diff options
Diffstat (limited to 'usr.sbin/amd/doc/texinfo.tex')
| -rw-r--r-- | usr.sbin/amd/doc/texinfo.tex | 2192 |
1 files changed, 2192 insertions, 0 deletions
diff --git a/usr.sbin/amd/doc/texinfo.tex b/usr.sbin/amd/doc/texinfo.tex new file mode 100644 index 000000000000..73528edcd035 --- /dev/null +++ b/usr.sbin/amd/doc/texinfo.tex @@ -0,0 +1,2192 @@ +%% TeX macros to handle texinfo files + +% Copyright (C) 1985, 1986, 1988 Free Software Foundation, Inc. + +%GNU CC is free software; you can redistribute it and/or modify +%it under the terms of the GNU General Public License as published by +%the Free Software Foundation; either version 1, or (at your option) +%any later version. + +%GNU CC is distributed in the hope that it will be useful, +%but WITHOUT ANY WARRANTY; without even the implied warranty of +%MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +%GNU General Public License for more details. + +%You should have received a copy of the GNU General Public License +%along with GNU CC; see the file COPYING. If not, write to +%the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + +%In other words, you are welcome to use, share and improve this program. +%You are forbidden to forbid anyone else to use, share and improve +%what you give them. Help stamp out software-hoarding! + +\def\texinfoversion{1.26} +\message{Loading texinfo package [Version \texinfoversion]:} +\message{} + +% Save some parts of plain tex whose names we will redefine. + +\let\ptexlbrace=\{ +\let\ptexrbrace=\} +\let\ptexdot=\. +\let\ptexstar=\* +\let\ptexend=\end +\let\ptexbullet=\bullet +\let\ptexb=\b +\let\ptexc=\c +\let\ptexi=\i +\let\ptext=\t +\let\ptexl=\l +\let\ptexL=\L + +\def\tie{\penalty 10000\ } % Save plain tex definition of ~. + +\message{Basics,} +\chardef\other=12 + +\hyphenation{ap-pen-dix} +\hyphenation{mini-buf-fer mini-buf-fers} +\hyphenation{eshell} + +% Margin to add to right of even pages, to left of odd pages. +\newdimen \bindingoffset \bindingoffset=0pt +\newdimen \normaloffset \normaloffset=\hoffset +\newdimen\pagewidth \newdimen\pageheight +\pagewidth=\hsize \pageheight=\vsize + +%---------------------Begin change----------------------- +% +% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986 +% +\newdimen\cornerlong \newdimen\cornerthick +\newdimen \topandbottommargin +\newdimen \outerhsize \newdimen \outervsize +\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks +\outerhsize=7in +\outervsize=9.5in +\topandbottommargin=.75in +% +%---------------------End change----------------------- + +% \onepageout takes a vbox as an argument. Note that \pagecontents +% does insertions itself, but you have to call it yourself. +\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}} +\def\onepageout#1{\hoffset=\normaloffset +\ifodd\pageno \advance\hoffset by \bindingoffset +\else \advance\hoffset by -\bindingoffset\fi +\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}% + {\let\hsize=\pagewidth \makefootline}} +\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi} + + +% Here is a modification of the main output routine for Near East Publications +% This provides right-angle cropmarks at all four corners. +% The contents of the page are centerlined into the cropmarks, +% and any desired binding offset is added as an \hskip on either +% site of the centerlined box. (P. A. MacKay, 12 November, 1986) +% +\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up + \shipout + \vbox to \outervsize{\hsize=\outerhsize + \vbox{\line{\ewtop\hfill\ewtop}} + \nointerlineskip + \line{\vbox{\moveleft\cornerthick\nstop} + \hfill + \vbox{\moveright\cornerthick\nstop}} + \vskip \topandbottommargin + \centerline{\ifodd\pageno\hskip\bindingoffset\fi + \vbox{ + {\let\hsize=\pagewidth \makeheadline} + \pagebody{#1} + {\let\hsize=\pagewidth \makefootline}} + \ifodd\pageno\else\hskip\bindingoffset\fi} + \vskip \topandbottommargin plus1fill minus1fill + \boxmaxdepth\cornerthick + \line{\vbox{\moveleft\cornerthick\nsbot} + \hfill + \vbox{\moveright\cornerthick\nsbot}} + \nointerlineskip + \vbox{\line{\ewbot\hfill\ewbot}} + } + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi} +% +% Do @cropmarks to get crop marks +\def\cropmarks{\let\onepageout=\croppageout } + +\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} +{\catcode`\@ =11 +\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi +\dimen@=\dp#1 \unvbox#1 +\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi +\ifr@ggedbottom \kern-\dimen@ \vfil \fi} +} + +% +% Here are the rules for the cropmarks. Note that they are +% offset so that the space between them is truly \outerhsize or \outervsize +% (P. A. MacKay, 12 November, 1986) +% +\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} +\def\nstop{\vbox + {\hrule height\cornerthick depth\cornerlong width\cornerthick}} +\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} +\def\nsbot{\vbox + {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + +% Parse an argument, then pass it to #1. +% The argument can be delimited with [...] or with "..." or braces +% or it can be a whole line. +% #1 should be a macro which expects +% an ordinary undelimited TeX argument. + +\def\parsearg #1{\let\next=#1\begingroup\obeylines\futurelet\temp\parseargx} + +\def\parseargx{% +\ifx \obeyedspace\temp \aftergroup\parseargdiscardspace \else% +\aftergroup \parseargline % +\fi \endgroup} + +{\obeyspaces % +\gdef\parseargdiscardspace {\begingroup\obeylines\futurelet\temp\parseargx}} + +\gdef\obeyedspace{\ } + +\def\parseargline{\begingroup \obeylines \parsearglinex} +{\obeylines % +\gdef\parsearglinex #1^^M{\endgroup \next {#1}}} + +\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} + +%% These are used to keep @begin/@end levels from running away +%% Call \inENV within environments (after a \begingroup) +\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} +\def\ENVcheck{% +\ifENV\errmessage{Still within an environment. Type Return to continue.} +\endgroup\fi} % This is not perfect, but it should reduce lossage + +% @begin foo is the same as @foo, for now. +\newhelp\EMsimple{Type <Return> to continue} + +\outer\def\begin{\parsearg\beginxxx} + +\def\beginxxx #1{% +\expandafter\ifx\csname #1\endcsname\relax +{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else +\csname #1\endcsname\fi} + +%% @end foo executes the definition of \Efoo. +%% foo can be delimited by doublequotes or brackets. + +\def\end{\parsearg\endxxx} + +\def\endxxx #1{% +\expandafter\ifx\csname E#1\endcsname\relax +\expandafter\ifx\csname #1\endcsname\relax +\errmessage{Undefined command @end #1}\else +\errorE{#1}\fi\fi +\csname E#1\endcsname} +\def\errorE#1{ +{\errhelp=\EMsimple \errmessage{@end #1 not within #1 environment}}} + +% Single-spacing is done by various environments. + +\newskip\singlespaceskip \singlespaceskip = \baselineskip +\def\singlespace{% +{\advance \baselineskip by -\singlespaceskip +\kern \baselineskip}% +\baselineskip=\singlespaceskip +} + +%% Simple single-character @ commands + +% @@ prints an @ +% Kludge this until the fonts are right (grr). +\def\@{{\sf \char '100}} + +% Define @` and @' to be the same as ` and ' +% but suppressing ligatures. +\def\`{{`}} +\def\'{{'}} + +% Used to generate quoted braces. + +\def\mylbrace {{\tt \char '173}} +\def\myrbrace {{\tt \char '175}} +\let\{=\mylbrace +\let\}=\myrbrace + +% @: forces normal size whitespace following. +\def\:{\spacefactor=1000 } + +% @* forces a line break. +\def\*{\hfil\break} + +% @. is an end-of-sentence period. +\def\.{.