@ -65,6 +69,9 @@ properties: - const: rx - const: tx + power-domains: + maxItems: 1 + fsl,fifo-depth: $ref: /schemas/types.yaml#/definitions/uint32 default: 64 @@ -101,6 +108,17 @@ unevaluatedProperties: false allOf: - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-esai + then: + required: + - power-domains + else: + properties: + power-domains: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,imx-asrc.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,imx-asrc.yaml index 76aa1f248488..85799f83e65f 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,imx-asrc.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,imx-asrc.yaml @@ -77,6 +77,10 @@ properties: power-domains: maxItems: 1 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + fsl,asrc-rate: $ref: /schemas/types.yaml#/definitions/uint32 description: The mutual sample rate used by DPCM Back Ends @@ -120,6 +124,7 @@ required: - fsl,asrc-width allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -145,7 +150,7 @@ allOf: required: - power-domains -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -173,4 +178,12 @@ examples: "txa", "txb", "txc"; fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; + + port { + playback-only; + + asrc_endpoint: endpoint { + remote-endpoint = <&fe00_ep>; + }; + }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,imx95-cm7-sof.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,imx95-cm7-sof.yaml new file mode 100644 index 000000000000..f00ae3219e15 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/fsl,imx95-cm7-sof.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,imx95-cm7-sof.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP imx95 CM7 core + +maintainers: + - Daniel Baluta <daniel.baluta@nxp.com> + +description: NXP imx95 CM7 core used for audio processing + +properties: + compatible: + const: fsl,imx95-cm7-sof + + reg: + maxItems: 1 + + reg-names: + const: sram + + memory-region: + maxItems: 1 + + memory-region-names: + const: dma + + port: + description: SAI3 port + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - memory-region + - memory-region-names + - port + +allOf: + - $ref: fsl,sof-cpu.yaml# + +unevaluatedProperties: false + +examples: + - | + cm7-cpu@80000000 { + compatible = "fsl,imx95-cm7-sof"; + reg = <0x80000000 0x6100000>; + reg-names = "sram"; + mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>; + mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; + memory-region = <&adma_res>; + memory-region-names = "dma"; + port { + /* SAI3-WM8962 link */ + endpoint { + remote-endpoint = <&wm8962_ep>; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,micfil.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,micfil.yaml index c1e9803fc113..c47b7a097490 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,micfil.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,micfil.yaml @@ -25,6 +25,7 @@ properties: - fsl,imx8mm-micfil - fsl,imx8mp-micfil - fsl,imx93-micfil + - fsl,imx943-micfil reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,mqs.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,mqs.yaml index 030ccc173130..1415247c92c8 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,mqs.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,mqs.yaml @@ -23,9 +23,14 @@ properties: - fsl,imx8qm-mqs - fsl,imx8qxp-mqs - fsl,imx93-mqs + - fsl,imx943-aonmix-mqs + - fsl,imx943-wakeupmix-mqs - fsl,imx95-aonmix-mqs - fsl,imx95-netcmix-mqs + "#sound-dai-cells": + const: 0 + clocks: minItems: 1 maxItems: 2 @@ -47,12 +52,17 @@ properties: resets: maxItems: 1 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - clocks - clock-names allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -84,7 +94,7 @@ allOf: required: - gpr -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,mxs-audio-sgtl5000.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,mxs-audio-sgtl5000.yaml new file mode 100644 index 000000000000..d12774b42a11 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/fsl,mxs-audio-sgtl5000.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,mxs-audio-sgtl5000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS audio complex with SGTL5000 codec + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + items: + - enum: + - bluegiga,apx4devkit-sgtl5000 + - denx,m28evk-sgtl5000 + - fsl,imx28-evk-sgtl5000 + - fsl,imx28-mbmx28lc-sgtl5000 + - fsl,imx28-tx28-sgtl5000 + - const: fsl,mxs-audio-sgtl5000 + + model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex + + saif-controllers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: The phandle list of the MXS SAIF controller + + audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SGTL5000 audio codec + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, SGTL5000 + pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +required: + - compatible + - saif-controllers + - audio-codec + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "fsl,imx28-evk-sgtl5000", "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,sai.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,sai.yaml index a5d9c246cc47..0d733e5b08a4 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,sai.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,sai.yaml @@ -41,6 +41,10 @@ properties: - fsl,imx93-sai - fsl,imx95-sai - fsl,vf610-sai + - items: + - enum: + - fsl,imx94-sai + - const: fsl,imx95-sai reg: maxItems: 1 @@ -93,6 +97,24 @@ properties: items: - description: receive and transmit interrupt + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: port for TX and RX + + port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: port for TX only + + port@2: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: port for RX only + big-endian: description: | required if all the SAI registers are big-endian rather than little-endian. @@ -204,4 +226,37 @@ examples: dma-names = "rx", "tx"; fsl,dataline = <1 0xff 0xff 2 0xff 0x11>; #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + playback-only; + + sai1_endpoint0: endpoint { + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + dai-tdm-slot-width-map = <32 8 32>; + dai-format = "dsp_a"; + bitclock-master; + frame-master; + remote-endpoint = <&mcodec01_ep>; + }; + }; + + port@2 { + reg = <2>; + capture-only; + + sai1_endpoint1: endpoint { + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + dai-tdm-slot-width-map = <32 8 32>; + dai-format = "dsp_a"; + remote-endpoint = <&fe02_ep>; + }; + }; + }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,sof-cpu.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,sof-cpu.yaml new file mode 100644 index 000000000000..31863932dbc3 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/fsl,sof-cpu.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,sof-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP audio processor common properties + +maintainers: + - Daniel Baluta <daniel.baluta@nxp.com> + +properties: + mboxes: + maxItems: 4 + + mbox-names: + items: + - const: txdb0 + - const: txdb1 + - const: rxdb0 + - const: rxdb1 + +required: + - mboxes + - mbox-names + +additionalProperties: true diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,spdif.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,spdif.yaml index 204f361cea27..5654e9f61aba 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,spdif.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,spdif.yaml @@ -16,16 +16,23 @@ description: | properties: compatible: - enum: - - fsl,imx35-spdif - - fsl,vf610-spdif - - fsl,imx6sx-spdif - - fsl,imx8qm-spdif - - fsl,imx8qxp-spdif - - fsl,imx8mq-spdif - - fsl,imx8mm-spdif - - fsl,imx8mn-spdif - - fsl,imx8ulp-spdif + oneOf: + - items: + - enum: + - fsl,imx35-spdif + - fsl,imx6sx-spdif + - fsl,imx8mm-spdif + - fsl,imx8mn-spdif + - fsl,imx8mq-spdif + - fsl,imx8qm-spdif + - fsl,imx8qxp-spdif + - fsl,imx8ulp-spdif + - fsl,vf610-spdif + - items: + - enum: + - fsl,imx6sl-spdif + - fsl,imx6sx-spdif + - const: fsl,imx35-spdif reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/sound/fsl,xcvr.yaml b/sys/contrib/device-tree/Bindings/sound/fsl,xcvr.yaml index 5e2801014221..f68d0e0ecfe5 100644 --- a/sys/contrib/device-tree/Bindings/sound/fsl,xcvr.yaml +++ b/sys/contrib/device-tree/Bindings/sound/fsl,xcvr.yaml @@ -140,21 +140,21 @@ examples: #include <dt-bindings/reset/imx8mp-reset.h> xcvr: xcvr@30cc0000 { - compatible = "fsl,imx8mp-xcvr"; - reg = <0x30cc0000 0x800>, - <0x30cc0800 0x400>, - <0x30cc0c00 0x080>, - <0x30cc0e00 0x080>; - reg-names = "ram", "regs", "rxfifo", "txfifo"; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>, - <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>, - <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, - <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; - clock-names = "ipg", "phy", "spba", "pll_ipg"; - dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; - dma-names = "rx", "tx"; - resets = <&audiomix_reset 0>; + compatible = "fsl,imx8mp-xcvr"; + reg = <0x30cc0000 0x800>, + <0x30cc0800 0x400>, + <0x30cc0c00 0x080>, + <0x30cc0e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; + dma-names = "rx", "tx"; + resets = <&audiomix_reset 0>; }; diff --git a/sys/contrib/device-tree/Bindings/sound/imx-audio-card.yaml b/sys/contrib/device-tree/Bindings/sound/imx-audio-card.yaml index f7ad5ea2491e..3c75c8c78987 100644 --- a/sys/contrib/device-tree/Bindings/sound/imx-audio-card.yaml +++ b/sys/contrib/device-tree/Bindings/sound/imx-audio-card.yaml @@ -46,6 +46,14 @@ patternProperties: description: see tdm-slot.txt. $ref: /schemas/types.yaml#/definitions/uint32 + playback-only: + description: link is used only for playback + $ref: /schemas/types.yaml#/definitions/flag + + capture-only: + description: link is used only for capture + $ref: /schemas/types.yaml#/definitions/flag + cpu: description: Holds subnode which indicates cpu dai. type: object @@ -71,6 +79,12 @@ patternProperties: - link-name - cpu + allOf: + - not: + required: + - playback-only + - capture-only + additionalProperties: false required: diff --git a/sys/contrib/device-tree/Bindings/sound/intel,keembay-i2s.yaml b/sys/contrib/device-tree/Bindings/sound/intel,keembay-i2s.yaml index 76b6f2cf25df..dca617860938 100644 --- a/sys/contrib/device-tree/Bindings/sound/intel,keembay-i2s.yaml +++ b/sys/contrib/device-tree/Bindings/sound/intel,keembay-i2s.yaml @@ -72,19 +72,19 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interrupt-controller/irq.h> - #define KEEM_BAY_PSS_AUX_I2S3 - #define KEEM_BAY_PSS_I2S3 - i2s3: i2s@20140000 { - compatible = "intel,keembay-i2s"; - #sound-dai-cells = <0>; - reg = <0x20140000 0x200>, /* I2S registers */ - <0x202a00a4 0x4>; /* I2S gen configuration */ - reg-names = "i2s-regs", "i2s_gen_cfg"; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "osc", "apb_clk"; - clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; - dmas = <&axi_dma0 29>, <&axi_dma0 33>; - dma-names = "tx", "rx"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #define KEEM_BAY_PSS_AUX_I2S3 + #define KEEM_BAY_PSS_I2S3 + i2s@20140000 { + compatible = "intel,keembay-i2s"; + #sound-dai-cells = <0>; + reg = <0x20140000 0x200>, /* I2S registers */ + <0x202a00a4 0x4>; /* I2S gen configuration */ + reg-names = "i2s-regs", "i2s_gen_cfg"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "osc", "apb_clk"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; + dmas = <&axi_dma0 29>, <&axi_dma0 33>; + dma-names = "tx", "rx"; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/invensense,ics43432.yaml b/sys/contrib/device-tree/Bindings/sound/invensense,ics43432.yaml new file mode 100644 index 000000000000..7bd984817aa9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/invensense,ics43432.