diff options
Diffstat (limited to 'sys/contrib/device-tree/src/riscv/thead/th1520.dtsi')
| -rw-r--r-- | sys/contrib/device-tree/src/riscv/thead/th1520.dtsi | 173 |
1 files changed, 157 insertions, 16 deletions
diff --git a/sys/contrib/device-tree/src/riscv/thead/th1520.dtsi b/sys/contrib/device-tree/src/riscv/thead/th1520.dtsi index 6992060e6a54..03f1d7319049 100644 --- a/sys/contrib/device-tree/src/riscv/thead/th1520.dtsi +++ b/sys/contrib/device-tree/src/riscv/thead/th1520.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/thead,th1520-clk-ap.h> +#include <dt-bindings/power/thead,th1520-power.h> +#include <dt-bindings/reset/thead,th1520-reset.h> / { compatible = "thead,th1520"; @@ -216,6 +218,28 @@ #clock-cells = <0>; }; + aonsys_clk: clock-73728000 { + compatible = "fixed-clock"; + clock-frequency = <73728000>; + clock-output-names = "aonsys_clk"; + #clock-cells = <0>; + }; + + stmmac_axi_config: stmmac-axi-config { + snps,wr_osr_lmt = <15>; + snps,rd_osr_lmt = <15>; + snps,blen = <0 0 64 32 0 0 0>; + }; + + aon: aon { + compatible = "thead,th1520-aon"; + mboxes = <&mbox_910t 1>; + mbox-names = "aon"; + resets = <&rst TH1520_RESET_ID_GPU_CLKGEN>; + reset-names = "gpu-clkgen"; + #power-domain-cells = <1>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&plic>; @@ -267,6 +291,52 @@ status = "disabled"; }; + gmac1: ethernet@ffe7060000 { + compatible = "thead,th1520-gmac", "snps,dwmac-3.70a"; + reg = <0xff 0xe7060000 0x0 0x2000>, <0xff 0xec004000 0x0 0x1000>; + reg-names = "dwmac", "apb"; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>, + <&clk CLK_PERISYS_APB4_HCLK>; + clock-names = "stmmaceth", "pclk", "apb"; + snps,pbl = <32>; + snps,fixed-burst; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <32>; + snps,axi-config = <&stmmac_axi_config>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gmac0: ethernet@ffe7070000 { + compatible = "thead,th1520-gmac", "snps,dwmac-3.70a"; + reg = <0xff 0xe7070000 0x0 0x2000>, <0xff 0xec003000 0x0 0x1000>; + reg-names = "dwmac", "apb"; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>, + <&clk CLK_PERISYS_APB4_HCLK>; + clock-names = "stmmaceth", "pclk", "apb"; + snps,pbl = <32>; + snps,fixed-burst; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <32>; + snps,axi-config = <&stmmac_axi_config>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + emmc: mmc@ffe7080000 { compatible = "thead,th1520-dwcmshc"; reg = <0xff 0xe7080000 0x0 0x10000>; @@ -316,18 +386,20 @@ status = "disabled"; }; - gpio2: gpio@ffe7f34000 { + gpio@ffe7f34000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xe7f34000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_GPIO2>; + clock-names = "bus"; - portc: gpio-controller@0 { + gpio2: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; ngpios = <32>; + gpio-ranges = <&padctrl0_apsys 0 0 32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -335,18 +407,20 @@ }; }; - gpio3: gpio@ffe7f38000 { + gpio@ffe7f38000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xe7f38000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_GPIO3>; + clock-names = "bus"; - portd: gpio-controller@0 { + gpio3: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - ngpios = <32>; + ngpios = <23>; + gpio-ranges = <&padctrl0_apsys 0 32 23>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -354,18 +428,27 @@ }; }; - gpio0: gpio@ffec005000 { + padctrl1_apsys: pinctrl@ffe7f3c000 { + compatible = "thead,th1520-pinctrl"; + reg = <0xff 0xe7f3c000 0x0 