diff options
Diffstat (limited to 'sys/dev/ixgbe/ixgbe.h')
| -rw-r--r-- | sys/dev/ixgbe/ixgbe.h | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/sys/dev/ixgbe/ixgbe.h b/sys/dev/ixgbe/ixgbe.h index 341d4ebfcebc..624b71acabea 100644 --- a/sys/dev/ixgbe/ixgbe.h +++ b/sys/dev/ixgbe/ixgbe.h @@ -46,6 +46,7 @@ #include <sys/module.h> #include <sys/sockio.h> #include <sys/eventhandler.h> +#include <sys/priv.h> #include <net/if.h> #include <net/if_var.h> @@ -86,6 +87,7 @@ #include "ixgbe_phy.h" #include "ixgbe_vf.h" #include "ixgbe_features.h" +#include "ixgbe_e610.h" /* Tunables */ @@ -195,6 +197,15 @@ CSUM_IP_UDP|CSUM_IP_TCP|CSUM_IP_SCTP| \ CSUM_IP6_UDP|CSUM_IP6_TCP|CSUM_IP6_SCTP) +/* All BASE-T Physical layers */ +#define IXGBE_PHYSICAL_LAYERS_BASE_T_ALL \ + (IXGBE_PHYSICAL_LAYER_10GBASE_T |\ + IXGBE_PHYSICAL_LAYER_5000BASE_T |\ + IXGBE_PHYSICAL_LAYER_2500BASE_T |\ + IXGBE_PHYSICAL_LAYER_1000BASE_T |\ + IXGBE_PHYSICAL_LAYER_100BASE_TX |\ + IXGBE_PHYSICAL_LAYER_10BASE_T) + #define IXGBE_CAPS (IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6 | IFCAP_TSO | \ IFCAP_LRO | IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWTSO | \ IFCAP_VLAN_HWCSUM | IFCAP_JUMBO_MTU | IFCAP_VLAN_MTU | \ @@ -464,6 +475,21 @@ struct ixgbe_softc { /* Feature capable/enabled flags. See ixgbe_features.h */ u32 feat_cap; u32 feat_en; + u16 lse_mask; + + struct sysctl_oid *debug_sysctls; + u32 debug_dump_cluster_mask; + bool do_debug_dump; +}; + +struct ixgbe_debug_dump_cmd { + u32 offset; /* offset to read/write from table, in bytes */ + u8 cluster_id; /* also used to get next cluster id */ + u16 table_id; + u16 data_size; /* size of data field, in bytes */ + u16 reserved1; + u32 reserved2; + u8 data[]; }; /* Precision Time Sync (IEEE 1588) defines */ @@ -488,6 +514,43 @@ struct ixgbe_softc { #define IXGBE_PHY_CURRENT_TEMP 0xC820 #define IXGBE_PHY_OVERTEMP_STATUS 0xC830 +/** + * The ioctl command number used by NVM update for accessing the driver for + * NVM access commands. + */ +#define IXGBE_NVM_ACCESS \ + (((((((('E' << 4) + '1') << 4) + 'K') << 4) + 'G') << 4) | 5) + +/* + * The ioctl command number used by a userspace tool for accessing the driver + * for getting debug dump data from the firmware. + */ +#define IXGBE_DEBUG_DUMP \ + (((((((('E' << 4) + '1') << 4) + 'K') << 4) + 'G') << 4) | 6) + +/* Debug Dump related definitions */ +#define IXGBE_ACI_DBG_DUMP_CLUSTER_ID_INVALID 0xFFFFFF +#define IXGBE_ACI_DBG_DUMP_CLUSTER_ID_BASE 50 +#define IXGBE_ACI_DBG_DUMP_CLUSTER_ID_MAX 1 + +#define IXGBE_DBG_DUMP_VALID_CLUSTERS_MASK 0x3 +#define IXGBE_DBG_DUMP_BASE_SIZE (2 * 1024 * 1024) + +#define IXGBE_SYSCTL_DESC_DEBUG_DUMP_SET_CLUSTER \ +"\nSelect clusters to dump with \"dump\" sysctl" \ +"\nFlags:" \ +"\n\t 0x1 - Link" \ +"\n\t 0x2 - Full CSR Space, excluding RCW registers" \ +"\n\t" \ +"\nUse \"sysctl -x\" to view flags properly." + +#define IXGBE_SYSCTL_DESC_DUMP_DEBUG_DUMP \ +"\nWrite 1 to output a FW debug dump containing the clusters " \ +"specified by the \"clusters\" sysctl" \ +"\nThe \"-b\" flag must be used in order to dump this data " \ +"as binary data because" \ +"\nthis data is opaque and not a string." + /* Sysctl help messages; displayed with sysctl -d */ #define IXGBE_SYSCTL_DESC_ADV_SPEED \ "\nControl advertised link speed using these flags:\n" \ |