aboutsummaryrefslogtreecommitdiff
path: root/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi')
-rw-r--r--sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi403
1 files changed, 403 insertions, 0 deletions
diff --git a/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi b/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi
index fa054bfe7d5c..09d2fbbe1d8c 100644
--- a/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi
+++ b/sys/contrib/device-tree/src/arm64/freescale/s32g2.dtsi
@@ -114,6 +114,14 @@
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ rtc0: rtc@40060000 {
+ compatible = "nxp,s32g2-rtc";
+ reg = <0x40060000 0x1000>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 54>, <&clks 55>;
+ clock-names = "ipg", "source0";
+ };
+
pinctrl: pinctrl@4009c240 {
compatible = "nxp,s32g2-siul2-pinctrl";
/* MSCR0-MSCR101 registers on siul2_0 */
@@ -162,6 +170,202 @@
slew-rate = <166>;
};
};
+
+ pinctrl_usdhc0: usdhc0grp-pins {
+ usdhc0-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+ usdhc0-100mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+ usdhc0-200mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+ };
+
+ edma0: dma-controller@40144000 {
+ compatible = "nxp,s32g2-edma";
+ reg = <0x40144000 0x24000>,
+ <0x4012c000 0x3000>,
+ <0x40130000 0x3000>;
+ #dma-cells = <2>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-0-15",
+ "tx-16-31",
+ "err";
+ clocks = <&clks 63>, <&clks 64>;
+ clock-names = "dmamux0", "dmamux1";
+ };
+
+ can0: can@401b4000 {
+ compatible = "nxp,s32g2-flexcan";
+ reg = <0x401b4000 0xa000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mb-0", "state", "berr", "mb-1";
+ clocks = <&clks 9>, <&clks 11>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@401be000 {
+ compatible = "nxp,s32g2-flexcan";
+ reg = <0x401be000 0xa000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mb-0", "state", "berr", "mb-1";
+ clocks = <&clks 9>, <&clks 11>;
+ clock-names = "ipg", "per";
+ status = "disabled";
};
uart0: serial@401c8000 {
@@ -180,6 +384,144 @@
status = "disabled";
};
+ usbmisc: usbmisc@44064200 {
+ #index-cells = <1>;
+ compatible = "nxp,s32g2-usbmisc";
+ reg = <0x44064200 0x200>;
+ };
+
+ usbotg: usb@44064000 {
+ compatible = "nxp,s32g2-usb";
+ reg = <0x44064000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+ clocks = <&clks 94>, <&clks 95>;
+ fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x3>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ phy_type = "ulpi";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ status = "disabled";
+ };
+
+ spi0: spi@401d4000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x401d4000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <8>;
+ bus-num = <0>;
+ dmas = <&edma0 0 7>, <&edma0 0 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi1: spi@401d8000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x401d8000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <1>;
+ dmas = <&edma0 0 10>, <&edma0 0 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi2: spi@401dc000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x401dc000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <2>;
+ dmas = <&edma0 0 13>, <&edma0 0 14>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c0: i2c@401e4000 {
+ compatible = "nxp,s32g2-i2c";
+ reg = <0x401e4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 40>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ i2c1: i2c@401e8000 {
+ compatible = "nxp,s32g2-i2c";
+ reg = <0x401e8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 40>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ i2c2: i2c@401ec000 {
+ compatible = "nxp,s32g2-i2c";
+ reg = <0x401ec000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 40>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ edma1: dma-controller@40244000 {
+ compatible = "nxp,s32g2-edma";
+ reg = <0x40244000 0x24000>,
+ <0x4022c000 0x3000>,
+ <0x40230000 0x3000>;
+ #dma-cells = <2>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-0-15",
+ "tx-16-31",
+ "err";
+ clocks = <&clks 63>, <&clks 64>;
+ clock-names = "dmamux0", "dmamux1";
+ };
+
+ can2: can@402a8000 {
+ compatible = "nxp,s32g2-flexcan";
+ reg = <0x402a8000 0xa000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mb-0", "state", "berr", "mb-1";
+ clocks = <&clks 9>, <&clks 11>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can3: can@402b2000 {
+ compatible = "nxp,s32g2-flexcan";
+ reg = <0x402b2000 0xa000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mb-0", "state", "berr", "mb-1";
+ clocks = <&clks 9>, <&clks 11>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
uart2: serial@402bc000 {
compatible = "nxp,s32g2-linflexuart",
"fsl,s32v234-linflexuart";
@@ -188,6 +530,67 @@
status = "disabled";
};
+ spi3: spi@402c8000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x402c8000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <3>;
+ dmas = <&edma0 1 7>, <&edma0 1 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi4: spi@402cc000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x402cc000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <4>;
+ dmas = <&edma0 1 10>, <&edma0 1 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi5: spi@402d0000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x402d0000 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <5>;
+ dmas = <&edma0 1 13>, <&edma0 1 14>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@402d8000 {
+ compatible = "nxp,s32g2-i2c";
+ reg = <0x402d8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 40>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ i2c4: i2c@402dc000 {
+ compatible = "nxp,s32g2-i2c";
+ reg = <0x402dc000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 40>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
usdhc0: mmc@402f0000 {
compatible = "nxp,s32g2-usdhc";
reg = <0x402f0000 0x1000>;
generated by cgit v1.2.3 (git 2.25.1) at 2025-11-26 03:54:47 +0000