\spacefactor=3000 } + +% @w prevents a word break +\def\w #1{\hbox{#1}} + +% @group ... @end group forces ... to be all on one page. + +\def\group{\begingroup% \inENV ??? +\def \Egroup{\egroup\endgroup} +\vbox\bgroup} + +% @br forces paragraph break + +\let\br = \par + +% @dots{} output some dots + +\def\dots{$\ldots$} + +% @page forces the start of a new page + +\def\page{\par\vfill\supereject} + +% @exdent text.... +% outputs text on separate line in roman font, starting at standard page margin + +\def\exdent{\errmessage{@exdent in filled text}} + % @lisp, etc, define \exdent locally from \internalexdent + +{\obeyspaces +\gdef\internalexdent{\parsearg\exdentzzz}} + +\def\exdentzzz #1{{\advance \leftskip by -\lispnarrowing +\advance \hsize by -\leftskip +\advance \hsize by -\rightskip +\leftline{{\rm#1}}}} + +% @include file insert text of that file as input. + +\def\include{\parsearg\includezzz} +\def\includezzz #1{{\def\thisfile{#1}\input #1 +}} + +\def\thisfile{} + +% @center line outputs that line, centered + +\def\center{\parsearg\centerzzz} +\def\centerzzz #1{{\advance\hsize by -\leftskip +\advance\hsize by -\rightskip +\centerline{#1}}} + +% @sp n outputs n lines of vertical space + +\def\sp{\parsearg\spxxx} +\def\spxxx #1{\par \vskip #1\baselineskip} + +% @comment ...line which is ignored... +% @c is the same as @comment +% @ignore ... @end ignore is another way to write a comment + +\def\comment{\parsearg \commentxxx} + +\def\commentxxx #1{} + +\let\c=\comment + +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% +\let\chapter=\relax +\let\unnumbered=\relax +\let\unnumberedsec=\relax +\let\unnumberedsection=\relax +\let\unnumberedsubsec=\relax +\let\unnumberedsubsection=\relax +\let\unnumberedsubsubsec=\relax +\let\unnumberedsubsubsection=\relax +\let\section=\relax +\let\subsec=\relax +\let\subsubsec=\relax +\let\subsection=\relax +\let\subsubsection=\relax +\let\appendix=\relax +\let\appendixsec=\relax +\let\appendixsection=\relax +\let\appendixsubsec=\relax +\let\appendixsubsection=\relax +\let\appendixsubsubsec=\relax +\let\appendixsubsubsection=\relax +} + +\def\ignore{\begingroup\ignoresections\ignorexxx} +\long\def\ignorexxx #1\end ignore{\endgroup} + +% Conditionals to test whether a flag is set. + +\outer\def\ifset{\begingroup\ignoresections\parsearg\ifsetxxx} + +\def\ifsetxxx #1{\endgroup +\expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\ifsetfail +\else \let\temp=\relax \fi +\temp} +\def\Eifset{} +\def\ifsetfail{\begingroup\ignoresections\ifsetfailxxx} +\long\def\ifsetfailxxx #1\end ifset{\endgroup} + +\outer\def\ifclear{\begingroup\ignoresections\parsearg\ifclearxxx} + +\def\ifclearxxx #1{\endgroup +\expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\relax +\else \let\temp=\ifclearfail \fi +\temp} +\def\Eifclear{} +\def\ifclearfail{\begingroup\ignoresections\ifclearfailxxx} +\long\def\ifclearfailxxx #1\end ifclear{\endgroup} + +% Some texinfo constructs that are trivial in tex + +\def\iftex{} +\def\Eiftex{} +\def\ifinfo{\begingroup\ignoresections\ifinfoxxx} +\long\def\ifinfoxxx #1\end ifinfo{\endgroup} +\long\def\menu #1\end menu{} +\def\asis#1{#1} + +\def\node{\parsearg\nodezzz} +\def\nodezzz#1{\nodexxx [#1,]} +\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} +\let\lastnode=\relax + +\def\donoderef{\ifx\lastnode\relax\else +\expandafter\expandafter\expandafter\setref{\lastnode}\fi +\let\lastnode=\relax} + +\def\unnumbnoderef{\ifx\lastnode\relax\else +\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi +\let\lastnode=\relax} + +\let\refill=\relax + +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \readauxfile + \opencontents + \openindices + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \comment % Ignore the actual filename. +} + +\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} + +\def\inforef #1{\inforefzzz #1,,,,**} +\def\inforefzzz #1,#2,#3,#4**{See Info file \file{\losespace#3{}}, node `\losespace#1{}'} +\def\losespace #1{#1} + +\message{fonts,} + +% Font-change commands. + +%% Try out Computer Modern fonts at \magstephalf +\font\tenrm=cmr10 scaled \magstephalf +\font\tentt=cmtt10 scaled \magstephalf +% Instead of cmb10, you many want to use cmbx10. +% cmbx10 is a prettier font on its own, but cmb10 +% looks better when embedded in a line with cmr10. +\font\tenbf=cmb10 scaled \magstephalf +\font\tenit=cmti10 scaled \magstephalf +\font\tensl=cmsl10 scaled \magstephalf +\font\tensf=cmss10 scaled \magstephalf +\def\li{\sf} +\font\tensc=cmcsc10 scaled \magstephalf + +% Fonts for @defun, etc. +\font\defbf=cmbx10 scaled \magstep1 %was 1314 +\let\deftt=\tentt +\def\df{\let\tt=\deftt \defbf} + +% Font for title +\font\titlerm = cmbx10 scaled \magstep5 + +% Fonts for indices +\font\indit=cmti9 \font\indrm=cmr9 +\def\indbf{\indrm} \def\indsl{\indit} +\def\indexfonts{\let\it=\indit \let\sl=\indsl \let\bf=\indbf \let\rm=\indrm} + +% Fonts for headings +\font\chaprm=cmbx10 scaled \magstep3 +\font\chapit=cmti10 scaled \magstep3 +\font\chapsl=cmsl10 scaled \magstep3 +\font\chaptt=cmtt10 scaled \magstep3 +\font\chapsf=cmss10 scaled \magstep3 +\let\chapbf=\chaprm + +\font\secrm=cmbx10 scaled \magstep2 +\font\secit=cmti10 scaled \magstep2 +\font\secsl=cmsl10 scaled \magstep2 +\font\sectt=cmtt10 scaled \magstep2 +\font\secsf=cmss10 scaled \magstep2 +\let\secbf=\secrm + +% \font\ssecrm=cmbx10 scaled \magstep1 % This size an fontlooked bad. +% \font\ssecit=cmti10 scaled \magstep1 % The letters were too crowded. +% \font\ssecsl=cmsl10 scaled \magstep1 +% \font\ssectt=cmtt10 scaled \magstep1 +% \font\ssecsf=cmss10 scaled \magstep1 + +\font\ssecrm=cmb10 at 13pt % Note the use of cmb rather than cmbx. +\font\ssecit=cmti10 at 13pt % Also, the size is a little larger than +\font\ssecsl=cmsl10 at 13pt % being scaled magstep1. +\font\ssectt=cmtt10 at 13pt +\font\ssecsf=cmss10 at 13pt + +\let\ssecbf=\ssecrm + +\def\textfonts{\let\rm=\tenrm\let\it=\tenit\let\sl=\tensl\let\bf=\tenbf% +\let\smallcaps=\tensc\let\sf=\tensf} +\def\chapfonts{\let\rm=\chaprm\let\it=\chapit\let\sl=\chapsl\let\bf=\chapbf\let\tt=\chaptt\let\sf=\chapsf} +\def\secfonts{\let\rm=\secrm\let\it=\secit\let\sl=\secsl\let\bf=\secbf\let\tt=\sectt\let\sf=\secsf} +\def\subsecfonts{\let\rm=\ssecrm\let\it=\ssecit\let\sl=\ssecsl\let\bf=\ssecbf\let\tt=\ssectt\let\sf=\ssecsf} +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +% Font for table of contents. +\font\truesecrm=cmr12 + +%% Add scribe-like font environments, plus @l for inline lisp (usually sans +%% serif) and @ii for TeX italic + +\def\i#1{{\sl #1}} +\let\var=\i +\let\dfn=\i +\let\emph=\i +\let\cite=\i + +\def\b#1{{\bf #1}} +\let\strong=\b + +\def\t#1{{\tt \rawbackslash \frenchspacing #1}\null} +\let\ttfont = \t +\let\kbd=\t +\let\code=\t +\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null} +\def\key #1{{\tt \uppercase{#1}}\null} +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + +\let\file=\samp + +\def\l#1{{\li #1}\null} % + +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\\smallcaps #1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +\def\titlefont#1{{\titlerm #1}} + +% Make altmode in file print out right + +\catcode `\^^[=\active \def^^[{$\diamondsuit$} + +\message{page headings,} + +\newskip\titlepagetopglue \titlepagetopglue = 1.5in +\newskip\titlepagebottomglue \titlepagebottomglue = 2pc + +% First the title page. Must do @settitle before @titlepage. +\font\titlerm = cmbx12 scaled \magstep2 +\def\titlefont#1{{\titlerm #1}} + +\newtoks\realeverypar +\newif\ifseenauthor + +\def\titlepage{\begingroup \parindent=0pt \textfonts + \font\subtitlerm = cmr10 scaled \magstephalf + \def\subtitlefont{\subtitlerm \normalbaselineskip = 12pt \normalbaselines}% + % + \font\authorrm = cmbx12 scaled \magstep1 + \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% + % + % The first subtitle should have some space before it, but not the + % others. They all should be ragged left. +% ??? This code turned off because (1) it is wrong for all old title +% pages, and (2) it makes an extra group which never is ended. +% \begingroup \realeverypar = {\leftskip = 2in plus 3em minus 1em +% \parfillskip = 0pt}% +% \everypar = {\vglue \baselineskip \the\realeverypar +% \everypar={\the\realeverypar}}% + % + % Now you can print the title using @title. + \def\title{\parsearg\titlezzz}% + \def\titlezzz##1{\leftline{\titlefont{##1} + \vskip4pt \hrule height 4pt \vskip4pt}% + \vglue\titlepagetopglue + % + % Now you can put text using @subtitle. + \def\subtitle{\parsearg\subtitlezzz}% + \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% + % + % @author should come last, but may come many times. + \def\author{\parsearg\authorzzz}% + \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi + {\authorfont \leftline{##1}}}% + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page +% \def\page{\vskip4pt \hrule height 2pt \vskip\titlepagebottomglue +% \oldpage \endgroup\hrule height0pt\relax}% + \def\page{\oldpage \hbox{}}} +} + +\def\Etitlepage{\endgroup\page\HEADINGSon} + +%%% Set up page headings and footings. + +\let\thispage=\folio + +\newtoks \evenheadline % Token sequence for heading line of even pages +\newtoks \oddheadline % Token sequence for heading line of odd pages +\newtoks \evenfootline % Token sequence for footing line of even pages +\newtoks \oddfootline % Token sequence for footing line of odd pages + +% Now make Tex use those variables +\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}} +\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline \else \the\evenfootline \fi}} + +% Commands to set those variables. +% For example, this is what @headings on does +% @evenheading @thistitle|@thispage|@thischapter +% @oddheading @thischapter|@thispage|@thistitle +% @evenfooting @thisfile|| +% @oddfooting ||@thisfile + +\def\evenheading{\parsearg\evenheadingxxx} +\def\oddheading{\parsearg\oddheadingxxx} +\def\everyheading{\parsearg\everyheadingxxx} + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\oddfooting{\parsearg\oddfootingxxx} +\def\everyfooting{\parsearg\everyfootingxxx} + +{\catcode`\@=0 % + +\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} +\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} +\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish} +\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}} +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} +\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} +\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% +\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish} +\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}} +\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} +% +}% unbind the catcode of @. + +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% By default, they are off. + +\def\headings #1 {\csname HEADINGS#1\endcsname} + +\def\HEADINGSoff{ +\global\evenheadline={\hfil} \global\evenfootline={\hfil} +\global\oddheadline={\hfil} \global\oddfootline={\hfil}} +\HEADINGSoff +% When we turn headings on, set the page number to 1. +% For double-sided printing, put current file name in lower left corner, +% chapter name on inside top of right hand pages, document +% title on inside top of left hand pages, and page numbers on outside top +% edge of all pages. +\def\HEADINGSdouble{ +%\pagealignmacro +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +} +% For single-sided printing, chapter title goes across top left of page, +% page number on top right. +\def\HEADINGSsingle{ +%\pagealignmacro +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +} +\def\HEADINGSon{\HEADINGSdouble} + +% Subroutines used in generating headings +% Produces Day Month Year style of output. +\def\today{\number\day\space +\ifcase\month\or +January\or February\or March\or April\or May\or June\or +July\or August\or September\or October\or November\or December\fi +\space\number\year} + +% Use this if you want the Month Day, Year style of output. +%\def\today{\ifcase\month\or +%January\or February\or March\or April\or May\or June\or +%July\or August\or September\or October\or November\or December\fi +%\space\number\day, \number\year} + +% @settitle line... specifies the title of the document, for headings +% It generates no output of its own + +\def\thistitle{No Title} +\def\settitle{\parsearg\settitlezzz} +\def\settitlezzz #1{\gdef\thistitle{#1}} + +\message{tables,} + +% Tables -- @table, @ftable, @item(x), @kitem(x), @xitem(x). + +% default indentation of table text +\newdimen\tableindent \tableindent=.8in +% default indentation of @itemize and @enumerate text +\newdimen\itemindent \itemindent=.3in +% margin between end of table item and start of table text. +\newdimen\itemmargin \itemmargin=.1in + +% used internally for \itemindent minus \itemmargin +\newdimen\itemmax + +% Note @table and @ftable define @item, @itemx, etc., with these defs. +% They also define \itemindex +% to index the item name in whatever manner is desired (perhaps none). + +\def\internalBitem{\smallbreak \parsearg\itemzzz} +\def\internalBitemx{\par \parsearg\itemzzz} + +\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} +\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \par \parsearg\xitemzzz} + +\def\internalBkitem{\smallbreak \parsearg\kitemzzz} +\def\internalBkitemx{\par \parsearg\kitemzzz} + +\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}\itemzzz {#1}} + +\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}\itemzzz {#1}} + +\def\itemzzz #1{\begingroup % +\advance \hsize by -\rightskip % +\advance \hsize by -\leftskip % +\setbox0=\hbox{\itemfont{#1}}% +\itemindex{#1}% +\parskip=0in % +\noindent % +\ifdim \wd0>\itemmax % +\vadjust{\penalty 10000}% +\hbox to \hsize{\hskip -\tableindent\box0\hss}\ % +\else % +\hbox to 0pt{\hskip -\tableindent\box0\hss}% +\fi % +\endgroup % +} + +\def\item{\errmessage{@item while not in a table}} +\def\itemx{\errmessage{@itemx while not in a table}} +\def\kitem{\errmessage{@kitem while not in a table}} +\def\kitemx{\errmessage{@kitemx while not in a table}} +\def\xitem{\errmessage{@xitem while not in a table}} +\def\xitemx{\errmessage{@xitemx while not in a table}} + +%% Contains a kludge to get @end[description] to work +\def\description{\tablez{\dontindex}{1}{}{}{}{}} + +\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} +{\obeylines\obeyspaces% +\gdef\tablex #1^^M{% +\tabley\dontindex#1 \endtabley}} + +\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} +{\obeylines\obeyspaces% +\gdef\ftablex #1^^M{% +\tabley\fnitemindex#1 \endtabley}} + +\def\dontindex #1{} +\def\fnitemindex #1{\doind {fn}{\code{#1}}}% + +{\obeyspaces % +\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% +\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} + +\def\tablez #1#2#3#4#5#6{% +\aboveenvbreak % +\begingroup % +\def\Edescription{\Etable}% Neccessary kludge. +\let\itemindex=#1% +\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % +\ifnum 0#4>0 \tableindent=#4\mil \fi % +\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % +\def\itemfont{#2}% +\itemmax=\tableindent % +\advance \itemmax by -\itemmargin % +\advance \leftskip by \tableindent % +\parindent = 0pt +\parskip = \smallskipamount +\ifdim \parskip=0pt \parskip=2pt \fi% +\def\Etable{\endgraf\endgroup\afterenvbreak}% +\let\item = \internalBitem % +\let\itemx = \internalBitemx % +\let\kitem = \internalBkitem % +\let\kitemx = \internalBkitemx % +\let\xitem = \internalBxitem % +\let\xitemx = \internalBxitemx % +} + +% This is the counter used by @enumerate, which is really @itemize + +\newcount \itemno + +\def\itemize{\parsearg\itemizezzz} + +\def\itemizezzz #1{\itemizey {#1}{\Eitemize}} + +\def\itemizey #1#2{% +\aboveenvbreak % +\begingroup % +\itemno = 0 % +\itemmax=\itemindent % +\advance \itemmax by -\itemmargin % +\advance \leftskip by \itemindent % +\parindent = 0pt +\parskip = \smallskipamount +\ifdim \parskip=0pt \parskip=2pt \fi% +\def#2{\endgraf\endgroup\afterenvbreak}% +\def\itemcontents{#1}% +\let\item=\itemizeitem} + +\def\bullet{$\ptexbullet$} +\def\minus{$-$} + +\def\enumerate{\itemizey{\the\itemno.}\Eenumerate\flushcr} + +% Definition of @item while inside @itemize. + +\def\itemizeitem{% +\advance\itemno by 1 +{\let\par=\endgraf \smallbreak}% +\ifhmode \errmessage{\in hmode at itemizeitem}\fi +{\parskip=0in \hskip 0pt +\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% +\vadjust{\penalty 300}}% +\flushcr} + +\message{indexing,} +% Index generation facilities + +% Define \newwrite to be identical to plain tex's \newwrite +% except not \outer, so it can be used within \newindex. +{\catcode`\@=11 +\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} + +% \newindex {foo} defines an index named foo. +% It automatically defines \fooindex such that +% \fooindex ...rest of line... puts an entry in the index foo. +% It also defines \fooindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is foo. +% The name of an index should be no more than 2 characters long +% for the sake of vms. + +\def\newindex #1{ +\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file +\openout \csname#1indfile\endcsname \jobname.