diff options
Diffstat (limited to 'sys/i386/i386/prof_machdep.c')
-rw-r--r-- | sys/i386/i386/prof_machdep.c | 404 |
1 files changed, 0 insertions, 404 deletions
diff --git a/sys/i386/i386/prof_machdep.c b/sys/i386/i386/prof_machdep.c deleted file mode 100644 index 55bf5d3da892..000000000000 --- a/sys/i386/i386/prof_machdep.c +++ /dev/null @@ -1,404 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 1996 Bruce D. Evans. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD$"); - -#ifdef GUPROF -#include "opt_i586_guprof.h" -#include "opt_perfmon.h" - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/bus.h> -#include <sys/cpu.h> -#include <sys/eventhandler.h> -#include <sys/gmon.h> -#include <sys/kernel.h> -#include <sys/smp.h> -#include <sys/sysctl.h> - -#include <machine/clock.h> -#include <machine/perfmon.h> -#include <machine/timerreg.h> - -#define CPUTIME_CLOCK_UNINITIALIZED 0 -#define CPUTIME_CLOCK_I8254 1 -#define CPUTIME_CLOCK_TSC 2 -#define CPUTIME_CLOCK_I586_PMC 3 -#define CPUTIME_CLOCK_I8254_SHIFT 7 - -int cputime_bias = 1; /* initialize for locality of reference */ - -static int cputime_clock = CPUTIME_CLOCK_UNINITIALIZED; -#if defined(PERFMON) && defined(I586_PMC_GUPROF) -static u_int cputime_clock_pmc_conf = I586_PMC_GUPROF; -static int cputime_clock_pmc_init; -static struct gmonparam saved_gmp; -#endif -#if defined(I586_CPU) || defined(I686_CPU) -static int cputime_prof_active; -#endif -#endif /* GUPROF */ - -#ifdef __GNUCLIKE_ASM -#if defined(SMP) && defined(GUPROF) -#define MPLOCK " \n\ - movl $1,%edx \n\ -9: \n\ - xorl %eax,%eax \n\ - lock \n\ - cmpxchgl %edx,mcount_lock \n\ - jne 9b \n" -#define MPUNLOCK "movl $0,mcount_lock \n" -#else /* !(SMP && GUPROF) */ -#define MPLOCK -#define MPUNLOCK -#endif /* SMP && GUPROF */ - -__asm(" \n\ -GM_STATE = 0 \n\ -GMON_PROF_OFF = 3 \n\ - \n\ - .text \n\ - .p2align 4,0x90 \n\ - .globl __mcount \n\ - .type __mcount,@function \n\ -__mcount: \n\ - # \n\ - # Check that we are profiling. Do it early for speed. \n\ - # \n\ - cmpl $GMON_PROF_OFF,_gmonparam+GM_STATE \n\ - je .mcount_exit \n\ - # \n\ - # __mcount is the same as [.]mcount except the caller \n\ - # hasn't changed the stack except to call here, so the \n\ - # caller's raddr is above our raddr. \n\ - # \n\ - movl 4(%esp),%edx \n\ - jmp .got_frompc \n\ - \n\ - .p2align 4,0x90 \n\ - .globl .mcount \n\ -.mcount: \n\ - cmpl $GMON_PROF_OFF,_gmonparam+GM_STATE \n\ - je .mcount_exit \n\ - # \n\ - # The caller's stack frame has already been built, so \n\ - # %ebp is the caller's frame pointer. The caller's \n\ - # raddr is in the caller's frame following the caller's \n\ - # caller's frame pointer. \n\ - # \n\ - movl 4(%ebp),%edx \n\ -.got_frompc: \n\ - # \n\ - # Our raddr is the caller's pc. \n\ - # \n\ - movl (%esp),%eax \n\ - \n\ - pushfl \n\ - pushl %eax \n\ - pushl %edx \n\ - cli \n" - MPLOCK " \n\ - call mcount \n" - MPUNLOCK " \n\ - addl $8,%esp \n\ - popfl \n\ -.mcount_exit: \n\ - ret $0 \n\ -"); - -void __mcount(void); -void (*__mcountp)(void) = __mcount; -#else /* !