| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
| |
Change 4787572d0580 made if_alloc_domain() never fail, then also do the
wrappers if_alloc(), if_alloc_dev(), and if_gethandle().
No functional change intended.
Reviewed by: kp, imp, glebius, stevek
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D45740
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
|
|
|
|
| |
Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
|
|
|
| |
Remove /^/[*/]\s*\$FreeBSD\$.*\n/
|
|
|
|
|
|
|
|
|
| |
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
|
|
|
|
|
| |
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37791
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| |
Sponsored by: Rubicon Communications, LLC ("Netgate")
|
|
|
|
| |
Notes:
svn path=/head/; revision=365121
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Notes:
svn path=/head/; revision=358333
|
|
|
|
| |
Notes:
svn path=/head/; revision=353811
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
Notes:
svn path=/head/; revision=338948
|
|
|
|
|
|
|
|
|
|
| |
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.
It's easy to apply/reapply when churn dies down.
Notes:
svn path=/head/; revision=338037
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Notes:
svn path=/head/; revision=338035
|
|
|
|
|
|
|
|
|
|
| |
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D15995
Notes:
svn path=/head/; revision=336103
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Run on LLNW canaries and tested by pho@
gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.
When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:
InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree
4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32
4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32
4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32
4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32
4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32
4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32
4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32
After the patch
InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree
5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51
5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51
5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51
5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51
5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52
5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52
Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch
Reviewed by: gallatin
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15366
Notes:
svn path=/head/; revision=333813
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Notes:
svn path=/head/; revision=326255
|
|
|
|
|
|
|
| |
CID: 611376
Notes:
svn path=/head/; revision=307926
|
|
|
|
| |
Notes:
svn path=/head/; revision=271829
|
|
|
|
|
|
|
|
|
| |
that resides in struct ifnet.
Sponsored by: Nginx, Inc.
Notes:
svn path=/head/; revision=270856
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.
In many cases these bugs could result in leaks when a driver was detached.
Reviewed by: yongari
MFC after: 2 weeks
Notes:
svn path=/head/; revision=267363
|
|
|
|
|
|
|
|
|
|
|
| |
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Notes:
svn path=/head/; revision=257176
|
|
|
|
|
|
|
| |
malloc(9) flags in sys/dev.
Notes:
svn path=/head/; revision=243857
|
|
|
|
|
|
|
| |
Reviewed by: yongari
Notes:
svn path=/head/; revision=229767
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.
Notes:
svn path=/head/; revision=227843
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
it might provide useful for debugging). For most mii(4) drivers it
was unclear whether the PHYs driven by them actually support
loopback or not. Moreover, typically loopback mode also needs to
be activated on the MAC, which none of the Ethernet drivers using
mii(4) implements. Given that loopback media has no real use (and
obviously hardly had a chance to actually work) besides for driver
development (which just loopback mode should be sufficient for
though, i.e one doesn't necessary need support for loopback media)
support for it is just dropped as both NetBSD and OpenBSD already
did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
instead of discrete function pointers, and extend this to include
a "reset" entry point. Make sure any PHY-specific reset routine is
always used, and provide one for lxtphy(4) which disables MII
interrupts (as is done for a few other PHYs we have drivers for).
This includes changing NIC drivers which previously just called the
generic mii_phy_reset() to now actually call the PHY-specific reset
routine, which might be crucial in some cases. While at it, the
redundant checks in these NIC drivers for mii->mii_instance not being
zero before calling the reset routines were removed because as soon
as one PHY driver attaches mii->mii_instance is incremented and we
hardly can end up in their media change callbacks etc if no PHY driver
has attached as mii_attach() would have failed in that case and not
attach a miibus(4) instance.
Consequently, NIC drivers now no longer should call mii_phy_reset()
directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
The purpose of that function is to perform the common steps to attach
a PHY driver instance and to hook it up to the miibus(4) instance and to
optionally also handle the probing, addition and initialization of the
supported media. So all a PHY driver without any special requirements
has to do in its bus attach method is to call mii_phy_dev_attach()
along with PHY-specific MIIF_* flags, a pointer to its PHY functions
and the add_media set to one. All PHY drivers were updated to take
advantage of mii_phy_dev_attach() as appropriate. Along with these
changes the capability mask was added to the mii_softc structure so
PHY drivers taking advantage of mii_phy_dev_attach() but still
handling media on their own do not need to fiddle with the MII attach
arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
structure. Several PHY drivers require this information also after
attaching and previously had to wrap their own softc around mii_softc.