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/invensense,ics43432.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Invensense ICS-43432-compatible MEMS Microphone with I2S Output + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: + The ICS-43432 and compatible MEMS microphones output audio over an I2S + interface and require no software configuration. The only host connection + is the I2S bus. The microphone requires an I2S clock frequency between + 460 kHz and 3.379 MHz and 64 clock cycles per stereo frame. Each frame + contains 32-bit slots per channel, with 24 bits carrying audio data. + A hardware pin determines whether the microphone outputs audio on the + left or right channel of the I2S frame. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - invensense,ics43432 + - cui,cmm-4030d-261 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + ics43432: ics43432 { + compatible = "invensense,ics43432"; + + port { + endpoint { + remote-endpoint = <&i2s1_endpoint>; + dai-format = "i2s"; + }; + }; + + }; diff --git a/sys/contrib/device-tree/Bindings/sound/irondevice,sma1307.yaml b/sys/contrib/device-tree/Bindings/sound/irondevice,sma1307.yaml new file mode 100644 index 000000000000..1e2a038d0048 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/irondevice,sma1307.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/irondevice,sma1307.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Iron Device SMA1307 Audio Amplifier + +maintainers: + - Kiseok Jo <kiseok.jo@irondevice.com> + +description: + SMA1307 boosted digital speaker amplifier with feedback-loop. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - irondevice,sma1307a + - irondevice,sma1307aq + description: + If a 'q' is added, it indicated the product is AEC-Q100 + qualified for automotive applications. SMA1307A supports + both WLCSP and QFN packages. However, SMA1307AQ only + supports the QFN package. + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + amplifier@1e { + compatible = "irondevice,sma1307a"; + reg = <0x1e>; + #sound-dai-cells = <1>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/loongson,ls1b-ac97.yaml b/sys/contrib/device-tree/Bindings/sound/loongson,ls1b-ac97.yaml new file mode 100644 index 000000000000..1c6a2771f942 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/loongson,ls1b-ac97.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/loongson,ls1b-ac97.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1 AC97 Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: + The Loongson-1 AC97 controller supports 2-channel stereo output and input. + It is paired with the DMA engine to handle playback and capture functions. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + oneOf: + - const: loongson,ls1b-ac97 + - items: + - enum: + - loongson,ls1a-ac97 + - loongson,ls1c-ac97 + - const: loongson,ls1b-ac97 + + reg: + maxItems: 3 + + reg-names: + items: + - const: ac97 + - const: audio-tx + - const: audio-rx + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - reg-names + - dmas + - dma-names + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + audio-controller@1fe74000 { + compatible = "loongson,ls1b-ac97"; + reg = <0x1fe74000 0x60>, <0x1fe72420 0x4>, <0x1fe74c4c 0x4>; + reg-names = "ac97", "audio-tx", "audio-rx"; + dmas = <&dma 1>, <&dma 2>; + dma-names = "tx", "rx"; + #sound-dai-cells = <0>; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/loongson,ls2k1000-i2s.yaml b/sys/contrib/device-tree/Bindings/sound/loongson,ls2k1000-i2s.yaml new file mode 100644 index 000000000000..da79510bb2d9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/loongson,ls2k1000-i2s.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/loongson,ls2k1000-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2K1000 I2S controller + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: loongson,ls2k1000-i2s + + reg: + items: + - description: Loongson I2S controller Registers. + - description: APB DMA config register for Loongson I2S controller. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - dmas + - dma-names + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls2k-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2s@1fe2d000 { + compatible = "loongson,ls2k1000-i2s"; + reg = <0x1fe2d000 0x14>, + <0x1fe00438 0x8>; + interrupt-parent = <&liointc0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + dmas = <&apbdma2 0>, <&apbdma3 0>; + dma-names = "tx", "rx"; + #sound-dai-cells = <0>; + }; +... diff --git a/sys/contrib/device-tree/Bindings/sound/maxim,max98390.yaml b/sys/contrib/device-tree/Bindings/sound/maxim,max98390.yaml index deaa6886c42f..d35dd8408c61 100644 --- a/sys/contrib/device-tree/Bindings/sound/maxim,max98390.yaml +++ b/sys/contrib/device-tree/Bindings/sound/maxim,max98390.yaml @@ -9,6 +9,9 @@ title: Maxim Integrated MAX98390 Speaker Amplifier with Integrated Dynamic Speak maintainers: - Steve Lee <steves.lee@maximintegrated.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: maxim,max98390 @@ -32,11 +35,14 @@ properties: reset-gpios: maxItems: 1 + '#sound-dai-cells': + const: 0 + required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/sound/maxim,max98925.yaml b/sys/contrib/device-tree/Bindings/sound/maxim,max98925.yaml index 32fd86204a7a..121e8d2d44da 100644 --- a/sys/contrib/device-tree/Bindings/sound/maxim,max98925.yaml +++ b/sys/contrib/device-tree/Bindings/sound/maxim,max98925.yaml @@ -77,11 +77,11 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; - #include <dt-bindings/gpio/gpio.h> audio-codec@3a { compatible = "maxim,max98927"; reg = <0x3a>; diff --git a/sys/contrib/device-tree/Bindings/sound/mediatek,mt8173-afe-pcm.yaml b/sys/contrib/device-tree/Bindings/sound/mediatek,mt8173-afe-pcm.yaml new file mode 100644 index 000000000000..d8993b5d457a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/mediatek,mt8173-afe-pcm.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8173-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek AFE PCM controller for MT8173 + +maintainers: + - Trevor Wu <trevor.wu@mediatek.com> + +properties: + compatible: + const: mediatek,mt8173-afe-pcm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: audio infra sys clock + - description: audio top mux + - description: audio intbus mux + - description: apll1 clock + - description: apll2 clock + - description: i2s0 mclk mux + - description: i2s1 mclk mux + - description: i2s2 mclk mux + - description: i2s3 mclk mux + - description: i2s3 bclk mux + + clock-names: + items: + - const: infra_sys_audio_clk + - const: top_pdn_audio + - const: top_pdn_aud_intbus + - const: bck0 + - const: bck1 + - const: i2s0_m + - const: i2s1_m + - const: i2s2_m + - const: i2s3_m + - const: i2s3_b + + power-domains: + maxItems: 1 + + memory-region: + description: memory region for audio DMA buffers + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8173-power.h> + + mt8173-afe-pcm@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + reg = <0x11220000 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>; + power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>; + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUDIO_SEL>, + <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&topckgen CLK_TOP_APLL1_DIV0>, + <&topckgen CLK_TOP_APLL2_DIV0>, + <&topckgen CLK_TOP_I2S0_M_SEL>, + <&topckgen CLK_TOP_I2S1_M_SEL>, + <&topckgen CLK_TOP_I2S2_M_SEL>, + <&topckgen CLK_TOP_I2S3_M_SEL>, + <&topckgen CLK_TOP_I2S3_B_SEL>; + clock-names = "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + memory-region = <&afe_dma_mem>; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/mediatek,mt8188-mt6359.yaml b/sys/contrib/device-tree/Bindings/sound/mediatek,mt8188-mt6359.yaml index f94ad0715e32..7ba2ea2dfa0b 100644 --- a/sys/contrib/device-tree/Bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/sys/contrib/device-tree/Bindings/sound/mediatek,mt8188-mt6359.yaml @@ -14,11 +14,15 @@ allOf: properties: compatible: - enum: - - mediatek,mt8188-es8326 - - mediatek,mt8188-mt6359-evb - - mediatek,mt8188-nau8825 - - mediatek,mt8188-rt5682s + oneOf: + - enum: + - mediatek,mt8188-es8326 + - mediatek,mt8188-mt6359-evb + - mediatek,mt8188-nau8825 + - mediatek,mt8188-rt5682s + - items: + - const: mediatek,mt8390-mt6359-evk + - const: mediatek,mt8188-mt6359-evb audio-routing: description: @@ -29,6 +33,21 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8188 ASoC platform. + mediatek,adsp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the MT8188 ADSP platform, which is the optional Audio DSP + hardware that provides additional audio functionalities if present. + The AFE will link to ADSP when the phandle is provided. + + mediatek,accdet: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the MT6359 accessory detection block, which detects audio + jack insertion and removal. This property should only be present if the + accdet block is actually wired to the audio jack pins and to be used for + jack detection. + patternProperties: "^dai-link-[0-9]+$": type: object @@ -49,6 +68,9 @@ patternProperties: - ETDM2_OUT_BE - ETDM3_OUT_BE - PCM1_BE + - DL_SRC_BE + - UL_SRC_BE + - DMIC_BE codec: description: Holds subnode which indicates codec dai. @@ -74,10 +96,9 @@ patternProperties: mediatek,clk-provider: $ref: /schemas/types.yaml#/definitions/string description: Indicates dai-link clock master. - items: - enum: - - cpu - - codec + enum: + - cpu + - codec additionalProperties: false diff --git a/sys/contrib/device-tree/Bindings/sound/mt6359.yaml b/sys/contrib/device-tree/Bindings/sound/mt6359.yaml index 23d411fc4200..128698630c86 100644 --- a/sys/contrib/device-tree/Bindings/sound/mt6359.yaml +++ b/sys/contrib/device-tree/Bindings/sound/mt6359.yaml @@ -23,8 +23,8 @@ properties: Indicates how many data pins are used to transmit two channels of PDM signal. 