__GNUCLIKE_ASM */ -#error "this file needs to be ported to your compiler" -#endif /* __GNUCLIKE_ASM */ - -#ifdef GUPROF -/* - * [.]mexitcount saves the return register(s), loads selfpc and calls - * mexitcount(selfpc) to do the work. Someday it should be in a machine - * dependent file together with cputime(), __mcount and [.]mcount. cputime() - * can't just be put in machdep.c because it has to be compiled without -pg. - */ -#ifdef __GNUCLIKE_ASM -__asm(" \n\ - .text \n\ -# \n\ -# Dummy label to be seen when gprof -u hides [.]mexitcount. \n\ -# \n\ - .p2align 4,0x90 \n\ - .globl __mexitcount \n\ - .type __mexitcount,@function \n\ -__mexitcount: \n\ - nop \n\ - \n\ -GMON_PROF_HIRES = 4 \n\ - \n\ - .p2align 4,0x90 \n\ - .globl .mexitcount \n\ -.mexitcount: \n\ - cmpl $GMON_PROF_HIRES,_gmonparam+GM_STATE \n\ - jne .mexitcount_exit \n\ - pushl %edx \n\ - pushl %eax \n\ - movl 8(%esp),%eax \n\ - pushfl \n\ - pushl %eax \n\ - cli \n" - MPLOCK " \n\ - call mexitcount \n" - MPUNLOCK " \n\ - addl $4,%esp \n\ - popfl \n\ - popl %eax \n\ - popl %edx \n\ -.mexitcount_exit: \n\ - ret $0 \n\ -"); -#endif /* __GNUCLIKE_ASM */ - -void __mexitcount(void); -void (*__mexitcountp)(void) = __mexitcount; - -/* - * Return the time elapsed since the last call. The units are machine- - * dependent. - */ -int -cputime() -{ - u_int count; - int delta; -#if (defined(I586_CPU) || defined(I686_CPU)) && \ - defined(PERFMON) && defined(I586_PMC_GUPROF) && !defined(SMP) - u_quad_t event_count; -#endif - u_char high, low; - static u_int prev_count; - -#if defined(I586_CPU) || defined(I686_CPU) - if (cputime_clock == CPUTIME_CLOCK_TSC) { - /* - * Scale the TSC a little to make cputime()'s frequency - * fit in an int, assuming that the TSC frequency fits - * in a u_int. Use a fixed scale since dynamic scaling - * would be slower and we can't really use the low bit - * of precision. - */ - count = (u_int)rdtsc() & ~1u; - delta = (int)(count - prev_count) >> 1; - prev_count = count; - return (delta); - } -#if defined(PERFMON) && defined(I586_PMC_GUPROF) && !defined(SMP) - if (cputime_clock == CPUTIME_CLOCK_I586_PMC) { - /* - * XXX permon_read() should be inlined so that the - * perfmon module doesn't need to be compiled with - * profiling disabled and so that it is fast. - */ - perfmon_read(0, &event_count); - - count = (u_int)event_count; - delta = (int)(count - prev_count); - prev_count = count; - return (delta); - } -#endif /* PERFMON && I586_PMC_GUPROF && !SMP */ -#endif /* I586_CPU || I686_CPU */ - - /* - * Read the current value of the 8254 timer counter 0. - */ - outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); - low = inb(TIMER_CNTR0); - high = inb(TIMER_CNTR0); - count = ((high << 8) | low) << CPUTIME_CLOCK_I8254_SHIFT; - - /* - * The timer counts down from TIMER_CNTR0_MAX to 0 and then resets. - * While profiling is enabled, this routine is called at least twice - * per timer reset (for mcounting and mexitcounting hardclock()), - * so at most one reset has occurred since the last call, and one - * has occurred iff the current count is larger than the previous - * count. This allows counter underflow to be detected faster - * than in microtime(). - */ - delta = prev_count - count; - prev_count = count; - if ((int) delta <= 0) - return (delta + (i8254_max_count << CPUTIME_CLOCK_I8254_SHIFT)); - return (delta); -} - -static int -sysctl_machdep_cputime_clock(SYSCTL_HANDLER_ARGS) -{ - int clock; - int error; -#if defined(PERFMON) && defined(I586_PMC_GUPROF) - int event; - struct pmc pmc; -#endif - - clock = cputime_clock; -#if defined(PERFMON) && defined(I586_PMC_GUPROF) - if (clock == CPUTIME_CLOCK_I586_PMC) { - pmc.pmc_val = cputime_clock_pmc_conf; - clock += pmc.pmc_event; - } -#endif - error = sysctl_handle_opaque(oidp, &clock, sizeof clock, req); - if (error == 0 && req->newptr != NULL) { -#if defined(PERFMON) && defined(I586_PMC_GUPROF) - if (clock >= CPUTIME_CLOCK_I586_PMC) { - event = clock - CPUTIME_CLOCK_I586_PMC; - if (event >= 256) - return (EINVAL); - pmc.pmc_num = 0; - pmc.pmc_event = event; - pmc.pmc_unit = 0; - pmc.pmc_flags = PMCF_E | PMCF_OS | PMCF_USR; - pmc.pmc_mask = 0; - cputime_clock_pmc_conf = pmc.pmc_val; - cputime_clock = CPUTIME_CLOCK_I586_PMC; - } else -#endif - { - if (clock < 0 || clock >= CPUTIME_CLOCK_I586_PMC) - return (EINVAL); - cputime_clock = clock; - } - } - return (error); -} - -SYSCTL_PROC(_machdep, OID_AUTO, cputime_clock, - CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 0, sizeof(u_int), - sysctl_machdep_cputime_clock, "I", - ""); - -/* - * The start and stop routines need not be here since we turn off profiling - * before calling them. They are here for convenience. - */ - -void -startguprof(gp) - struct gmonparam *gp; -{ -#if defined(I586_CPU) || defined(I686_CPU) - uint64_t freq; - - freq = atomic_load_acq_64(&tsc_freq); - if (cputime_clock == CPUTIME_CLOCK_UNINITIALIZED) { - if (freq != 0 && mp_ncpus == 1) - cputime_clock = CPUTIME_CLOCK_TSC; - else - cputime_clock = CPUTIME_CLOCK_I8254; - } - if (cputime_clock == CPUTIME_CLOCK_TSC) { - gp->profrate = freq >> 1; - cputime_prof_active = 1; - } else - gp->profrate = i8254_freq << CPUTIME_CLOCK_I8254_SHIFT; -#if defined(PERFMON) && defined(I586_PMC_GUPROF) - if (cputime_clock == CPUTIME_CLOCK_I586_PMC) { - if (perfmon_avail() && - perfmon_setup(0, cputime_clock_pmc_conf) == 0) { - if (perfmon_start(0) != 0) - perfmon_fini(0); - else { - /* XXX 1 event == 1 us. */ - gp->profrate = 1000000; - - saved_gmp = *gp; - - /* Zap overheads. They are invalid. */ - gp->cputime_overhead = 0; - gp->mcount_overhead = 0; - gp->mcount_post_overhead = 0; - gp->mcount_pre_overhead = 0; - gp->mexitcount_overhead = 0; - gp->mexitcount_post_overhead = 0; - gp->mexitcount_pre_overhead = 0; - - cputime_clock_pmc_init = TRUE; - } - } - } -#endif /* PERFMON && I586_PMC_GUPROF */ -#else /* !(I586_CPU || I686_CPU) */ - if (cputime_clock == CPUTIME_CLOCK_UNINITIALIZED) - cputime_clock = CPUTIME_CLOCK_I8254; - gp->profrate = i8254_freq << CPUTIME_CLOCK_I8254_SHIFT; -#endif /* I586_CPU || I686_CPU */ - cputime_bias = 0; - cputime(); -} - -void -stopguprof(gp) - struct gmonparam *gp; -{ -#if defined(PERFMON) && defined(I586_PMC_GUPROF) - if (cputime_clock_pmc_init) { - *gp = saved_gmp; - perfmon_fini(0); - cputime_clock_pmc_init = FALSE; - } -#endif -#if defined(I586_CPU) || defined(I686_CPU) - if (cputime_clock == CPUTIME_CLOCK_TSC) - cputime_prof_active = 0; -#endif -} - -#if defined(I586_CPU) || defined(I686_CPU) -/* If the cpu frequency changed while profiling, report a warning. */ -static void -tsc_freq_changed(void *arg, const struct cf_level *level, int status) -{ - - /* - * If there was an error during the transition or - * TSC is P-state invariant, don't do anything. - */ - if (status != 0 || tsc_is_invariant) - return; - if (cputime_prof_active && cputime_clock == CPUTIME_CLOCK_TSC) - printf("warning: cpu freq changed while profiling active\n"); -} - -EVENTHANDLER_DEFINE(cpufreq_post_change, tsc_freq_changed, NULL, - EVENTHANDLER_PRI_ANY); -#endif /* I586_CPU || I686_CPU */ - -#endif /* GUPROF */ |