1 files changed, 64 insertions, 0 deletions
diff --git a/sys/contrib/openzfs/cmd/zed/zed.d/statechange-sync-slot_off.sh b/sys/contrib/openzfs/cmd/zed/zed.d/statechange-sync-slot_off.sh
new file mode 100755
index 000000000000..06acce93b8aa
--- /dev/null
+++ b/sys/contrib/openzfs/cmd/zed/zed.d/statechange-sync-slot_off.sh
@@ -0,0 +1,64 @@
+#!/bin/sh
+# shellcheck disable=SC3014,SC2154,SC2086,SC2034
+#
+# Turn off disk's enclosure slot if it becomes FAULTED.
+#
+# Bad SCSI disks can often "disappear and reappear" causing all sorts of chaos
+# as they flip between FAULTED and ONLINE.  If
+# ZED_POWER_OFF_ENCLOSURE_SLOT_ON_FAULT is set in zed.rc, and the disk gets
+# FAULTED, then power down the slot via sysfs:
+#
+# /sys/class/enclosure/<enclosure>/<slot>/power_status
+#
+# We assume the user will be responsible for turning the slot back on again.
+#
+# Note that this script requires that your enclosure be supported by the
+# Linux SCSI Enclosure services (SES) driver.  The script will do nothing
+# if you have no enclosure, or if your enclosure isn't supported.
+#
+# Exit codes:
+#   0: slot successfully powered off
+#   1: enclosure not available
+#   2: ZED_POWER_OFF_ENCLOSURE_SLOT_ON_FAULT disabled
+#   3: vdev was not FAULTED
+#   4: The enclosure sysfs path passed from ZFS does not exist
+#   5: Enclosure slot didn't actually turn off after we told it to
+
+[ -f "${ZED_ZEDLET_DIR}/zed.rc" ] && . "${ZED_ZEDLET_DIR}/zed.rc"
+. "${ZED_ZEDLET_DIR}/zed-functions.sh"
+
+if [ ! -d /sys/class/enclosure ] ; then
+	# No JBOD enclosure or NVMe slots
+	exit 1
+fi
+
+if [ "${ZED_POWER_OFF_ENCLOSURE_SLOT_ON_FAULT}" != "1" ] ; then
+	exit 2
+fi
+
+if [ "$ZEVENT_VDEV_STATE_STR" != "FAULTED" ] ; then
+	exit 3
+fi
+
+if [ ! -f "$ZEVENT_VDEV_ENC_SYSFS_PATH/power_status" ] ; then
+	exit 4
+fi
+
+# Turn off the slot and wait for sysfs to report that the slot is off.
+# It can take ~400ms on some enclosures and multiple retries may be needed.
+for i in $(seq 1 20) ; do
+	echo "off" | tee "$ZEVENT_VDEV_ENC_SYSFS_PATH/power_status"
+
+	for j in $(seq 1 5) ; do
+		if [ "$(cat $ZEVENT_VDEV_ENC_SYSFS_PATH/power_status)" == "off" ] ; then
+			break 2
+		fi
+		sleep 0.1
+	done
+done
+
+if [ "$(cat $ZEVENT_VDEV_ENC_SYSFS_PATH/power_status)" != "off" ] ; then
+	exit 5
+fi
+
+zed_log_msg "powered down slot $ZEVENT_VDEV_ENC_SYSFS_PATH for $ZEVENT_VDEV_PATH"