0 means two wires, 1 means one wire. Default value is 0. enum: - - 0 # one wire - - 1 # two wires + - 0 # two wires + - 1 # one wire mediatek,mic-type-0: $ref: /schemas/types.yaml#/definitions/uint32 @@ -53,9 +53,9 @@ additionalProperties: false examples: - | - mt6359codec: mt6359codec { - mediatek,dmic-mode = <0>; - mediatek,mic-type-0 = <2>; + mt6359codec: audio-codec { + mediatek,dmic-mode = <0>; + mediatek,mic-type-0 = <2>; }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/mt8186-afe-pcm.yaml b/sys/contrib/device-tree/Bindings/sound/mt8186-afe-pcm.yaml index 7fe85b08f9df..f5af2cf18158 100644 --- a/sys/contrib/device-tree/Bindings/sound/mt8186-afe-pcm.yaml +++ b/sys/contrib/device-tree/Bindings/sound/mt8186-afe-pcm.yaml @@ -25,6 +25,10 @@ properties: reset-names: const: audiosys + memory-region: + description: memory region for audio DMA buffers + maxItems: 1 + mediatek,apmixedsys: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek apmixedsys controller @@ -170,6 +174,7 @@ examples: "top_apll12_div_tdm", "top_mux_audio_h", "top_clk26m_clk"; + memory-region = <&afe_dma_mem>; }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/sys/contrib/device-tree/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml index cbc641ecbe94..037f21443ad1 100644 --- a/sys/contrib/device-tree/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml +++ b/sys/contrib/device-tree/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml @@ -124,10 +124,9 @@ patternProperties: mediatek,clk-provider: $ref: /schemas/types.yaml#/definitions/string description: Indicates dai-link clock master. - items: - enum: - - cpu - - codec + enum: + - cpu + - codec required: - link-name diff --git a/sys/contrib/device-tree/Bindings/sound/mt8192-afe-pcm.yaml b/sys/contrib/device-tree/Bindings/sound/mt8192-afe-pcm.yaml index 064ef172bef4..8ddf49b0040d 100644 --- a/sys/contrib/device-tree/Bindings/sound/mt8192-afe-pcm.yaml +++ b/sys/contrib/device-tree/Bindings/sound/mt8192-afe-pcm.yaml @@ -23,6 +23,10 @@ properties: reset-names: const: audiosys + memory-region: + description: memory region for audio DMA buffers + maxItems: 1 + mediatek,apmixedsys: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek apmixedsys controller @@ -95,6 +99,7 @@ examples: "aud_dac_predis_clk", "aud_infra_clk", "aud_infra_26m_clk"; + memory-region = <&afe_dma_mem>; }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/mt8195-mt6359.yaml b/sys/contrib/device-tree/Bindings/sound/mt8195-mt6359.yaml index 2af1d8ffbd8b..356e1feee962 100644 --- a/sys/contrib/device-tree/Bindings/sound/mt8195-mt6359.yaml +++ b/sys/contrib/device-tree/Bindings/sound/mt8195-mt6359.yaml @@ -21,6 +21,7 @@ properties: - mediatek,mt8195_mt6359_rt1019_rt5682 - mediatek,mt8195_mt6359_rt1011_rt5682 - mediatek,mt8195_mt6359_max98390_rt5682 + - mediatek,mt8195_mt6359 model: $ref: /schemas/types.yaml#/definitions/string @@ -44,6 +45,8 @@ properties: - Right Spk # Sources + - Headphone L + - Headphone R - Headset Mic - HPOL - HPOR @@ -88,6 +91,7 @@ patternProperties: link-name: description: Indicates dai-link name and PCM stream name enum: + - DL_SRC_BE - DPTX_BE - ETDM1_IN_BE - ETDM2_IN_BE diff --git a/sys/contrib/device-tree/Bindings/sound/neofidelity,ntp8835.yaml b/sys/contrib/device-tree/Bindings/sound/neofidelity,ntp8835.yaml new file mode 100644 index 000000000000..44d72a2ddfc9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/neofidelity,ntp8835.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/neofidelity,ntp8835.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NeoFidelity NTP8835/NTP8835C Amplifiers + +maintainers: + - Igor Prusov <ivprusov@salutedevices.com> + +description: | + The NTP8835 is a single chip full digital audio amplifier + including power stages for stereo amplifier systems. + NTP8835 is integrated with versatile digital audio signal + processing functions, high-performance, high-fidelity fully + digital PWM modulator and two high-power full-bridge MOSFET + power stages. NTP8835C has identical programming interface, + but has different output signal characteristics. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - neofidelity,ntp8835 + - neofidelity,ntp8835c + + reg: + enum: + - 0x2a + - 0x2b + - 0x2c + - 0x2d + + reset-gpios: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: wck + - const: bck + - const: scl + - const: mclk + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@2b { + compatible = "neofidelity,ntp8835"; + #sound-dai-cells = <0>; + reg = <0x2b>; + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + clocks = <&clkc 551>, <&clkc 552>, <&clkc 553>, <&clkc 554>; + clock-names = "wck", "bck", "scl", "mclk"; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/neofidelity,ntp8918.yaml b/sys/contrib/device-tree/Bindings/sound/neofidelity,ntp8918.yaml new file mode 100644 index 000000000000..6946177e391a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/neofidelity,ntp8918.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/neofidelity,ntp8918.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NeoFidelity NTP8918 Amplifier + +maintainers: + - Igor Prusov <ivprusov@salutedevices.com> + +description: + The NTP8918 is a single chip full digital audio amplifier + including power stage for stereo amplifier system. + The NTP8918 is integrated with versatile digital audio signal + processing functions, high-performance, high-fidelity fully + digital PWM modulator and two high-power full-bridge MOSFET + power stages. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - neofidelity,ntp8918 + + reg: + enum: + - 0x2a + - 0x2b + - 0x2c + - 0x2d + + reset-gpios: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: wck + - const: scl + - const: bck + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@2a { + compatible = "neofidelity,ntp8918"; + #sound-dai-cells = <0>; + reg = <0x2a>; + clocks = <&clkc 150>, <&clkc 151>, <&clkc 152>; + clock-names = "wck", "scl", "bck"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra-audio-graph-card.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra-audio-graph-card.yaml index b4bee466d67a..da89523ccf5f 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra-audio-graph-card.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra-audio-graph-card.yaml @@ -23,6 +23,7 @@ properties: enum: - nvidia,tegra210-audio-graph-card - nvidia,tegra186-audio-graph-card + - nvidia,tegra264-audio-graph-card clocks: minItems: 2 diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-asrc.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-asrc.yaml index e15f387c4c29..66b56e71599b 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-asrc.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-asrc.yaml @@ -31,7 +31,9 @@ properties: compatible: oneOf: - - const: nvidia,tegra186-asrc + - enum: + - nvidia,tegra186-asrc + - nvidia,tegra264-asrc - items: - enum: - nvidia,tegra234-asrc diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-dspk.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-dspk.yaml index e1362c77472b..46ba167081ef 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-dspk.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra186-dspk.yaml @@ -29,6 +29,7 @@ properties: - const: nvidia,tegra186-dspk - items: - enum: + - nvidia,tegra264-dspk - nvidia,tegra234-dspk - nvidia,tegra194-dspk - const: nvidia,tegra186-dspk diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-admaif.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-admaif.yaml index 15ab40aeab1e..b32f33214ba6 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-admaif.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-admaif.yaml @@ -26,6 +26,7 @@ properties: - enum: - nvidia,tegra210-admaif - nvidia,tegra186-admaif + - nvidia,tegra264-admaif - items: - enum: - nvidia,tegra234-admaif @@ -39,6 +40,19 @@ properties: dma-names: true + interconnects: + items: + - description: APE read memory client + - description: APE write memory client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports description: | @@ -74,6 +88,9 @@ then: Should be "tx1", "tx2" ... "tx10" for DMA Tx channel minItems: 1 maxItems: 20 + interconnects: false + interconnect-names: false + iommus: false else: properties: diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-adx.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-adx.yaml index e4c871797fa6..19a80929f93e 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-adx.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-adx.yaml @@ -27,7 +27,9 @@ properties: compatible: oneOf: - - const: nvidia,tegra210-adx + - enum: + - nvidia,tegra210-adx + - nvidia,tegra264-adx - items: - enum: - nvidia,tegra234-adx diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ahub.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ahub.yaml index c4abac81f207..1c9f24d26819 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ahub.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ahub.yaml @@ -27,6 +27,7 @@ properties: - nvidia,tegra210-ahub - nvidia,tegra186-ahub - nvidia,tegra234-ahub + - nvidia,tegra264-ahub - items: - const: nvidia,tegra194-ahub - const: nvidia,tegra186-ahub diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-amx.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-amx.yaml index 021b72546ba4..89712102cfdf 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-amx.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-amx.yaml @@ -26,11 +26,13 @@ properties: compatible: oneOf: - - const: nvidia,tegra210-amx + - enum: + - nvidia,tegra210-amx + - nvidia,tegra194-amx + - nvidia,tegra264-amx - items: - const: nvidia,tegra186-amx - const: nvidia,tegra210-amx - - const: nvidia,tegra194-amx - items: - const: nvidia,tegra234-amx - const: nvidia,tegra194-amx diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-dmic.