1 files changed, 0 insertions, 178 deletions
diff --git a/test/CodeGen/ARM/returned-ext.ll b/test/CodeGen/ARM/returned-ext.ll
deleted file mode 100644
index da3511b9c781..000000000000
--- a/test/CodeGen/ARM/returned-ext.ll
+++ /dev/null
@@ -1,178 +0,0 @@
-; RUN: llc < %s -mtriple=armv6-linux-gnueabi | FileCheck %s -check-prefix=CHECKELF
-; RUN: llc < %s -mtriple=thumbv7-apple-ios5.0 | FileCheck %s -check-prefix=CHECKT2D
-
-declare i16 @identity16(i16 returned %x)
-declare i32 @identity32(i32 returned %x)
-declare zeroext i16 @retzext16(i16 returned %x)
-declare i16 @paramzext16(i16 zeroext returned %x)
-declare zeroext i16 @bothzext16(i16 zeroext returned %x)
-
-; The zeroext param attribute below is meant to have no effect
-define i16 @test_identity(i16 zeroext %x) {
-entry:
-; CHECKELF-LABEL: test_identity:
-; CHECKELF: mov [[SAVEX:r[0-9]+]], r0
-; CHECKELF: bl identity16
-; CHECKELF: uxth r0, r0
-; CHECKELF: bl identity32
-; CHECKELF: mov r0, [[SAVEX]]
-; CHECKT2D-LABEL: test_identity:
-; CHECKT2D: mov [[SAVEX:r[0-9]+]], r0
-; CHECKT2D: bl _identity16
-; CHECKT2D: uxth r0, r0
-; CHECKT2D: bl _identity32
-; CHECKT2D: mov r0, [[SAVEX]]
-  %call = tail call i16 @identity16(i16 %x)
-  %b = zext i16 %call to i32
-  %call2 = tail call i32 @identity32(i32 %b)
-  ret i16 %x
-}
-
-; FIXME: This ought not to require register saving but currently does because
-; x is not considered equal to %call (see SelectionDAGBuilder.cpp)
-define i16 @test_matched_ret(i16 %x) {
-entry:
-; CHECKELF-LABEL: test_matched_ret:
-
-; This shouldn't be required
-; CHECKELF: mov [[SAVEX:r[0-9]+]], r0
-
-; CHECKELF: bl retzext16
-; CHECKELF-NOT: uxth r0, {{r[0-9]+}}
-; CHECKELF: bl identity32
-
-; This shouldn't be required
-; CHECKELF: mov r0, [[SAVEX]]
-
-; CHECKT2D-LABEL: test_matched_ret:
-
-; This shouldn't be required
-; CHECKT2D: mov [[SAVEX:r[0-9]+]], r0
-
-; CHECKT2D: bl _retzext16
-; CHECKT2D-NOT: uxth r0, {{r[0-9]+}}
-; CHECKT2D: bl _identity32
-
-; This shouldn't be required
-; CHECKT2D: mov r0, [[SAVEX]]
-
-  %call = tail call i16 @retzext16(i16 %x)
-  %b = zext i16 %call to i32
-  %call2 = tail call i32 @identity32(i32 %b)
-  ret i16 %x
-}
-
-define i16 @test_mismatched_ret(i16 %x) {
-entry:
-; CHECKELF-LABEL: test_mismatched_ret:
-; CHECKELF: mov [[SAVEX:r[0-9]+]], r0
-; CHECKELF: bl retzext16
-; CHECKELF: sxth r0, {{r[0-9]+}}
-; CHECKELF: bl identity32
-; CHECKELF: mov r0, [[SAVEX]]
-; CHECKT2D-LABEL: test_mismatched_ret:
-; CHECKT2D: mov [[SAVEX:r[0-9]+]], r0
-; CHECKT2D: bl _retzext16
-; CHECKT2D: sxth r0, {{r[0-9]+}}
-; CHECKT2D: bl _identity32
-; CHECKT2D: mov r0, [[SAVEX]]
-  %call = tail call i16 @retzext16(i16 %x)
-  %b = sext i16 %call to i32
-  %call2 = tail call i32 @identity32(i32 %b)
-  ret i16 %x
-}
-
-define i16 @test_matched_paramext(i16 %x) {
