diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi | 87 |
1 files changed, 86 insertions, 1 deletions
diff --git a/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi b/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi index 5ac1cc9ff50e..fa054bfe7d5c 100644 --- a/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi +++ b/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi @@ -3,7 +3,7 @@ * NXP S32G2 SoC family * * Copyright (c) 2021 SUSE LLC - * Copyright (c) 2017-2021 NXP + * Copyright 2017-2021, 2024 NXP */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -14,6 +14,18 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scmi_buf: shm@d0000000 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0xd0000000 0x0 0x80>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -77,6 +89,19 @@ }; firmware { + scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0xc20000fe>; + #address-cells = <1>; + #size-cells = <0>; + shmem = <&scmi_buf>; + + clks: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -89,6 +114,56 @@ #size-cells = <1>; ranges = <0 0 0 0x80000000>; + pinctrl: pinctrl@4009c240 { + compatible = "nxp,s32g2-siul2-pinctrl"; + /* MSCR0-MSCR101 registers on siul2_0 */ + reg = <0x4009c240 0x198>, + /* MSCR112-MSCR122 registers on siul2_1 */ + <0x44010400 0x2c>, + /* MSCR144-MSCR190 registers on siul2_1 */ + <0x44010480 0xbc>, + /* IMCR0-IMCR83 registers on siul2_0 */ + <0x4009ca40 0x150>, + /* IMCR119-IMCR397 registers on siul2_1 */ + <0x44010c1c 0x45c>, + /* IMCR430-IMCR495 registers on siul2_1 */ + <0x440110f8 0x108>; + + jtag_pins: jtag-pins { + jtag-grp0 { + pinmux = <0x0>; + input-enable; + bias-pull-up; + slew-rate = <166>; + }; + + jtag-grp1 { + pinmux = <0x11>; + slew-rate = <166>; + }; + + jtag-grp2 { + pinmux = <0x40>; + input-enable; + bias-pull-down; + slew-rate = <166>; + }; + + jtag-grp3 { + pinmux = <0x23c0>, + <0x23d0>, + <0x2320>; + }; + + jtag-grp4 { + pinmux = <0x51>; + input-enable; + bias-pull-up; + slew-rate = <166>; + }; + }; + }; + uart0: serial@401c8000 { compatible = "nxp,s32g2-linflexuart", "fsl,s32v234-linflexuart"; @@ -113,6 +188,16 @@ status = "disabled"; }; + usdhc0: mmc@402f0000 { + compatible = "nxp,s32g2-usdhc"; + reg = <0x402f0000 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 32>, <&clks 31>, <&clks 33>; + clock-names = "ipg", "ahb", "per"; + bus-width = <8>; + status = "disabled"; + }; + gic: interrupt-controller@50800000 { compatible = "arm,gic-v3"; reg = <0x50800000 0x10000>, |