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-dmic.yaml index bff551c35da7..bb8088878d4b 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-dmic.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-dmic.yaml @@ -28,6 +28,7 @@ properties: - const: nvidia,tegra210-dmic - items: - enum: + - nvidia,tegra264-dmic - nvidia,tegra234-dmic - nvidia,tegra194-dmic - nvidia,tegra186-dmic diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-i2s.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-i2s.yaml index a82f11fb6c9a..903e815af8fd 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-i2s.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-i2s.yaml @@ -25,7 +25,9 @@ properties: compatible: oneOf: - - const: nvidia,tegra210-i2s + - enum: + - nvidia,tegra210-i2s + - nvidia,tegra264-i2s - items: - enum: - nvidia,tegra234-i2s diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mbdrc.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mbdrc.yaml index 5b9198602fc6..4c121b9cde1e 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mbdrc.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mbdrc.yaml @@ -23,6 +23,7 @@ properties: - const: nvidia,tegra210-mbdrc - items: - enum: + - nvidia,tegra264-mbdrc - nvidia,tegra234-mbdrc - nvidia,tegra194-mbdrc - nvidia,tegra186-mbdrc diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mixer.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mixer.yaml index 049898f02e85..56b4c4fc123c 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mixer.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mixer.yaml @@ -28,6 +28,7 @@ properties: - const: nvidia,tegra210-amixer - items: - enum: + - nvidia,tegra264-amixer - nvidia,tegra234-amixer - nvidia,tegra194-amixer - nvidia,tegra186-amixer diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mvc.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mvc.yaml index d0280d8aa3af..bde4ac6319b1 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mvc.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-mvc.yaml @@ -31,6 +31,7 @@ properties: - const: nvidia,tegra210-mvc - items: - enum: + - nvidia,tegra264-mvc - nvidia,tegra234-mvc - nvidia,tegra194-mvc - nvidia,tegra186-mvc diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ope.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ope.yaml index 9017fb6d575d..756c3096a2d6 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ope.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-ope.yaml @@ -25,6 +25,7 @@ properties: - const: nvidia,tegra210-ope - items: - enum: + - nvidia,tegra264-ope - nvidia,tegra234-ope - nvidia,tegra194-ope - nvidia,tegra186-ope diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-peq.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-peq.yaml index 1e373c49d639..2f11a484dc2e 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-peq.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-peq.yaml @@ -24,6 +24,7 @@ properties: - const: nvidia,tegra210-peq - items: - enum: + - nvidia,tegra264-peq - nvidia,tegra234-peq - nvidia,tegra194-peq - nvidia,tegra186-peq diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-sfc.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-sfc.yaml index 185ca0be4f02..959aa7fffdac 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-sfc.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra210-sfc.yaml @@ -28,6 +28,7 @@ properties: - const: nvidia,tegra210-sfc - items: - enum: + - nvidia,tegra264-sfc - nvidia,tegra234-sfc - nvidia,tegra194-sfc - nvidia,tegra186-sfc diff --git a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra30-hda.yaml b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra30-hda.yaml index 12c31b4b99e1..8a8767589ee0 100644 --- a/sys/contrib/device-tree/Bindings/sound/nvidia,tegra30-hda.yaml +++ b/sys/contrib/device-tree/Bindings/sound/nvidia,tegra30-hda.yaml @@ -20,14 +20,17 @@ properties: compatible: oneOf: - - const: nvidia,tegra30-hda + - enum: + - nvidia,tegra30-hda + - nvidia,tegra194-hda + - nvidia,tegra234-hda + - nvidia,tegra264-hda - items: - enum: - - nvidia,tegra234-hda - - nvidia,tegra194-hda - nvidia,tegra186-hda - nvidia,tegra210-hda - nvidia,tegra124-hda + - nvidia,tegra114-hda - const: nvidia,tegra30-hda - items: - const: nvidia,tegra132-hda @@ -42,15 +45,12 @@ properties: maxItems: 1 clocks: - minItems: 2 + minItems: 1 maxItems: 3 clock-names: - minItems: 2 - items: - - const: hda - - const: hda2hdmi - - const: hda2codec_2x + minItems: 1 + maxItems: 3 resets: minItems: 2 @@ -58,10 +58,7 @@ properties: reset-names: minItems: 2 - items: - - const: hda - - const: hda2hdmi - - const: hda2codec_2x + maxItems: 3 power-domains: maxItems: 1 @@ -92,6 +89,92 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra30-hda + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: hda + - const: hda2hdmi + - const: hda2codec_2x + resets: + minItems: 3 + reset-names: + items: + - const: hda + - const: hda2hdmi + - const: hda2codec_2x + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra194-hda + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: hda + - const: hda2hdmi + - const: hda2codec_2x + resets: + maxItems: 2 + reset-names: + items: + - const: hda + - const: hda2hdmi + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra234-hda + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: hda + - const: hda2codec_2x + resets: + maxItems: 2 + reset-names: + items: + - const: hda + - const: hda2codec_2x + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra264-hda + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: hda + resets: + maxItems: 2 + reset-names: + items: + - const: hda + - const: hda2codec_2x + power-domains: false + examples: - | #include<dt-bindings/clock/tegra124-car-common.h> diff --git a/sys/contrib/device-tree/Bindings/sound/nxp,uda1342.yaml b/sys/contrib/device-tree/Bindings/sound/nxp,uda1342.yaml new file mode 100644 index 000000000000..71c6a5a2f5bc --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/nxp,uda1342.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nxp,uda1342.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP uda1342 audio CODECs + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nxp,uda1342 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "nxp,uda1342"; + reg = <0x1a>; + #sound-dai-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-rx-macro.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-rx-macro.yaml index b8540b30741e..92f95eb74b19 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-rx-macro.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-rx-macro.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,sm8650-lpass-rx-macro + - qcom,sm8750-lpass-rx-macro - qcom,x1e80100-lpass-rx-macro - const: qcom,sm8550-lpass-rx-macro diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-tx-macro.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-tx-macro.yaml index 3e2ae16c6aba..914798a89878 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-tx-macro.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-tx-macro.yaml @@ -22,6 +22,7 @@ properties: - items: - enum: - qcom,sm8650-lpass-tx-macro + - qcom,sm8750-lpass-tx-macro - qcom,x1e80100-lpass-tx-macro - const: qcom,sm8550-lpass-tx-macro diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-va-macro.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-va-macro.yaml index 6b483fa3c428..dd549db6c841 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-va-macro.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-va-macro.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,sm8650-lpass-va-macro + - qcom,sm8750-lpass-va-macro - qcom,x1e80100-lpass-va-macro - const: qcom,sm8550-lpass-va-macro @@ -39,7 +40,11 @@ properties: clock-names: minItems: 1 - maxItems: 4 + items: + - const: mclk + - const: macro + - const: dcodec + - const: npl clock-output-names: maxItems: 1 @@ -79,8 +84,7 @@ allOf: clocks: maxItems: 1 clock-names: - items: - - const: mclk + maxItems: 1 - if: properties: @@ -93,10 +97,8 @@ allOf: minItems: 3 maxItems: 3 clock-names: - items: - - const: mclk - - const: macro - - const: dcodec + minItems: 3 + maxItems: 3 - if: properties: @@ -111,11 +113,8 @@ allOf: minItems: 4 maxItems: 4 clock-names: - items: - - const: mclk - - const: macro - - const: dcodec - - const: npl + minItems: 4 + maxItems: 4 - if: properties: @@ -129,10 +128,8 @@ allOf: minItems: 3 maxItems: 3 clock-names: - items: - - const: mclk - - const: macro - - const: dcodec + minItems: 3 + maxItems: 3 unevaluatedProperties: false diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-wsa-macro.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-wsa-macro.yaml index 6f5644a89feb..9082e363c709 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,lpass-wsa-macro.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,sm8650-lpass-wsa-macro + - qcom,sm8750-lpass-wsa-macro - qcom,x1e80100-lpass-wsa-macro - const: qcom,sm8550-lpass-wsa-macro diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,q6afe.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,q6afe.yaml index 297aa362aa54..268f7073d797 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,q6afe.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,q6afe.yaml @@ -29,6 +29,12 @@ properties: unevaluatedProperties: false description: Qualcomm DSP audio ports + usbd: + type: object + $ref: /schemas/sound/qcom,q6usb.yaml# + unevaluatedProperties: false + description: Qualcomm DSP USB audio ports + required: - compatible - dais @@ -64,5 +70,12 @@ examples: qcom,sd-lines = <0 1 2 3>; }; }; + + usbd { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,sm8250.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,sm8250.yaml index 2e2e01493a5f..5d3dbb6cb1ae 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,sm8250.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,sm8250.yaml @@ -25,11 +25,17 @@ properties: - enum: - qcom,sm8550-sndcard - qcom,sm8650-sndcard + - qcom,sm8750-sndcard - const: qcom,sm8450-sndcard - enum: + - fairphone,fp4-sndcard + - fairphone,fp5-sndcard - qcom,apq8096-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard + - qcom,qcs8275-sndcard + - qcom,qcs9075-sndcard + - qcom,qcs9100-sndcard - qcom,qrb4210-rb2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard @@ -189,4 +195,19 @@ examples: sound-dai = <&vamacro 0>; }; }; + + usb-dai-link { + link-name = "USB Playback"; + cpu { + sound-dai = <&q6afedai USB_RX>; + }; + + codec { + sound-dai = <&usbdai USB_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,wcd937x-sdw.