#1 % Open the file +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\doindex {#1}} +} + +% @defindex foo == \newindex{foo} + +\def\defindex{\parsearg\newindex} + +% Define @defcodeindex, like @defindex except put all entries in @code. + +\def\newcodeindex #1{ +\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file +\openout \csname#1indfile\endcsname \jobname.#1 % Open the file +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\docodeindex {#1}} +} + +\def\defcodeindex{\parsearg\newcodeindex} + +% @synindex foo bar makes index foo feed into index bar. +% Do this instead of @defindex foo if you don't want it as a separate index. +\def\synindex #1 #2 {% +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\doindex {#2}}% +} + +% @syncodeindex foo bar similar, but put all entries made for index foo +% inside @code. +\def\syncodeindex #1 #2 {% +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\docodeindex {#2}}% +} + +% Define \doindex, the driver for all \fooindex macros. +% Argument #1 is generated by the calling \fooindex macro, +% and it is "foo", the name of the index. + +% \doindex just uses \parsearg; it calls \doind for the actual work. +% This is because \doind is more useful to call from other macros. + +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. + +\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} +\def\singleindexer #1{\doind{\indexname}{#1}} + +% like the previous two, but they put @code around the argument. +\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} +\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} + +\def\indexdummies{% +\def\bf{\realbackslash bf }% +\def\rm{\realbackslash rm }% +\def\sl{\realbackslash sl }% +\def\dots{\realbackslash dots }% +\def\copyright{\realbackslash copyright }% +} + +% \indexnofonts no-ops all font-change commands. +% This is used when outputting the strings to sort the index by. +\def\indexdummyfont#1{#1} +\def\indexnofonts{% +\let\code=\indexdummyfont +\let\samp=\indexdummyfont +\let\kbd=\indexdummyfont +\let\key=\indexdummyfont +\let\var=\indexdummyfont +} + +% To define \realbackslash, we must make \ not be an escape. +% We must first make another character (@) an escape +% so we do not become unable to do a definition. + +{\catcode`\@=0 \catcode`\\=\other +@gdef@realbackslash{\}} + +\let\indexbackslash=0 %overridden during \printindex. + +\def\doind #1#2{% +{\indexdummies % Must do this here, since \bf, etc expand at this stage +\count10=\lastpenalty % +\escapechar=`\\% +{\let\folio=0% Expand all macros now EXCEPT \folio +\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now +% so it will be output as is; and it will print as backslash in the indx. +% +% Now process the index-string once, with all font commands turned off, +% to get the string to sort the index by. +{\indexnofonts +\xdef\temp1{#2}% +}% +% Now produce the complete index entry. We process the index-string again, +% this time with font commands expanded, to get what to print in the index. +\edef\temp{% +\write \csname#1indfile\endcsname{% +\realbackslash entry {\temp1}{\folio}{#2}}}% +\temp }% +\penalty\count10}} + +\def\dosubind #1#2#3{% +{\indexdummies % Must do this here, since \bf, etc expand at this stage +\count10=\lastpenalty % +\escapechar=`\\% +{\let\folio=0% +\def\rawbackslashxx{\indexbackslash}% +% +% Now process the index-string once, with all font commands turned off, +% to get the string to sort the index by. +{\indexnofonts +\xdef\temp1{#2 #3}% +}% +% Now produce the complete index entry. We process the index-string again, +% this time with font commands expanded, to get what to print in the index. +\edef\temp{% +\write \csname#1indfile\endcsname{% +\realbackslash entry {\temp1}{\folio}{#2}{#3}}}% +\temp }% +\penalty\count10}} + +% The index entry written in the file actually looks like +% \entry {sortstring}{page}{topic} +% or +% \entry {sortstring}{page}{topic}{subtopic} +% The texindex program reads in these files and writes files +% containing these kinds of lines: +% \initial {c} +% before the first topic whose initial is c +% \entry {topic}{pagelist} +% for a topic that is used without subtopics +% \primary {topic} +% for the beginning of a topic that is used with subtopics +% \secondary {subtopic}{pagelist} +% for each subtopic. + +% Define the user-accessible indexing commands +% @findex, @vindex, @kindex, @cindex. + +\def\findex {\fnindex} +\def\kindex {\kyindex} +\def\cindex {\cpindex} +\def\vindex {\vrindex} +\def\tindex {\tpindex} +\def\pindex {\pgindex} + +\def\cindexsub {\begingroup\obeylines\cindexsub} +{\obeylines % +\gdef\cindexsub "#1" #2^^M{\endgroup % +\dosubind{cp}{#2}{#1}}} + +% Define the macros used in formatting output of the sorted index material. + +% This is what you call to cause a particular index to get printed. +% Write +% @unnumbered Function Index +% @printindex fn + +\def\printindex{\parsearg\doprintindex} + +\def\doprintindex#1{\tex % +\catcode`\%=\other\catcode`\&=\other\catcode`\#=\other +\catcode`\$=\other\catcode`\_=\other +\catcode`\~=\other +\def\indexbackslash{\rawbackslashxx} +\indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt +\begindoublecolumns +\openin 1 \jobname.#1s +\ifeof 1 \else \closein 1 \input \jobname.#1s +\fi +\enddoublecolumns +\Etex} + +% These macros are used by the sorted index file itself. +% Change them to control the appearance of the index. + +% Same as \bigskipamount except no shrink. +% \balancecolumns gets confused if there is any shrink. +\newskip\initialskipamount \initialskipamount 12pt plus4pt + +\outer\def\initial #1{% +{\let\tentt=\sectt \let\sf=\sectt +\ifdim\lastskip<\initialskipamount +\removelastskip \penalty-200 \vskip \initialskipamount\fi +\line{\secbf#1\hfill}\kern 2pt\penalty3000}} + +\outer\def\entry #1#2{ +{\parfillskip=0in \parskip=0in \parindent=0in +\hangindent=1in \hangafter=1% +\noindent\hbox{#1}\dotfill #2\par +}} + +\def\primary #1{\line{#1\hfil}} + +\newskip\secondaryindent \secondaryindent=0.5cm + +\def\secondary #1#2{ +{\parfillskip=0in \parskip=0in +\hangindent =1in \hangafter=1 +\noindent\hskip\secondaryindent\hbox{#1}\dotfill #2\par +}} + +%% Define two-column mode, which is used in indexes. +%% Adapted from the TeXBook, page 416 +\catcode `\@=11 + +\newbox\partialpage + +\newdimen\doublecolumnhsize \doublecolumnhsize = 3.11in +\newdimen\doublecolumnvsize \doublecolumnvsize = 19.1in + +\def\begindoublecolumns{\begingroup + \output={\global\setbox\partialpage=\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}\eject + \output={\doublecolumnout} \hsize=\doublecolumnhsize \vsize=\doublecolumnvsize} +\def\enddoublecolumns{\output={\balancecolumns}\eject + \endgroup \pagegoal=\vsize} + +\def\doublecolumnout{\splittopskip=\topskip \splitmaxdepth=\maxdepth + \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage + \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ + \onepageout\pagesofar \unvbox255 \penalty\outputpenalty} +\def\pagesofar{\unvbox\partialpage % + \hsize=\doublecolumnhsize % have to restore this since output routine +% changes it to set cropmarks (P. A. MacKay, 12 Nov. 1986) + \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}} +\def\balancecolumns{\setbox0=\vbox{\unvbox255} \dimen@=\ht0 + \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip + \divide\dimen@ by2 \splittopskip=\topskip + {\vbadness=10000 \loop \global\setbox3=\copy0 + \global\setbox1=\vsplit3 to\dimen@ + \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat} + \setbox0=\vbox to\dimen@{\unvbox1} \setbox2=\vbox to\dimen@{\unvbox3} + \pagesofar} + +\catcode `\@=\other +\message{sectioning,} +% Define chapters, sections, etc. + +\newcount \chapno +\newcount \secno +\newcount \subsecno +\newcount \subsubsecno + +% This counter is funny since it counts through charcodes of letters A, B, ... +\newcount \appendixno \appendixno = `\@ +\def\appendixletter{\char\the\appendixno} + +\newwrite \contentsfile +% This is called from \setfilename. +\def\opencontents{\openout \contentsfile = \jobname.toc} + +% Each @chapter defines this as the name of the chapter. +% page headings and