0x1000>; + clocks = <&clk CLK_PADCTRL1>; + thead,pad-group = <2>; + }; + + gpio@ffec005000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xec005000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_GPIO0>; + clock-names = "bus"; - porta: gpio-controller@0 { + gpio0: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; ngpios = <32>; + gpio-ranges = <&padctrl1_apsys 0 0 32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -373,18 +456,20 @@ }; }; - gpio1: gpio@ffec006000 { + gpio@ffec006000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xec006000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_GPIO1>; + clock-names = "bus"; - portb: gpio-controller@0 { + gpio1: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - ngpios = <32>; + ngpios = <31>; + gpio-ranges = <&padctrl1_apsys 0 32 31>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -392,6 +477,13 @@ }; }; + padctrl0_apsys: pinctrl@ffec007000 { + compatible = "thead,th1520-pinctrl"; + reg = <0xff 0xec007000 0x0 0x1000>; + clocks = <&clk CLK_PADCTRL0>; + thead,pad-group = <3>; + }; + uart2: serial@ffec010000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xec010000 0x0 0x4000>; @@ -410,6 +502,19 @@ #clock-cells = <1>; }; + rst: reset-controller@ffef528000 { + compatible = "thead,th1520-reset"; + reg = <0xff 0xef528000 0x0 0x4f>; + #reset-cells = <1>; + }; + + clk_vo: clock-controller@ffef528050 { + compatible = "thead,th1520-clk-vo"; + reg = <0xff 0xef528050 0x0 0xfb0>; + clocks = <&clk CLK_VIDEO_PLL>; + #clock-cells = <1>; + }; + dmac0: dma-controller@ffefc00000 { compatible = "snps,axi-dma-1.01a"; reg = <0xff 0xefc00000 0x0 0x1000>; @@ -520,17 +625,34 @@ status = "disabled"; }; - ao_gpio0: gpio@fffff41000 { + mbox_910t: mailbox@ffffc38000 { + compatible = "thead,th1520-mbox"; + reg = <0xff 0xffc38000 0x0 0x6000>, + <0xff 0xffc40000 0x0 0x6000>, + <0xff 0xffc4c000 0x0 0x2000>, + <0xff 0xffc54000 0x0 0x2000>; + reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2"; + clocks = <&clk CLK_MBOX0>, <&clk CLK_MBOX1>, <&clk CLK_MBOX2>, + <&clk CLK_MBOX3>; + clock-names = "clk-local", "clk-remote-icu0", "clk-remote-icu1", + "clk-remote-icu2"; + interrupt-parent = <&plic>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + + gpio@fffff41000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xfff41000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; - porte: gpio-controller@0 { + aogpio: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - ngpios = <32>; + ngpios = <16>; + gpio-ranges = <&padctrl_aosys 0 9 16>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -538,17 +660,36 @@ }; }; - ao_gpio1: gpio@fffff52000 { + padctrl_aosys: pinctrl@fffff4a000 { + compatible = "thead,th1520-pinctrl"; + reg = <0xff 0xfff4a000 0x0 0x2000>; + clocks = <&aonsys_clk>; + thead,pad-group = <1>; + }; + + pvt: pvt@fffff4e000 { + compatible = "moortec,mr75203"; + reg = <0xff 0xfff4e000 0x0 0x80>, + <0xff 0xfff4e080 0x0 0x100>, + <0xff 0xfff4e180 0x0 0x680>, + <0xff 0xfff4e800 0x0 0x600>; + reg-names = "common", "ts", "pd", "vm"; + clocks = <&aonsys_clk>; + #thermal-sensor-cells = <1>; + }; + + gpio@fffff52000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xfff52000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; - portf: gpio-controller@0 { + gpio4: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - ngpios = <32>; + ngpios = <23>; + gpio-ranges = <&padctrl_aosys 0 25 22>, <&padctrl_aosys 22 7 1>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; |