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,wcd937x-sdw.yaml index d3cf8f59cb23..c8543f969ebb 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,wcd937x-sdw.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,wcd937x-sdw.yaml @@ -58,6 +58,40 @@ properties: items: enum: [1, 2, 3, 4, 5] + qcom,tx-channel-mapping: + description: | + Specifies static channel mapping between slave and master tx port + channels. + In the order of slave port channels which is adc1, adc2, adc3, + dmic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 12 + maxItems: 12 + additionalItems: false + items: + enum: + - 1 # WCD9370_SWRM_CH1 + - 2 # WCD9370_SWRM_CH2 + - 3 # WCD9370_SWRM_CH3 + - 4 # WCD9370_SWRM_CH4 + + qcom,rx-channel-mapping: + description: | + Specifies static channels mapping between slave and master rx port + channels. + In the order of slave port channels, which is + hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 8 + maxItems: 8 + additionalItems: false + items: + enum: + - 1 # WCD9370_SWRM_CH1 + - 2 # WCD9370_SWRM_CH2 + - 3 # WCD9370_SWRM_CH3 + - 4 # WCD9370_SWRM_CH4 + required: - compatible - reg @@ -74,6 +108,7 @@ examples: compatible = "sdw20217010a00"; reg = <0 4>; qcom,rx-port-mapping = <1 2 3 4 5>; + qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>; }; }; @@ -85,6 +120,7 @@ examples: compatible = "sdw20217010a00"; reg = <0 3>; qcom,tx-port-mapping = <2 2 3 4>; + qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>; }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,wcd938x.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,wcd938x.yaml index 10531350c336..ab1c6285dbf8 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,wcd938x.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,wcd938x.yaml @@ -23,9 +23,15 @@ properties: - qcom,wcd9380-codec - qcom,wcd9385-codec + mux-controls: + description: A reference to the audio mux switch for + switching CTIA/OMTP Headset types + maxItems: 1 + us-euro-gpios: description: GPIO spec for swapping gnd and mic segments maxItems: 1 + deprecated: true required: - compatible diff --git a/sys/contrib/device-tree/Bindings/sound/qcom,wcd939x.yaml b/sys/contrib/device-tree/Bindings/sound/qcom,wcd939x.yaml index c69291f4d575..85283f94465d 100644 --- a/sys/contrib/device-tree/Bindings/sound/qcom,wcd939x.yaml +++ b/sys/contrib/device-tree/Bindings/sound/qcom,wcd939x.yaml @@ -45,6 +45,9 @@ properties: purpose of handling altmode muxing and orientation switching to detect and enable Audio Accessory Mode. + vdd-px-supply: + description: A reference to the 1.2V PX supply + required: - compatible diff --git a/sys/contrib/device-tree/Bindings/sound/realtek,alc203.yaml b/sys/contrib/device-tree/Bindings/sound/realtek,alc203.yaml new file mode 100644 index 000000000000..6b90788b45eb --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/realtek,alc203.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,alc203.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek ALC203 AC97 Audio Codec + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: + ALC203 is a full duplex AC97 2.3 compatible stereo audio codec. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: realtek,alc203 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + audio-codec { + compatible = "realtek,alc203"; + #sound-dai-cells = <0>; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/realtek,rt5640.yaml b/sys/contrib/device-tree/Bindings/sound/realtek,rt5640.yaml new file mode 100644 index 000000000000..3f4f59287c1c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/realtek,rt5640.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT5640/RT5639 audio CODEC + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + This device supports I2C only. + + Pins on the device (for linking into audio routes) for RT5639/RT5640: + * DMIC1 + * DMIC2 + * MICBIAS1 + * IN1P + * IN1N + * IN2P + * IN2N + * IN3P + * IN3N + * HPOL + * HPOR + * LOUTL + * LOUTR + * SPOLP + * SPOLN + * SPORP + * SPORN + + Additional pins on the device for RT5640: + * MONOP + * MONON + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - realtek,rt5640 + - realtek,rt5639 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: The CODEC's interrupt output. + + realtek,in1-differential: + description: + Indicate MIC1 input is differential, rather than single-ended. + type: boolean + + realtek,in2-differential: + description: + Indicate MIC2 input is differential, rather than single-ended. + type: boolean + + realtek,in3-differential: + description: + Indicate MIC3 input is differential, rather than single-ended. + type: boolean + + realtek,lout-differential: + description: + Indicate LOUT output is differential, rather than single-ended. + type: boolean + + realtek,dmic1-data-pin: + description: Specify which pin to be used as DMIC1 data pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 is not used + - 1 # using IN2P pin as dmic1 data pin + - 2 # using GPIO3 pin as dmic1 data pin + + realtek,dmic2-data-pin: + description: Specify which pin to be used as DMIC2 data pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic2 is not used + - 1 # using IN2N pin as dmic2 data pin + - 2 # using GPIO4 pin as dmic2 data pin + + realtek,jack-detect-source: + description: The Jack Detect source. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # Jack Detect function is not used + - 1 # Use GPIO1 for jack-detect + - 2 # Use JD1_IN4P for jack-detect + - 3 # Use JD2_IN4N for jack-detect + - 4 # Use GPIO2 for jack-detect + - 5 # Use GPIO3 for jack-detect + - 6 # Use GPIO4 for jack-detect + + realtek,jack-detect-not-inverted: + description: + Normal jack-detect switches give an inverted signal, set this bool + in the rare case you've a jack-detect switch which is not inverted. + type: boolean + + realtek,over-current-threshold-microamp: + description: micbias over-current detection threshold in µA + enum: + - 600 + - 1500 + - 2000 + + realtek,over-current-scale-factor: + description: micbias over-current detection scale-factor + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # Scale current by 0.5 + - 1 # Scale current by 0.75 + - 2 # Scale current by 1.0 + - 3 # Scale current by 1.5 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "realtek,rt5640"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/realtek,rt5645.yaml b/sys/contrib/device-tree/Bindings/sound/realtek,rt5645.yaml index 13f09f1bc800..0a698798c22b 100644 --- a/sys/contrib/device-tree/Bindings/sound/realtek,rt5645.yaml +++ b/sys/contrib/device-tree/Bindings/sound/realtek,rt5645.yaml @@ -51,7 +51,7 @@ properties: description: Power supply for AVDD, providing 1.8V. cpvdd-supply: - description: Power supply for CPVDD, providing 3.5V. + description: Power supply for CPVDD, providing 1.8V. hp-detect-gpios: description: diff --git a/sys/contrib/device-tree/Bindings/sound/realtek,rt5682.yaml b/sys/contrib/device-tree/Bindings/sound/realtek,rt5682.yaml new file mode 100644 index 000000000000..39333ea05646 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/realtek,rt5682.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5682.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek rt5682 and rt5682i codecs + +maintainers: + - Bard Liao <bardliao@realtek.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - realtek,rt5682 + - realtek,rt5682i + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: The CODEC's interrupt output. + + realtek,dmic1-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 data is not used + - 1 # using GPIO2 pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin + description: + Specify which GPIO pin be used as DMIC1 data pin. + + realtek,dmic1-clk-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # using GPIO1 pin as dmic1 clock pin + - 1 # using GPIO3 pin as dmic1 clock pin + description: + Specify which GPIO pin be used as DMIC1 clk pin. + + realtek,jd-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # No JD is used + - 1 # using JD1 as JD source + description: + Specify which JD source be used. + + realtek,ldo1-en-gpios: + description: + The GPIO that controls the CODEC's LDO1_EN pin. + + realtek,btndet-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The debounce delay for push button. + The delay time is realtek,btndet-delay value multiple of 8.192 ms. + If absent, the default is 16. + + realtek,dmic-clk-rate-hz: + description: + Set the clock rate (hz) for the requirement of the particular DMIC. + + realtek,dmic-delay-ms: + description: + Set the delay time (ms) for the requirement of the particular DMIC. + + realtek,dmic-clk-driving-high: + type: boolean + description: + Set the high driving of the DMIC clock out. + + clocks: + items: + - description: phandle and clock specifier for codec MCLK. + + clock-names: + items: + - const: mclk + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 2 + maxItems: 2 + description: Name given for DAI word clock and bit clock outputs. + + "#sound-dai-cells": + const: 1 + + AVDD-supply: + description: Regulator supplying analog power through the AVDD pin. + + MICVDD-supply: + description: Regulator supplying power for the microphone bias through + the MICVDD pin. + + VBAT-supply: + description: Regulator supplying battery power through the VBAT pin. + + DBVDD-supply: + description: Regulator supplying I/O power through the DBVDD pin. + + LDO1-IN-supply: + description: Regulator supplying power to the digital core and charge + pump through the LDO1_IN pin. + +required: + - compatible + - reg + - AVDD-supply + - VBAT-supply + - MICVDD-supply + - DBVDD-supply + - LDO1-IN-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "realtek,rt5682"; + reg = <0x1a>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + realtek,ldo1-en-gpios = + <&gpio 2 GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + + #clock-cells = <1>; + clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk"; + + clocks = <&osc>; + clock-names = "mclk"; + + AVDD-supply = <&avdd_reg>; + VBAT-supply = <&vbat_reg>; + MICVDD-supply = <&micvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + LDO1-IN-supply = <&ldo1_in_reg>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.txt b/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.txt index dfd768b1ad7d..3f07b072d995 100644 --- a/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.txt +++ b/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.txt @@ -109,7 +109,7 @@ For more detail information, see below - Register Description - CTUn Scale Value exx Register (CTUn_SVxxR) - ${LINUX}/sound/soc/sh/rcar/ctu.c + ${LINUX}/sound/soc/renesas/rcar/ctu.c - comment of header You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. diff --git a/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.yaml b/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.yaml index 6d0d1514cd42..e8a2acb92646 100644 --- a/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.yaml +++ b/sys/contrib/device-tree/Bindings/sound/renesas,rsnd.yaml @@ -112,12 +112,6 @@ properties: description: List of necessary clock names. # details are defined below - post-init-providers: - description: At least if rsnd is using DPCM connection on Audio-Graph-Card2, - fw_devlink might doesn't have enough information to break the cycle. rsnd - driver will not be probed in such case. Same problem might occur with - Multi-CPU/Codec or Codec2Codec. - # ports is below port: $ref: audio-graph-port.yaml#/definitions/port-base diff --git a/sys/contrib/device-tree/Bindings/sound/renesas,rz-ssi.yaml b/sys/contrib/device-tree/Bindings/sound/renesas,rz-ssi.yaml index f4610eaed1e1..e4cdbf2202b9 100644 --- a/sys/contrib/device-tree/Bindings/sound/renesas,rz-ssi.yaml +++ b/sys/contrib/device-tree/Bindings/sound/renesas,rz-ssi.yaml @@ -19,6 +19,7 @@ properties: - renesas,r9a07g043-ssi # RZ/G2UL and RZ/Five - renesas,r9a07g044-ssi # RZ/G2{L,LC} - renesas,r9a07g054-ssi # RZ/V2L + - renesas,r9a08g045-ssi # RZ/G3S - const: renesas,rz-ssi reg: @@ -57,24 +58,6 @@ properties: dmas: minItems: 1 maxItems: 2 - description: - The first cell represents a phandle to dmac. - The second cell specifies the encoded MID/RID values of the SSI port - connected to the DMA client and the slave channel configuration - parameters. - bits[0:9] - Specifies MID/RID value of a SSI channel as below - MID/RID value of SSI rx0 = 0x256 - MID/RID value of SSI tx0 = 0x255 - MID/RID value of SSI rx1 = 0x25a - MID/RID value of SSI tx1 = 0x259 - MID/RID value of SSI rt2 = 0x25f - MID/RID value of SSI rx3 = 0x262 - MID/RID value of SSI tx3 = 0x261 - bit[10] - HIEN = 1, Detects a request in response to the rising edge - of the signal - bit[11] - LVL = 0, Detects based on the edge - bits[12:14] - AM = 2, Bus cycle mode - bit[15] - TM = 0, Single transfer mode dma-names: oneOf: diff --git a/sys/contrib/device-tree/Bindings/sound/richtek,rt9123.yaml b/sys/contrib/device-tree/Bindings/sound/richtek,rt9123.yaml new file mode 100644 index 000000000000..819ca06203b1 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/richtek,rt9123.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/richtek,rt9123.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9123/RTQ9124 Audio Amplifier + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: + RT9123 is a 3.2W mono Class-D audio amplifier that features high efficiency + and performance with ultra-low quiescent current. The digital audio interface + support various formats, including I2S, left-justified, right-justified, and + TDM formats. + + RTQ9124 is an ultra-low output noise, digital input, mono-channel Class-D + power amplifier that supports a 2.1MHz switching frequency. It integrates + both DC and AC load diagnostics, as well as real-time load monitoring to + assess speaker condition. The device operates from 4.5V to 18V and delivers + up to 30W output power. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - richtek,rt9123 + - richtek,rtq9124 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + amplifier@5e { + compatible = "richtek,rt9123"; + reg = <0x5e>; + enable-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/richtek,rt9123p.yaml b/sys/contrib/device-tree/Bindings/sound/richtek,rt9123p.yaml new file mode 100644 index 000000000000..693511dfdda4 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/richtek,rt9123p.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/richtek,rt9123p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9123P Audio Amplifier + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: + RT9123P is a RT9123 variant which does not support I2C control. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - richtek,rt9123p + + '#sound-dai-cells': + const: 0 + + enable-gpios: + maxItems: 1 + + enable-delay-ms: + description: + Delay time for 'ENABLE' pin changes intended to make I2S clocks ready to + prevent speaker pop noise. The unit is in millisecond. + +required: + - compatible + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + amplifier { + compatible = "richtek,rt9123p"; + enable-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/rockchip,rk3036-codec.yaml b/sys/contrib/device-tree/Bindings/sound/rockchip,rk3036-codec.yaml new file mode 100644 index 000000000000..7570cc1375ca --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/rockchip,rk3036-codec.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,rk3036-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3036 internal codec + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: rockchip,rk3036-codec + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for audio codec + + clock-names: + items: + - const: acodec_pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - rockchip,grf + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3036-cru.h> + acodec: audio-codec@20030000 { + compatible = "rockchip,rk3036-codec"; + reg = <0x20030000 0x4000>; + rockchip,grf = <&grf>; + clock-names = "acodec_pclk"; + clocks = <&cru ACLK_VCODEC>; + #sound-dai-cells = <0>; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/rockchip,rk3576-sai.yaml b/sys/contrib/device-tree/Bindings/sound/rockchip,rk3576-sai.yaml new file mode 100644 index 000000000000..149da9a91451 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/rockchip,rk3576-sai.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,rk3576-sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Serial Audio Interface Controller + +description: + The Rockchip Serial Audio Interface (SAI) controller is a flexible audio + controller that implements the I2S, I2S/TDM and the PDM standards. + +maintainers: + - Nicolas Frattaroli <nicolas.frattaroli@collabora.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: rockchip,rk3576-sai + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - enum: [tx, rx] + - const: rx + + clocks: + items: + - description: master audio clock + - description: AHB clock driving the interface + + clock-names: + items: + - const: mclk + - const: hclk + + resets: + minItems: 1 + items: + - description: reset for the mclk domain + - description: reset for the hclk domain + + reset-names: + minItems: 1 + items: + - const: m + - const: h + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + + power-domains: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + rockchip,sai-rx-route: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Defines the mapping of the controller's SDI ports to actual input lanes, + as well as the number of input lanes. + rockchip,sai-rx-route = <3> would mean sdi3 is receiving from data0, and + that there is only one receiving lane. + This property's absence is to be understood as only one receiving lane + being used if the controller has capture capabilities. + maxItems: 4 + items: + minimum: 0 + maximum: 3 + + rockchip,sai-tx-route: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Defines the mapping of the controller's SDO ports to actual output lanes, + as well as the number of output lanes. + rockchip,sai-tx-route = <3> would mean sdo3 is sending to data0, and + that there is only one transmitting lane. + This property's absence is to be understood as only one transmitting lane + being used if the controller has playback capabilities. + maxItems: 4 + items: + minimum: 0 + maximum: 3 + +required: + - compatible + - reg + - dmas + - dma-names + - clocks + - clock-names + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3576-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/power/rockchip,rk3576-power.h> + #include <dt-bindings/reset/rockchip,rk3576-cru.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + sai1: sai@2a610000 { + compatible = "rockchip,rk3576-sai"; + reg = <0x0 0x2a610000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_SAI1_8CH>, <&cru HCLK_SAI1_8CH>; + clock-names = "mclk", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3576_PD_AUDIO>; + resets = <&cru SRST_M_SAI1_8CH>, <&cru SRST_H_SAI1_8CH>; + reset-names = "m", "h"; + pinctrl-names = "default"; + pinctrl-0 = <&sai1m0_lrck + &sai1m0_sclk + &sai1m0_sdi0 + &sai1m0_sdo0 + &sai1m0_sdo1 + &sai1m0_sdo2 + &sai1m0_sdo3>; + rockchip,sai-tx-route = <3 1 2 0>; + #sound-dai-cells = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/rockchip-spdif.yaml b/sys/contrib/device-tree/Bindings/sound/rockchip-spdif.yaml index c3c989ef2a2c..32dea7392e8d 100644 --- a/sys/contrib/device-tree/Bindings/sound/rockchip-spdif.yaml +++ b/sys/contrib/device-tree/Bindings/sound/rockchip-spdif.yaml @@ -31,6 +31,10 @@ properties: - rockchip,rk3288-spdif - rockchip,rk3308-spdif - const: rockchip,rk3066-spdif + - items: + - enum: + - rockchip,rk3588-spdif + - const: rockchip,rk3568-spdif reg: maxItems: 1 diff --git a/sys/contrib/device-tree/Bindings/sound/simple-audio-mux.yaml b/sys/contrib/device-tree/Bindings/sound/simple-audio-mux.yaml index 194ac1d4f4f5..9b1bda4852e1 100644 --- a/sys/contrib/device-tree/Bindings/sound/simple-audio-mux.yaml +++ b/sys/contrib/device-tree/Bindings/sound/simple-audio-mux.yaml @@ -29,6 +29,10 @@ properties: $ref: /schemas/types.yaml#/definitions/string-array maxItems: 2 + idle-state: + description: If present specifies the state when the mux is powered down + $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state + sound-name-prefix: true required: @@ -43,4 +47,5 @@ examples: compatible = "simple-audio-mux"; mux-gpios = <&gpio 3 0>; state-labels = "Label_A", "Label_B"; + idle-state = <0>; }; diff --git a/sys/contrib/device-tree/Bindings/sound/simple-card.yaml b/sys/contrib/device-tree/Bindings/sound/simple-card.yaml index 59ac2d1d1ccf..533d0a1da56e 100644 --- a/sys/contrib/device-tree/Bindings/sound/simple-card.yaml +++ b/sys/contrib/device-tree/Bindings/sound/simple-card.yaml @@ -207,8 +207,14 @@ properties: simple-audio-card,pin-switches: $ref: "#/definitions/pin-switches" simple-audio-card,hp-det-gpio: + deprecated: true + maxItems: 1 + simple-audio-card,hp-det-gpios: maxItems: 1 simple-audio-card,mic-det-gpio: + deprecated: true + maxItems: 1 + simple-audio-card,mic-det-gpios: maxItems: 1 patternProperties: @@ -256,8 +262,14 @@ patternProperties: pin-switches: $ref: "#/definitions/pin-switches" hp-det-gpio: + deprecated: true + maxItems: 1 + hp-det-gpios: maxItems: 1 mic-det-gpio: + deprecated: true + maxItems: 1 + mic-det-gpios: maxItems: 1 patternProperties: diff --git a/sys/contrib/device-tree/Bindings/sound/sprd,pcm-platform.yaml b/sys/contrib/device-tree/Bindings/sound/sprd,pcm-platform.yaml new file mode 100644 index 000000000000..c15c01bbb884 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/sprd,pcm-platform.