footings can use it. @section does likewise + +\def\thischapter{} \def\thissection{} +\def\seccheck#1{\if \pageno<0 % +\errmessage{@#1 not allowed after generating table of contents}\fi +% +} + +\outer\def\chapter{\parsearg\chapterzzz} +\def\chapterzzz #1{\seccheck{chapter}% +\secno=0 \subsecno=0 \subsubsecno=0 \global\advance \chapno by 1 \message{Chapter \the\chapno}% +\chapmacro {#1}{\the\chapno}% +\gdef\thissection{#1}\gdef\thischapter{#1}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +} + +\outer\def\appendix{\parsearg\appendixzzz} +\def\appendixzzz #1{\seccheck{appendix}% +\secno=0 \subsecno=0 \subsubsecno=0 \global\advance \appendixno by 1 \message{Appendix \appendixletter}% +\chapmacro {#1}{Appendix \appendixletter}% +\gdef\thischapter{#1}\gdef\thissection{#1}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash chapentry {#1}{Appendix \appendixletter}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +} + +\outer\def\unnumbered{\parsearg\unnumberedzzz} +\def\unnumberedzzz #1{\seccheck{unnumbered}% +\secno=0 \subsecno=0 \subsubsecno=0 \message{(#1)} +\unnumbchapmacro {#1}% +\gdef\thischapter{#1}\gdef\thissection{#1}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +} + +\outer\def\section{\parsearg\sectionzzz} +\def\sectionzzz #1{\seccheck{section}% +\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % +\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash secentry % +{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\penalty 10000 % +} + +\outer\def\appendixsection{\parsearg\appendixsectionzzz} +\outer\def\appendixsec{\parsearg\appendixsectionzzz} +\def\appendixsectionzzz #1{\seccheck{appendixsection}% +\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % +\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash secentry % +{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +} + +\outer\def\unnumberedsec{\parsearg\unnumberedseczzz} +\def\unnumberedseczzz #1{\seccheck{unnumberedsec}% +\plainsecheading {#1}\gdef\thissection{#1}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +} + +\outer\def\subsection{\parsearg\subsectionzzz} +\def\subsectionzzz #1{\seccheck{subsection}% +\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % +\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash subsecentry % +{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\penalty 10000 % +} + +\outer\def\appendixsubsec{\parsearg\appendixsubseczzz} +\def\appendixsubseczzz #1{\seccheck{appendixsubsec}% +\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % +\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash subsecentry % +{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +} + +\outer\def\unnumberedsubsec{\parsearg\unnumberedsubseczzz} +\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}% +\plainsecheading {#1}\gdef\thissection{#1}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +} + +\outer\def\subsubsection{\parsearg\subsubsectionzzz} +\def\subsubsectionzzz #1{\seccheck{subsubsection}% +\gdef\thissection{#1}\global\advance \subsubsecno by 1 % +\subsubsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash subsubsecentry % +{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%\ +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\penalty 10000 % +} + +\outer\def\appendixsubsubsec{\parsearg\appendixsubsubseczzz} +\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}% +\gdef\thissection{#1}\global\advance \subsubsecno by 1 % +\subsubsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash subsubsecentry{#1}% +{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%\ +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +} + +\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} +\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}% +\plainsecheading {#1}\gdef\thissection{#1}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +} + +% These are variants which are not "outer", so they can appear in @ifinfo. +\def\infounnumbered{\parsearg\unnumberedzzz} +\def\infounnumberedsec{\parsearg\unnumberedseczzz} +\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} +\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} + +\def\infoappendix{\parsearg\appendixzzz} +\def\infoappendixsec{\parsearg\appendixseczzz} +\def\infoappendixsubsec{\parsearg\appendixsubseczzz} +\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} + +\def\infochapter{\parsearg\chapterzzz} +\def\infosection{\parsearg\sectionzzz} +\def\infosubsection{\parsearg\subsectionzzz} +\def\infosubsubsection{\parsearg\subsubsectionzzz} + +% Define @majorheading, @heading and @subheading + +\def\majorheading #1{% +{\advance\chapheadingskip by 10pt \chapbreak }% +{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 200} + +\def\chapheading #1{\chapbreak % +{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 200} + +\def\heading{\parsearg\secheadingi} + +% These macros generate a chapter, section, etc. heading only +% (including whitespace, linebreaking, etc. around it), +% given all the information in convenient, parsed form. + +%%% Args are the skip and penalty (usually negative) +\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} + +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} + +%%% Define plain chapter starts, and page on/off switching for it +% Parameter controlling skip before chapter headings (if needed) + +\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt + +\def\chapbreak{\dobreak \chapheadingskip {-4000}} +\def\chappager{\par\vfill\supereject} +\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} + +\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} + +\def\CHAPPAGoff{ +\global\let\pchapsepmacro=\chapbreak +\global\let\pagealignmacro=\chappager} + +\def\CHAPPAGon{ +\global\let\pchapsepmacro=\chappager +\global\let\pagealignmacro=\chappager +\global\def\HEADINGSon{\HEADINGSsingle}} + +\def\CHAPPAGodd{ +\global\let\pchapsepmacro=\chapoddpage +\global\let\pagealignmacro=\chapoddpage +\global\def\HEADINGSon{\HEADINGSdouble}} + +\CHAPPAGon + +\def\CHAPFplain{ +\global\let\chapmacro=\chfplain +\global\let\unnumbchapmacro=\unnchfplain} + +\def\chfplain #1#2{% +\pchapsepmacro % +{\chapfonts \line{\rm #2.\enspace #1\hfill}}\bigskip \par\penalty 5000 % +} + +\def\unnchfplain #1{% +\pchapsepmacro % +{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 10000 % +} +\CHAPFplain % The default + +\def\unnchfopen #1{% +\chapoddpage {\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 10000 % +} + +\def\chfopen #1#2{\chapoddpage {\chapfonts +\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% +\par\penalty 5000 % +} + +\def\CHAPFopen{ +\global\let\chapmacro=\chfopen +\global\let\unnumbchapmacro=\unnchfopen} + +% Parameter controlling skip before section headings. + +\newskip \subsecheadingskip \subsecheadingskip = 17pt plus 8pt minus 4pt +\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} + +\newskip \secheadingskip \secheadingskip = 21pt plus 8pt minus 4pt +\def\secheadingbreak{\dobreak \secheadingskip {-1000}} + + +% Section fonts are the base font at magstep2, which produces +% a size a bit more than 14 points in the default situation. + +\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}} +\def\plainsecheading #1{\secheadingi {#1}} +\def\secheadingi #1{{\advance \secheadingskip by \parskip % +\secheadingbreak}% +{\secfonts \line{\rm #1\hfill}}% +\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 } + + +% Subsection fonts are the base font at magstep1, +% which produces a size of 12 points. + +\def\subsecheading #1#2#3#4{{\advance \subsecheadingskip by \parskip % +\subsecheadingbreak}% +{\subsecfonts \line{\rm#2.#3.#4\enspace #1\hfill}}% +\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 } + +\def\subsubsecfonts{\subsecfonts} % Maybe this should change: + % Perhaps make sssec fonts scaled + % magstep half +\def\subsubsecheading #1#2#3#4#5{{\advance \subsecheadingskip by \parskip % +\subsecheadingbreak}% +{\subsubsecfonts \line{\rm#2.#3.#4.