-entry:
-; CHECKELF-LABEL: test_matched_paramext:
-; CHECKELF: uxth r0, r0
-; CHECKELF: bl paramzext16
-; CHECKELF: uxth r0, r0
-; CHECKELF: bl identity32
-; CHECKELF: b paramzext16
-; CHECKT2D-LABEL: test_matched_paramext:
-; CHECKT2D: uxth r0, r0
-; CHECKT2D: bl _paramzext16
-; CHECKT2D: uxth r0, r0
-; CHECKT2D: bl _identity32
-; CHECKT2D: b.w _paramzext16
-  %call = tail call i16 @paramzext16(i16 %x)
-  %b = zext i16 %call to i32
-  %call2 = tail call i32 @identity32(i32 %b)
-  %call3 = tail call i16 @paramzext16(i16 %call)
-  ret i16 %call3
-}
-
-; FIXME: This theoretically ought to optimize to exact same output as the
-; version above, but doesn't currently (see SelectionDAGBuilder.cpp) 
-define i16 @test_matched_paramext2(i16 %x) {
-entry:
-
-; Since there doesn't seem to be an unambiguous optimal selection and
-; scheduling of uxth and mov instructions below in lieu of the 'returned'
-; optimization, don't bother checking: just verify that the calls are made
-; in the correct order as a basic sanity check
-
-; CHECKELF-LABEL: test_matched_paramext2:
-; CHECKELF: bl paramzext16
-; CHECKELF: bl identity32
-; CHECKELF: b paramzext16
-; CHECKT2D-LABEL: test_matched_paramext2:
-; CHECKT2D: bl _paramzext16
-; CHECKT2D: bl _identity32
-; CHECKT2D: b.w _paramzext16
-  %call = tail call i16 @paramzext16(i16 %x)
-
-; Should make no difference if %x is used below rather than %call, but it does
-  %b = zext i16 %x to i32
-
-  %call2 = tail call i32 @identity32(i32 %b)
-  %call3 = tail call i16 @paramzext16(i16 %call)
-  ret i16 %call3
-}
-
-define i16 @test_matched_bothext(i16 %x) {
-entry:
-; CHECKELF-LABEL: test_matched_bothext:
-; CHECKELF: uxth r0, r0
-; CHECKELF: bl bothzext16
-; CHECKELF-NOT: uxth r0, r0
-
-; FIXME: Tail call should be OK here
-; CHECKELF: bl identity32
-
-; CHECKT2D-LABEL: test_matched_bothext:
-; CHECKT2D: uxth r0, r0
-; CHECKT2D: bl _bothzext16
-; CHECKT2D-NOT: uxth r0, r0
-
-; FIXME: Tail call should be OK here
-; CHECKT2D: bl _identity32
-
-  %call = tail call i16 @bothzext16(i16 %x)
-  %b = zext i16 %x to i32
-  %call2 = tail call i32 @identity32(i32 %b)
-  ret i16 %call
-}
-
-define i16 @test_mismatched_bothext(i16 %x) {
-entry:
-; CHECKELF-LABEL: test_mismatched_bothext:
-; CHECKELF: mov [[SAVEX:r[0-9]+]], r0
-; CHECKELF: uxth r0, {{r[0-9]+}}
-; CHECKELF: bl bothzext16
-; CHECKELF: sxth r0, [[SAVEX]]
-; CHECKELF: bl identity32
-; CHECKELF: mov r0, [[SAVEX]]
-; CHECKT2D-LABEL: test_mismatched_bothext:
-; CHECKT2D: mov [[SAVEX:r[0-9]+]], r0
-; CHECKT2D: uxth r0, {{r[0-9]+}}
-; CHECKT2D: bl _bothzext16
-; CHECKT2D: sxth r0, [[SAVEX]]
-; CHECKT2D: bl _identity32
-; CHECKT2D: mov r0, [[SAVEX]]
-  %call = tail call i16 @bothzext16(i16 %x)
-  %b = sext i16 %x to i32
-  %call2 = tail call i32 @identity32(i32 %b)
-  ret i16 %x
-}