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/sprd,pcm-platform.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum DMA platform + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + const: sprd,pcm-platform + + dmas: + maxItems: 10 + + dma-names: + items: + - const: normal_p_l + - const: normal_p_r + - const: normal_c_l + - const: normal_c_r + - const: voice_c + - const: fast_p + - const: loop_c + - const: loop_p + - const: voip_c + - const: voip_p + +required: + - compatible + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + platform { + compatible = "sprd,pcm-platform"; + dmas = <&agcp_dma 1 1>, <&agcp_dma 2 2>, + <&agcp_dma 3 3>, <&agcp_dma 4 4>, + <&agcp_dma 5 5>, <&agcp_dma 6 6>, + <&agcp_dma 7 7>, <&agcp_dma 8 8>, + <&agcp_dma 9 9>, <&agcp_dma 10 10>; + dma-names = "normal_p_l", "normal_p_r", + "normal_c_l", "normal_c_r", + "voice_c", "fast_p", + "loop_c", "loop_p", + "voip_c", "voip_p"; + }; +... diff --git a/sys/contrib/device-tree/Bindings/sound/sprd,sc9860-mcdt.yaml b/sys/contrib/device-tree/Bindings/sound/sprd,sc9860-mcdt.yaml new file mode 100644 index 000000000000..3b66bedeff97 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/sprd,sc9860-mcdt.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/sprd,sc9860-mcdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum Multi-Channel Data Transfer controller + +description: + The Multi-channel data transfer controller is used for sound stream + transmission between the audio subsystem and other AP/CP subsystem. It + supports 10 DAC channels and 10 ADC channels, and each channel can be + configured with DMA mode or interrupt mode. + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + const: sprd,sc9860-mcdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mcdt@41490000 { + compatible = "sprd,sc9860-mcdt"; + reg = <0x41490000 0x170>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/sys/contrib/device-tree/Bindings/sound/st,stm32-i2s.yaml b/sys/contrib/device-tree/Bindings/sound/st,stm32-i2s.yaml index 8978f6bd63e5..b4f44f9c7c7d 100644 --- a/sys/contrib/device-tree/Bindings/sound/st,stm32-i2s.yaml +++ b/sys/contrib/device-tree/Bindings/sound/st,stm32-i2s.yaml @@ -13,13 +13,11 @@ description: The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode. Only some SPI instances support I2S. -allOf: - - $ref: dai-common.yaml# - properties: compatible: enum: - st,stm32h7-i2s + - st,stm32mp25-i2s "#sound-dai-cells": const: 0 @@ -33,6 +31,7 @@ properties: - description: clock feeding the internal clock generator. - description: I2S parent clock for sampling rates multiple of 8kHz. - description: I2S parent clock for sampling rates multiple of 11.025kHz. + minItems: 2 clock-names: items: @@ -40,6 +39,7 @@ properties: - const: i2sclk - const: x8k - const: x11k + minItems: 2 interrupts: maxItems: 1 @@ -79,6 +79,36 @@ required: - dmas - dma-names +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + const: st,stm32h7-i2s + + then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + + - if: + properties: + compatible: + contains: + const: st,stm32mp25-i2s + + then: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + unevaluatedProperties: false examples: diff --git a/sys/contrib/device-tree/Bindings/sound/st,stm32-sai.yaml b/sys/contrib/device-tree/Bindings/sound/st,stm32-sai.yaml index 68f97b462598..4a7129d0b157 100644 --- a/sys/contrib/device-tree/Bindings/sound/st,stm32-sai.yaml +++ b/sys/contrib/device-tree/Bindings/sound/st,stm32-sai.yaml @@ -20,6 +20,7 @@ properties: enum: - st,stm32f4-sai - st,stm32h7-sai + - st,stm32mp25-sai reg: items: @@ -43,9 +44,11 @@ properties: const: 1 clocks: + minItems: 1 maxItems: 3 clock-names: + minItems: 1 maxItems: 3 access-controllers: @@ -156,7 +159,13 @@ allOf: items: - const: x8k - const: x11k - else: + + - if: + properties: + compatible: + contains: + const: st,stm32mph7-sai + then: properties: clocks: items: @@ -170,6 +179,21 @@ allOf: - const: x8k - const: x11k + - if: + properties: + compatible: + contains: + const: st,stm32mp25-sai + then: + properties: + clocks: + items: + - description: pclk feeds the peripheral bus interface. + + clock-names: + items: + - const: pclk + additionalProperties: false examples: diff --git a/sys/contrib/device-tree/Bindings/sound/st,stm32-spdifrx.yaml b/sys/contrib/device-tree/Bindings/sound/st,stm32-spdifrx.yaml index 3dedc81ec12f..56c5738ea4c5 100644 --- a/sys/contrib/device-tree/Bindings/sound/st,stm32-spdifrx.yaml +++ b/sys/contrib/device-tree/Bindings/sound/st,stm32-spdifrx.yaml @@ -50,6 +50,10 @@ properties: resets: maxItems: 1 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + access-controllers: minItems: 1 maxItems: 2 diff --git a/sys/contrib/device-tree/Bindings/sound/ti,pcm1681.yaml b/sys/contrib/device-tree/Bindings/sound/ti,pcm1681.yaml index 5aa00617291c..1f0e6787a746 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,pcm1681.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,pcm1681.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/sound/ti,pcm1681.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments PCM1681 8-channel PWM Processor +title: Texas Instruments PCM1681 8-channel Digital-to-Analog Converter maintainers: - Shenghao Ding <shenghao-ding@ti.com> diff --git a/sys/contrib/device-tree/Bindings/sound/ti,pcm6240.yaml b/sys/contrib/device-tree/Bindings/sound/ti,pcm6240.yaml index dd5b08e3d7a1..d89b4255b51c 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,pcm6240.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,pcm6240.yaml @@ -159,19 +159,21 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - /* example for two devices with interrupt support */ - #address-cells = <1>; - #size-cells = <0>; - pcm6240: audio-codec@48 { - compatible = "ti,pcm6240"; - reg = <0x48>, /* primary-device */ - <0x4b>; /* secondary-device */ - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&gpio1>; - interrupts = <15>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + /* example for two devices with interrupt support */ + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@48 { + compatible = "ti,pcm6240"; + reg = <0x48>, /* primary-device */ + <0x4b>; /* secondary-device */ + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/ti,tas2562.yaml b/sys/contrib/device-tree/Bindings/sound/ti,tas2562.yaml index 8bc3b0c7531e..3763ca16b91f 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,tas2562.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,tas2562.yaml @@ -65,17 +65,19 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@4c { - compatible = "ti,tas2562"; - reg = <0x4c>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - shutdown-gpios = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@4c { + compatible = "ti,tas2562"; + reg = <0x4c>; + #sound-dai-cells = <0>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + ti,imon-slot-no = <0>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/ti,tas2770.yaml b/sys/contrib/device-tree/Bindings/sound/ti,tas2770.yaml index 362c2e6154f0..8eab98a0f7a2 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,tas2770.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,tas2770.yaml @@ -23,6 +23,7 @@ properties: compatible: enum: - ti,tas2770 + - ti,tas5770l # Apple variant reg: maxItems: 1 @@ -69,19 +70,21 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@41 { - compatible = "ti,tas2770"; - reg = <0x41>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - reset-gpio = <&gpio1 15 0>; - shutdown-gpios = <&gpio1 14 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@41 { + compatible = "ti,tas2770"; + reg = <0x41>; + #sound-dai-cells = <0>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/sound/ti,tas2781.yaml b/sys/contrib/device-tree/Bindings/sound/ti,tas2781.yaml index 976238689249..5ea1cdc593b5 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,tas2781.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,tas2781.yaml @@ -101,22 +101,24 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - /* example with quad tas2781s, such as tablet or pad device */ - #address-cells = <1>; - #size-cells = <0>; - quad_tas2781: tas2781@38 { - compatible = "ti,tas2781"; - reg = <0x38>, /* Audio slot 0 */ - <0x3a>, /* Audio slot 1 */ - <0x39>, /* Audio slot 2 */ - <0x3b>; /* Audio slot 3 */ - - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&gpio1>; - interrupts = <15>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + /* example with quad tas2781s, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>, /* Audio slot 0 */ + <0x3a>, /* Audio slot 1 */ + <0x39>, /* Audio slot 2 */ + <0x3b>; /* Audio slot 3 */ + + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/ti,tas27xx.yaml b/sys/contrib/device-tree/Bindings/sound/ti,tas27xx.yaml index 530bc3937847..fcaae848e78a 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,tas27xx.