#5\enspace #1\hfill}}% +\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000} + + +\message{toc printing,} + +% Finish up the main text and prepare to read what we've written +% to \contentsfile. + +\def\startcontents#1{% + \ifnum \pageno>0 + \pagealignmacro + \immediate\closeout \contentsfile + \pageno = -1 % Request roman numbered pages. + \fi + \unnumbchapmacro{#1}\def\thischapter{#1}% + \begingroup % Set up to handle contents files properly. + \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -1in % Don't use the full line length. +} + + +% Normal (long) toc. +\outer\def\contents{% + \startcontents{Table of Contents}% + \input \jobname.toc + \endgroup + \vfill \eject +} + +% And just the chapters. +\outer\def\summarycontents{% + \startcontents{Short Contents}% + % + \let\chapentry = \shortchapentry + \let\unnumbchapentry = \shortunnumberedentry + % We want a true roman here for the page numbers. + \secfonts \let\rm = \truesecrm \rm + \advance\baselineskip by 1pt % Open it up a little. + \def\secentry ##1##2##3##4{} + \def\unnumbsecentry ##1##2{} + \def\subsecentry ##1##2##3##4##5{} + \def\unnumbsubsecentry ##1##2{} + \def\subsubsecentry ##1##2##3##4##5##6{} + \def\unnumbsubsubsecentry ##1##2{} + \input \jobname.toc + \endgroup + \vfill \eject +} +\let\shortcontents = \summarycontents + +% These macros generate individual entries in the table of contents. +% The first argument is the chapter or section name. +% The last argument is the page number. +% The arguments in between are the chapter number, section number, ... + +% Chapter-level things, for both the long and short contents. +\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} +\def\shortchapentry#1#2#3{% + \line{{#2\labelspace #1}\dotfill\doshortpageno{#3}}% +} + +\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} +\def\shortunnumberedentry#1#2{% + \line{#1\dotfill\doshortpageno{#2}}% +} + +% Sections. +\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} +\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}} + +% Subsections. +\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} +\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}} + +% And subsubsections. +\def\subsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} +\def\unnumbsubsecentry#1#2{\dosubsubsecentry{#1}{#2}} + + +% This parameter controls the indentation of the various levels. +\newdimen\tocindent \tocindent = 3pc + +% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% page number. +% +% If the toc has to be broken over pages, we would want to be at chapters +% if at all possible; hence the \penalty. +\def\dochapentry#1#2{% + \penalty-300 \vskip\baselineskip + \line{\chapentryfonts #1\dotfill \dopageno{#2}}% + \nobreak\vskip .25\baselineskip +} + +\def\dosecentry#1#2{% + \line{\secentryfonts \hskip\tocindent #1\dotfill \dopageno{#2}}% +} + +\def\dosubsecentry#1#2{% + \line{\subsecentryfonts \hskip2\tocindent #1\dotfill \dopageno{#2}}% +} + +\def\dosubsubsecentry#1#2{% + \line{\subsubsecentryfonts \hskip3\tocindent #1\dotfill \dopageno{#2}}% +} + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \let\rm = \sf \sf} +\def\secentryfonts{\textfonts} +\let\subsecentryfonts = \textfonts +\let\subsubsecentryfonts = \textfonts + + +\message{environments,} + +% @tex ... @end tex escapes into raw Tex temporarily. +% One exception: @ is still an escape character, so that @end tex works. +% But \@ or @@ will get a plain tex @ character. + +\def\tex{\begingroup +\catcode `\\=0 \catcode `\{=1 \catcode `\}=2 +\catcode `\$=3 \catcode `\&=4 \catcode `\#=6 +\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie +\catcode `\%=14 +\catcode`\"=12 +\catcode`\|=12 +\catcode`\<=12 +\catcode`\>=12 +\escapechar=`\\ +% +\let\{=\ptexlbrace +\let\}=\ptexrbrace +\let\.=\ptexdot +\let\*=\ptexstar +\def\@={@}% +\let\bullet=\ptexbullet +\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl +\let\L=\ptexL +% +\let\Etex=\endgroup} + +% Define @lisp ... @endlisp. +% @lisp does a \begingroup so it can rebind things, +% including the definition of @endlisp (which normally is erroneous). + +% Amount to narrow the margins by for @lisp. +\newskip\lispnarrowing \lispnarrowing=0.4in + +% This is the definition that ^M gets inside @lisp +% phr: changed space to \null, to avoid overfull hbox problems. +{\obeyspaces% +\gdef\lisppar{\null\endgraf}} + +% Cause \obeyspaces to make each Space cause a word-separation +% rather than the default which is that it acts punctuation. +% This is because space in tt font looks funny. +{\obeyspaces % +\gdef\sepspaces{\def {\ }}} + +\newskip\aboveenvskipamount \aboveenvskipamount= 0pt +\def\aboveenvbreak{{\advance\aboveenvskipamount by \parskip +\endgraf \ifdim\lastskip<\aboveenvskipamount +\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}} + +\def\afterenvbreak{\endgraf \ifdim\lastskip<\aboveenvskipamount +\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi} + +\def\lisp{\aboveenvbreak\begingroup\inENV %This group ends at the end of the @lisp body +\hfuzz=12truept % Don't be fussy +% Make spaces be word-separators rather than space tokens. +\sepspaces % +% Single space lines +\singlespace % +% The following causes blank lines not to be ignored +% by adding a space to the end of each line. +\let\par=\lisppar +\def\Elisp{\endgroup\afterenvbreak}% +\parskip=0pt +\advance \leftskip by \lispnarrowing +\parindent=0pt +\let\exdent=\internalexdent +\obeyspaces \obeylines \tt \rawbackslash +\def\next##1{}\next} + + +\let\example=\lisp +\def\Eexample{\Elisp} + +\let\smallexample=\lisp +\def\Esmallexample{\Elisp} + +% Macro for 9 pt. examples, necessary to print with 5" lines. +% From Pavel@xerox. This is not really used unless the +% @smallbook command is given. + +\def\smalllispx{\aboveenvbreak\begingroup\inENV +% This group ends at the end of the @lisp body +\hfuzz=12truept % Don't be fussy +% Make spaces be word-separators rather than space tokens. +\sepspaces % +% Single space lines +\singlespace % +% The following causes blank lines not to be ignored +% by adding a space to the end of each line. +\let\par=\lisppar +\def\Esmalllisp{\endgroup\afterenvbreak}% +\parskip=0pt +\advance \leftskip by \lispnarrowing +\parindent=0pt +\let\exdent=\internalexdent +\obeyspaces \obeylines \ninett \rawbackslash +\def\next##1{}\next} + +% This is @display; same as @lisp except use roman font. + +\def\display{\begingroup\inENV %This group ends at the end of the @display body +\aboveenvbreak +% Make spaces be word-separators rather than space tokens. +\sepspaces % +% Single space lines +\singlespace % +% The following causes blank lines not to be ignored +% by adding a space to the end of each line. +\let\par=\lisppar +\def\Edisplay{\endgroup\afterenvbreak}% +\parskip=0pt +\advance \leftskip by \lispnarrowing +\parindent=0pt +\let\exdent=\internalexdent +\obeyspaces \obeylines +\def\next##1{}\next} + +% This is @format; same as @lisp except use roman font and don't narrow margins + +\def\format{\begingroup\inENV %This group ends at the end of the @format body +\aboveenvbreak +% Make spaces be word-separators rather than space tokens. +\sepspaces % +\singlespace % +% The following causes blank lines not to be ignored +% by adding a space to the end of each line. +\let\par=\lisppar +\def\Eformat{\endgroup\afterenvbreak} +\parskip=0pt \parindent=0pt +\obeyspaces \obeylines +\def\next##1{}\next} + +% @flushleft and @flushright + +\def\flushleft{\begingroup\inENV %This group ends at the end of the @format body +\aboveenvbreak +% Make spaces be word-separators rather than space tokens. +\sepspaces % +% The following causes blank lines not to be ignored +% by adding a space to the end of each line. +% This also causes @ to work when the directive name +% is terminated by end of line. +\let\par=\lisppar +\def\Eflushleft{\endgroup\afterenvbreak}% +\parskip=0pt \parindent=0pt +\obeyspaces \obeylines +\def\next##1{}\next} + +\def\flushright{\begingroup\inENV %This group ends at the end of the @format body +\aboveenvbreak +% Make spaces be word-separators rather than space tokens. +\sepspaces % +% The following causes blank lines not to be ignored +% by adding a space to the end of each line. +% This also causes @ to work when the directive name +% is terminated by end of line. +\let\par=\lisppar +\def\Eflushright{\endgroup\afterenvbreak}% +\parskip=0pt \parindent=0pt +\advance \leftskip by 0pt plus 1fill +\obeyspaces \obeylines +\def\next##1{}\next} + +% @quotation - narrow the margins. + +\def\quotation{\begingroup\inENV %This group ends at the end of the @quotation body +{\parskip=0pt % because we will skip by \parskip too, later +\aboveenvbreak}% +\singlespace +\parindent=0pt +\def\Equotation{\par\endgroup\afterenvbreak}% +\advance \rightskip by \lispnarrowing +\advance \leftskip by \lispnarrowing} + +\message{defuns,} +% Define formatter for defuns +% First, allow user to change definition object font (\df) internally +\def\setdeffont #1 {\csname DEF#1\endcsname} + +\newskip\defbodyindent \defbodyindent=36pt +\newskip\defargsindent \defargsindent=50pt +\newskip\deftypemargin \deftypemargin=12pt +\newskip\deflastargmargin \deflastargmargin=18pt + +\newcount\parencount +% define \functionparens, which makes ( and ) and & do special things. +% \functionparens affects the group it is contained in. +\def\activeparens{% +\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active +\catcode`\[=\active \catcode`\]=\active} +{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) +\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } +\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + +% Definitions of (, ) and & used in args for functions. +% This is the definition of ( outside of all parentheses. +\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested % +\global\advance\parencount by 1 } +% +% This is the definition of ( when already inside a level of parens. +\gdef\opnested{\char`\(\global\advance\parencount by 1 } +% +\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. +% also in that case restore the outer-level definition of (. +\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi +\global\advance \parencount by -1 } +% If we encounter &foo, then turn on ()-hacking afterwards +\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } +% +\gdef\normalparens{\boldbrax\let&=\ampnr} +} % End of definition inside \activeparens +%% These parens (in \boldbrax) actually are a little bolder than the +%% contained text. This is especially needed for [ and ] +\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&} +\def\lbrb{{\tt\char`\[}} \def\rbrb{{\tt\char`\]}} + +% First, defname, which formats the header line itself. +% #1 should be the function name. +% #2 should be the type of definition, such as "Function". + +\def\defname #1#2{% +\leftskip = 0in % +\noindent % +\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% +\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line +\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations +\parshape 2 0in \dimen0 \defargsindent \dimen1 % +% Now output arg 2 ("Function" or some such) +% ending at \deftypemargin from the right margin, +% but stuck inside a box of width 0 so it does not interfere with linebreaking +\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}% +\tolerance=10000 \hbadness=10000 % Make all lines underfull and no complaints +{\df #1}\enskip % Generate function name +} + +% Actually process the body of a definition +% #1 should be the terminating control sequence, such as \Edefun. +% #2 should be the "another name" control sequence, such as \defunx. +% #3 should be the control sequence that actually processes the header, +% such as \defunheader. + +\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% +\parindent=0in \leftskip=\defbodyindent % +\begingroup\obeylines\activeparens\spacesplit#3} + +\def\defmethparsebody #1#2#3#4 {\begingroup\inENV % +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% +\parindent=0in \leftskip=\defbodyindent % +\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} + +\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2##1 ##2 {\def#4{##1}% +\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% +\parindent=0in \leftskip=\defbodyindent % +\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} + +% Split up #2 at the first space token. +% call #1 with two arguments: +% the first is all of #2 before the space token, +% the second is all of #2 after that space token. +% If #2 contains no space token, all of it is passed as the first arg +% and the second is passed as empty. + +{\obeylines +\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% +\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% +\ifx\relax #3% +#1{#2}{}\else #1{#2}{#3#4}\fi}} + +% So much for the things common to all kinds of definitions. + +% Define @defun. + +% First, define the processing that is wanted for arguments of \defun +% Use this to expand the args and terminate the paragraph they make up + +\def\defunargs #1{\functionparens \sl #1% +\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi% +\interlinepenalty=10000 +\endgraf\vskip -\parskip \penalty 10000} + +% Do complete processing of one @defun or @defunx line already parsed. + +% @deffn Command forward-char nchars + +\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} + +\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% +\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup} + +% @defun == @deffn Function + +\def\defun{\defparsebody\Edefun\defunx\defunheader} + +\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{Function}% +\defunargs {#2}\endgroup % +} + +% @defmac == @deffn Macro + +\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} + +\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{Macro}% +\defunargs {#2}\endgroup % +} + +% @defspec == @deffn Special Form + +\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} + +\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{Special form}% +\defunargs {#2}\endgroup % +} + +% This definition is run if you use @defunx +% anywhere other than immediately after a @defun or @defunx. + +\def\deffnx #1 {\errmessage{@deffnx in invalid context}} +\def\defunx #1 {\errmessage{@defunx in invalid context}} +\def\defmacx #1 {\errmessage{@defmacx in invalid context}} +\def\defspecx #1 {\errmessage{@defspecx in invalid context}} + +% @defmethod, and so on + +% @defop {Funny Method} foo-class frobnicate argument + +\def\defop #1 {\def\defoptype{#1}% +\defopparsebody\Edefop\defopx\defopheader\defoptype} + +\def\defopheader #1#2#3{\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index +\begingroup\defname {#2}{\defoptype{} on #1}% +\defunargs {#3}\endgroup % +} + +% @defmethod == @defop Method + +\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} + +\def\defmethodheader #1#2#3{\dosubind {fn}{\code{#2}}{on #1}% entry in function index +\begingroup\defname {#2}{Operation on #1}% +\defunargs {#3}\endgroup % +} + +% @defcv {Class Option} foo-class foo-flag + +\def\defcv #1 {\def\defcvtype{#1}% +\defopparsebody\Edefcv\defcvx\defcvheader\defcvtype} + +\def\defcvarheader #1#2#3{% +\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index +\begingroup\defname {#2}{\defcvtype of #1}% +\defvarargs {#3}\endgroup % +} + +% @defivar == @defcv {Instance Variable} + +\def\defivar{\defmethparsebody\Edefivar\defivarx\defivarheader} + +\def\defivarheader #1#2#3{% +\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index +\begingroup\defname {#2}{Instance variable of #1}% +\defvarargs {#3}\endgroup % +} + +% These definitions are run if you use @defmethodx, etc., +% anywhere other than immediately after a @defmethod, etc. + +\def\defopx #1 {\errmessage{@defopx in invalid context}} +\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}} +\def\defcvx #1 {\errmessage{@defcvx in invalid context}} +\def\defivarx #1 {\errmessage{@defivarx in invalid context}} + +% Now @defvar + +% First, define the processing that is wanted for arguments of @defvar. +% This is actually simple: just print them in roman. +% This must expand the args and terminate the paragraph they make up +\def\defvarargs #1{\normalparens #1% +\interlinepenalty=10000 +\endgraf\vskip -\parskip \penalty 10000} + +% @defvr Counter foo-count + +\def\defvr{\defmethparsebody\Edefvr\defvrx\defvrheader} + +\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% +\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} + +% @defvar == @defvr Variable + +\def\defvar{\defparsebody\Edefvar\defvarx\defvarheader} + +\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index +\begingroup\defname {#1}{Variable}% +\defvarargs {#2}\endgroup % +} + +% @defopt == @defvr {User Option} + +\def\defopt{\defparsebody\Edefopt\defoptx\defoptheader} + +\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index +\begingroup\defname {#1}{User Option}% +\defvarargs {#2}\endgroup % +} + +% This definition is run if you use @defvarx +% anywhere other than immediately after a @defvar or @defvarx. + +\def\defvrx #1 {\errmessage{@defvrx in invalid context}} +\def\defvarx #1 {\errmessage{@defvarx in invalid context}} +\def\defoptx #1 {\errmessage{@defoptx in invalid context}} + +% Now define @deftp +% Args are printed in bold, a slight difference from @defvar. + +\def\deftpargs #1{\bf \defvarargs{#1}} + +% @deftp Class window height width ... + +\def\deftp{\defmethparsebody\Edeftp\deftpx\deftpheader} + +\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% +\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} + +% This definition is run if you use @deftpx, etc +% anywhere other than immediately after a @deftp, etc. + +\def\deftpx #1 {\errmessage{@deftpx in invalid context}} + +\message{cross reference,} +% Define cross-reference macros +\newwrite \auxfile + +% \setref{foo} defines a cross-reference point named foo. + +\def\setref#1{% +\dosetq{#1-pg}{Ypagenumber}% +\dosetq{#1-snt}{Ysectionnumberandtype}} + +\def\unnumbsetref#1{% +\dosetq{#1-pg}{Ypagenumber}% +\dosetq{#1-snt}{Ynothing}} + +% \xref and \pxref generate cross references to specified points. + +\def\pxref #1{see \xrefX [#1,,,,,,,]} +\def\xref #1{See \xrefX [#1,,,,,,,]} +\def\xrefX [#1,#2,#3,#4,#5,#6]{% +\setbox1=\hbox{\i{\losespace#5{}}}% +\setbox0=\hbox{\losespace#3{}}% +\ifdim \wd0 =0pt \setbox0=\hbox{\losespace#1{}}\fi% +\ifdim \wd1 >0pt% +section \unhbox0{} in \unhbox1% +\else% +\refx{#1-snt} [\unhbox0], page\tie \refx{#1-pg}% +\fi } + +% \dosetq is the interface for calls from other macros + +\def\dosetq #1#2{{\let\folio=0% +\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}% +\next}} + +% \internalsetq {foo}{page} expands into CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} +% When the aux file is read, ' is the escape character + +\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} + +% Things to be expanded by \internalsetq + +\def\Ypagenumber{\folio} + +\def\Ynothing{} + +\def\Ysectionnumberandtype{% +\ifnum\secno=0 chapter\xreftie\the\chapno % +\else \ifnum \subsecno=0 section\xreftie\the\chapno.\the\secno % +\else \ifnum \subsubsecno=0 % +section\xreftie\the\chapno.\the\secno.\the\subsecno % +\else % +section\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % +\fi \fi \fi } + +\gdef\xreftie{'tie} + +% Define @refx to reference a specific cross-reference string. + +\def\refx#1{% +{% +\expandafter\ifx\csname X#1\endcsname\relax +% If not defined, say something at least. +\expandafter\gdef\csname X#1\endcsname {$<$undefined$>$}% +\message {WARNING: Cross-reference "#1" used but not yet defined}% +\message {}% +\fi % +\csname X#1\endcsname %It's defined, so just use it. +}} + +% Read the last existing aux file, if any. No error if none exists. + +% This is the macro invoked by entries in the aux file. +\def\xrdef #1#2{ +{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}} + +\def\readauxfile{% +\begingroup +\catcode `\^^@=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\^^C=\other +\catcode `\^^D=\other +\catcode `\^^E=\other +\catcode `\^^F=\other +\catcode `\^^G=\other +\catcode `\^^H=\other +\catcode `\ =\other +\catcode `\^^L=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\^^[=\other +\catcode `\^^\=\other +\catcode `\^^]=\other +\catcode `\^^^=\other +\catcode `\^^_=\other +\catcode `\@=\other +\catcode `\^=\other +\catcode `\~=\other +\catcode `\[=\other +\catcode `\]=\other +\catcode`\"=\other +\catcode`\_=\other +\catcode`\|=\other +\catcode`\<=\other +\catcode`\>=\other +\catcode `\$=\other +\catcode `\#=\other +\catcode `\&=\other +% the aux file uses ' as the escape. +% Turn off \ as an escape so we do not lose on +% entries which were dumped with control sequences in their names. +% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ +% Reference to such entries still does not work the way one would wish, +% but at least they do not bomb out when the aux file is read in. +\catcode `\{=1 \catcode `\}=2 +\catcode `\%=\other +\catcode `\'=0 +\catcode `\\=\other +\openin 1 \jobname.aux +\ifeof 1 \else \closein 1 \input \jobname.aux +\fi +% Open the new aux file. Tex will close it automatically at exit. +\openout \auxfile=\jobname.aux +\endgroup} + + +% Footnotes. + +\newcount \footnoteno + +\def\supereject{\par\penalty -20000\footnoteno =0 } + +\let\ptexfootnote=\footnote + +{\catcode `\@=11 +\gdef\footnote{\global\advance \footnoteno by \@ne +\edef\thisfootno{$^{\the\footnoteno}$}% +\let\@sf\empty +\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi +\thisfootno\@sf\parsearg\footnotezzz} + +\gdef\footnotezzz #1{\insert\footins{ +\interlinepenalty\interfootnotelinepenalty +\splittopskip\ht\strutbox % top baseline for broken footnotes +\splitmaxdepth\dp\strutbox \floatingpenalty\@MM +\leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip +\footstrut\hang\textindent{\thisfootno}#1\strut}} + +}%end \catcode `\@=11 + +% End of control word definitions. + +\message{and turning on texinfo input format.} + +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% +} + +% Set some numeric style parameters, for 8.5 x 11 format. + +\hsize = 6.5in +\parindent 15pt +\parskip 18pt plus 1pt +\baselineskip 15pt +\advance\topskip by 1.2cm + +% Prevent underfull vbox error messages. +\vbadness=10000 + +% Use @smallbook to reset parameters for 7x9.5 format +\def\smallbook{ +\global\lispnarrowing = 0.3in +\global\baselineskip 12pt +\global\parskip 3pt plus 1pt +\global\hsize = 5in +\global\doublecolumnhsize=2.4in \global\doublecolumnvsize=15.0in +\global\vsize=7.5in +\global\tolerance=700 +\global\hfuzz=1pt + +\global\pagewidth=\hsize +\global\pageheight=\vsize +\global\font\ninett=cmtt9 + +\global\let\smalllisp=\smalllispx +\global\let\smallexample=\smalllispx +\global\def\Esmallexample{\Esmalllisp} +} + +%% For a final copy, take out the rectangles +%% that mark overfull boxes (in case you have decided +%% that the text looks ok even though it passes the margin). +\def\finalout{\overfullrule=0pt} + +% Turn off all special characters except @ +% (and those which the user can use as if they were ordinary) +% Define certain chars to be always in tt font. + +\catcode`\"=\active +\def\activedoublequote{{\tt \char '042}} +\let"=\activedoublequote +\catcode`\~=\active +\def~{{\tt \char '176}} +\chardef\hat=`\^ +\catcode`\^=\active +\def^{{\tt \hat}} +\catcode`\_=\active +\def_{{\tt \char '137}} +\catcode`\|=\active +\def|{{\tt \char '174}} +\chardef \less=`\< +\catcode`\<=\active +\def<{{\tt \less}} +\chardef \gtr=`\> +\catcode`\>=\active +\def>{{\tt \gtr}} + +\catcode`\@=0 + +% \rawbackslashxx output one backslash character in current font +{\catcode`\\=\other +@gdef@rawbackslashxx{\}} + +% \rawbackslash redefines \ as input to do \rawbackslashxx. +{\catcode`\\=\active +@gdef@rawbackslash{@let\=@rawbackslashxx }} + +% \normalbackslash outputs one backslash in fixed width font. +\def\normalbackslash{{\tt\rawbackslashxx}} + +% Say @foo, not \foo, in error messages. +\escapechar=`\@ + +@c \catcode 17=0 @c Define control-q +\catcode`\\=\active + +% If a .fmt file is being used, we don't want the `\input texinfo' to show up. +% That is what \eatinput is for; after that, the `\' should revert to printing +% a backslash. +% +@gdef@eatinput input texinfo{@fixbackslash} +@global@let\ = @eatinput + +% On the other hand, perhaps the file did not have a `\input texinfo'. Then +% the first `\{ in the file would cause an error. This macro tries to fix +% that, assuming it is called before the first `\' could plausibly occur. +% +@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi} + +%% These look ok in all fonts, so just make them not special. The @rm below +%% makes sure that the current font starts out as the newly loaded cmr10 +@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other + +@textfonts +@rm |