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,tas27xx.yaml @@ -24,6 +24,7 @@ properties: enum: - ti,tas2764 - ti,tas2780 + - ti,sn012776 # Apple variant of TAS2764 reg: maxItems: 1 @@ -62,21 +63,23 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@38 { - compatible = "ti,tas2764"; - reg = <0x38>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - reset-gpios = <&gpio1 15 0>; - shutdown-gpios = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@38 { + compatible = "ti,tas2764"; + reg = <0x38>; + #sound-dai-cells = <0>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/ti,tas57xx.yaml b/sys/contrib/device-tree/Bindings/sound/ti,tas57xx.yaml index 2f917238db95..0b013a34e2c1 100644 --- a/sys/contrib/device-tree/Bindings/sound/ti,tas57xx.yaml +++ b/sys/contrib/device-tree/Bindings/sound/ti,tas57xx.yaml @@ -18,6 +18,7 @@ properties: - ti,tas5719 - ti,tas5721 - ti,tas5733 + - ti,tas5753 reg: maxItems: 1 @@ -98,6 +99,7 @@ allOf: contains: enum: - ti,tas5721 + - ti,tas5753 then: properties: HPVDD-supply: false @@ -112,22 +114,24 @@ unevaluatedProperties: false examples: - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@2a { - compatible = "ti,tas5717"; - reg = <0x2a>; - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 15 0>; - pdn-gpios = <&gpio1 15 0>; - AVDD-supply = <&avdd_supply>; - DVDD-supply = <&dvdd_supply>; - HPVDD-supply = <&hpvdd_supply>; - PVDD_AB-supply = <&pvdd_ab_supply>; - PVDD_CD-supply = <&pvdd_cd_supply>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@2a { + compatible = "ti,tas5717"; + reg = <0x2a>; + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pdn-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + AVDD-supply = <&avdd_supply>; + DVDD-supply = <&dvdd_supply>; + HPVDD-supply = <&hpvdd_supply>; + PVDD_AB-supply = <&pvdd_ab_supply>; + PVDD_CD-supply = <&pvdd_cd_supply>; + }; + }; ... diff --git a/sys/contrib/device-tree/Bindings/sound/wlf,wm8904.yaml b/sys/contrib/device-tree/Bindings/sound/wlf,wm8904.yaml index 329260cf0fa0..3029a868e5e1 100644 --- a/sys/contrib/device-tree/Bindings/sound/wlf,wm8904.yaml +++ b/sys/contrib/device-tree/Bindings/sound/wlf,wm8904.yaml @@ -38,6 +38,82 @@ properties: DCVDD-supply: true MICVDD-supply: true + wlf,in1l-as-dmicdat1: + type: boolean + description: + Use IN1L/DMICDAT1 as DMICDAT1, enabling the DMIC input path. + Can be used separately or together with wlf,in1r-as-dmicdat2. + + wlf,in1r-as-dmicdat2: + type: boolean + description: + Use IN1R/DMICDAT2 as DMICDAT2, enabling the DMIC input path. + Can be used separately or together with wlf,in1l-as-dmicdat1. + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + description: + Default register values for R121/122/123/124 (GPIO Control). + If any entry has the value 0xFFFF, the related register won't be set. + default: [0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF] + + wlf,micbias-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: + Default register values for R6/R7 (Mic Bias Control). + default: [0, 0] + + wlf,drc-cfg-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + List of strings for the available DRC modes. + If absent, DRC is disabled. + + wlf,drc-cfg-regs: + $ref: /schemas/types.yaml#/definitions/uint16-matrix + description: + Sets of default register values for R40/41/42/43 (DRC). + Each set corresponds to a DRC mode, so the number of sets should equal + the length of wlf,drc-cfg-names. + If absent, DRC is disabled. + items: + minItems: 4 + maxItems: 4 + + wlf,retune-mobile-cfg-names: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + List of strings for the available retune modes. + If absent, retune is disabled. + + wlf,retune-mobile-cfg-hz: + description: + The list must be the same length as wlf,retune-mobile-cfg-names. + If absent, retune is disabled. + + wlf,retune-mobile-cfg-regs: + $ref: /schemas/types.yaml#/definitions/uint16-matrix + description: + Sets of default register values for R134/.../157 (EQ). + Each set corresponds to a retune mode, so the number of sets should equal + the length of wlf,retune-mobile-cfg-names. + If absent, retune is disabled. + items: + minItems: 24 + maxItems: 24 + +dependencies: + wlf,drc-cfg-names: [ 'wlf,drc-cfg-regs' ] + wlf,drc-cfg-regs: [ 'wlf,drc-cfg-names' ] + + wlf,retune-mobile-cfg-names: [ 'wlf,retune-mobile-cfg-hz', 'wlf,retune-mobile-cfg-regs' ] + wlf,retune-mobile-cfg-regs: [ 'wlf,retune-mobile-cfg-names', 'wlf,retune-mobile-cfg-hz' ] + wlf,retune-mobile-cfg-hz: [ 'wlf,retune-mobile-cfg-names', 'wlf,retune-mobile-cfg-regs' ] + required: - compatible - reg @@ -70,5 +146,58 @@ examples: DBVDD-supply = <®_1p8v>; DCVDD-supply = <®_1p8v>; MICVDD-supply = <®_1p8v>; + + wlf,drc-cfg-names = "default", "peaklimiter", "tradition", "soft", + "music"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1 + * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1 + * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>, + /bits/ 16 <0x04af 0x324b 0x0028 0x0704>, + /bits/ 16 <0x04af 0x324b 0x0018 0x078c>, + /bits/ 16 <0x04af 0x324b 0x0010 0x050e>; + + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + + /* Use IN1R as DMICDAT2, leave IN1L as an analog input path */ + wlf,in1r-as-dmicdat2; + + wlf,retune-mobile-cfg-names = "bassboost", "bassboost", "treble"; + wlf,retune-mobile-cfg-hz = <48000>, <44100>, <48000>; + /* + * Config registers per name, respectively: + * EQ_ENA, 100 Hz, 300 Hz, 875 Hz, 2400 Hz, 6900 Hz + * 1, +6 dB, +3 dB, 0 dB, 0 dB, 0 dB + * 1, +6 dB, +3 dB, 0 dB, 0 dB, 0 dB + * 1, -2 dB, -2 dB, 0 dB, 0 dB, +3 dB + * Each one uses the defaults for ReTune Mobile registers 140-157 + */ + wlf,retune-mobile-cfg-regs = /bits/ 16 <0x1 0x12 0xf 0xc 0xc 0xc + 0x0fca 0x0400 0x00d8 0x1eb5 + 0xf145 0x0bd5 0x0075 0x1c58 + 0xf3d3 0x0a54 0x0568 0x168e + 0xf829 0x07ad 0x1103 0x0564 + 0x0559 0x4000>, + + /bits/ 16 <0x1 0x12 0xf 0xc 0xc 0xc + 0x0fca 0x0400 0x00d8 0x1eb5 + 0xf145 0x0bd5 0x0075 0x1c58 + 0xf3d3 0x0a54 0x0568 0x168e + 0xf829 0x07ad 0x1103 0x0564 + 0x0559 0x4000>, + + /bits/ 16 <0x1 0xa 0xa 0xc 0xc 0xf + 0x0fca 0x0400 0x00d8 0x1eb5 + 0xf145 0x0bd5 0x0075 0x1c58 + 0xf3d3 0x0a54 0x0568 0x168e + 0xf829 0x07ad 0x1103 0x0564 + 0x0559 0x4000>; }; }; diff --git a/sys/contrib/device-tree/Bindings/sound/wlf,wm8960.yaml b/sys/contrib/device-tree/Bindings/sound/wlf,wm8960.yaml index 62e62c335d07..3c2b9790ffcf 100644 --- a/sys/contrib/device-tree/Bindings/sound/wlf,wm8960.yaml +++ b/sys/contrib/device-tree/Bindings/sound/wlf,wm8960.yaml @@ -75,6 +75,10 @@ properties: enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for captrue. + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg diff --git a/sys/contrib/device-tree/Bindings/sound/xlnx,audio-formatter.yaml b/sys/contrib/device-tree/Bindings/sound/xlnx,audio-formatter.yaml new file mode 100644 index 000000000000..82fa448bd2e9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/xlnx,audio-formatter.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/xlnx,audio-formatter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx PL audio formatter + +description: + The IP core supports DMA, data formatting(AES<->PCM conversion) + of audio samples. + +maintainers: + - Vincenzo Frascino <vincenzo.frascino@arm.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - xlnx,audio-formatter-1.0 + + reg: + maxItems: 1 + + interrupt-names: + minItems: 1 + items: + - const: irq_mm2s + - const: irq_s2mm + + interrupts: + minItems: 1 + items: + - description: interrupt from MM2S block + - description: interrupt from S2MM block + + clock-names: + minItems: 1 + items: + - const: s_axi_lite_aclk + - const: aud_mclk + + clocks: + minItems: 1 + items: + - description: clock for the axi data stream + - description: clock for the MEMS microphone data stream + +required: + - compatible + - reg + - interrupt-names + - interrupts + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + audio_formatter@80010000 { + compatible = "xlnx,audio-formatter-1.0"; + reg = <0x80010000 0x1000>; + interrupt-names = "irq_mm2s", "irq_s2mm"; + interrupt-parent = <&gic>; + interrupts = <0 104 4>, <0 105 4>; + clock-names = "s_axi_lite_aclk", "aud_mclk"; + clocks = <&clk 71>, <&clk_wiz_1 0>; + }; +... diff --git a/sys/contrib/device-tree/Bindings/sound/xlnx,i2s.yaml b/sys/contrib/device-tree/Bindings/sound/xlnx,i2s.yaml new file mode 100644 index 000000000000..3c2b0be07c53 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/xlnx,i2s.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/xlnx,i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx I2S PL block + +description: + The IP supports I2S based playback/capture audio. + +maintainers: + - Vincenzo Frascino <vincenzo.frascino@arm.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - xlnx,i2s-receiver-1.0 + - xlnx,i2s-transmitter-1.0 + + reg: + maxItems: 1 + + xlnx,dwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 16 + - 24 + description: | + Sample data width. + + xlnx,num-channels: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + description: | + Number of I2S streams. + +required: + - compatible + - reg + - xlnx,dwidth + - xlnx,num-channels + +additionalProperties: false + +examples: + - | + i2s@a0080000 { + compatible = "xlnx,i2s-receiver-1.0"; + reg = <0xa0080000 0x10000>; + xlnx,dwidth = <0x18>; + xlnx,num-channels = <1>; + }; + i2s@a0090000 { + compatible = "xlnx,i2s-transmitter-1.0"; + reg = <0xa0090000 0x10000>; + xlnx,dwidth = <0x18>; + xlnx,num-channels = <1>; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/sound/xlnx,spdif.yaml b/sys/contrib/device-tree/Bindings/sound/xlnx,spdif.yaml new file mode 100644 index 000000000000..a45d8a0755fe --- /dev/null +++ b/sys/contrib/device-tree/Bindings/sound/xlnx,spdif.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/xlnx,spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SPDIF IP + +description: + The IP supports playback and capture of SPDIF audio. + +maintainers: + - Vincenzo Frascino <vincenzo.frascino@arm.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - xlnx,spdif-2.0 + + reg: + maxItems: 1 + + interrupts: + items: + - description: SPDIF audio interrupt + + clock-names: + items: + - const: aud_clk_i + - const: s_axi_aclk + + clocks: + minItems: 1 + items: + - description: input audio clock + - description: clock for the AXI data stream + + xlnx,spdif-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + description: | + 0 - receiver + 1 - transmitter + + xlnx,aud_clk_i: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input audio clock frequency. It affects the sampling rate. + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + spdif@80010000 { + compatible = "xlnx,spdif-2.0"; + reg = <0x80010000 0x10000>; + clock-names = "aud_clk_i", "s_axi_aclk"; + clocks = <&misc_clk_0>, <&clk 71>; + interrupt-parent = <&gic>; + interrupts = <0 91 4>; + xlnx,spdif-mode = <1>; + xlnx,aud_clk_i = <49152913>; + }; + +... |