NetBSD/OpenBSD also keep track of the model and revision on their
mii_softc structure. All PHY drivers were updated to take advantage
as appropriate.
- Convert the mebers of the MII data structure to unsigned where
appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
when mapping an OUI to the MII ID registers. All PHY drivers and
miidevs where changed as necessary. Actually this now again allows to
largely share miidevs with NetBSD, which fixed this problem already
9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
weren't explicitly converted to support flow control before. It's
unclear whether flow control actually works with these but typically
it should and their net behavior should be more correct with these
changes in place than without if the MAC driver sets MIIF_DOPAUSE.
Obtained from: NetBSD (partially)
Reviewed by: yongari (earlier version), silence on arch@ and net@
Notes:
svn path=/head/; revision=221407
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
addresses; we now let mii_attach() only probe the PHY at the desired
address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
off from, partly even based on grabbing and using the softc of the
parent; we now pass these flags down from the NIC to the PHY drivers
via mii_attach(). This got us rid of all such hacks except those of
brgphy() in combination with bce(4) and bge(4), which is way beyond
what can be expressed with simple flags.
While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).
Reviewed by: jhb, yongari
Notes:
svn path=/head/; revision=213893
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.
For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.
Approved by: re (kib)
MFC after: 6 weeks
Notes:
svn path=/head/; revision=195049
|
|
|
|
|
|
|
|
|
|
|
| |
counters for Rx/Tx statistics. Various counters in ifnet is also
updated with these hardware counters.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
Notes:
svn path=/head/; revision=181994
|
|
|
|
|
|
|
|
|
|
|
|
| |
interrupt mask register again. This saves one register access per
each interrupt.
Also don't try to process frames when driver is not running.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
Notes:
svn path=/head/; revision=181992
|
|
|
|
|
|
|
|
|
|
|
|
| |
link state and detach request.
While I'm here make sure established link is IFM_10_T or
IFM_100_TX as bfe(4) just supports 10/100Mbps media.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
Notes:
svn path=/head/; revision=181976
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
o Removed unneeded header files.
o bus_dma(9) fix:
- created parent tag with 1GB dma address limit with no
alignment restrictions.
- set 4096 alignment limit for Tx/Rx descriptor rings.
- separate Rx buffer tag from Tx buffer tag such that Tx tag
allows up-to 16 segments while Rx buffer tag only allows
single segment.
- it seems the controller has no alignment restrictions on Tx/Rx
buffers. Remove ETHER_ALIGN alignment restriction in Tx/Rx
buffers.
- created a spare Rx dma map which would be used to cope with
failure of loading a dma map.
- make sure to load full Tx/Rx descriptor size for Tx/Rx
descriptor dma maps, previously bfe(4) used to load single
descriptor size for each descriptor rings. I have no idea how
it could be run without problems.
- don't blindly cast bus_addr_t type to 32bits in bfe_dma_map().
- created bfe_dma_free() to free allocated dma memory/tags.
- make sure to invoke bus_dmamap_sync(9) before/after processing
descriptor rings/buffers. Because the hardware has severe dma
address space limitation, bounce-buffers would be always used
on systems with more than 1GB memory during
descriptors/buffers access.
- added Tx descriptor ring initialization function,
bfe_list_tx_init().
- moved producer/consumer index initialization to
bfe_list_tx_init() and bfe_list_rx_init() from
bfe_chip_reset().
- added bfe_discard_buf() which will update loaded descriptors
without unloading/reloading the dma map to speed up error
recovery.
- implemented Tx side bus_dmamap_load_mbuf_sg(9). The number of
segments allowed was chosen to be 16 which should be enough for
non-TSO capable hardwares. Setting SOF bit of Tx descriptor is
done in the last to avoid potential race.
- don't give up sending frames in bfe_start() until the hardware
lacks free descriptors.
- added XXX comment to second kick command and possible workaround.
- implemented Rx side bus_dmamap_load_mbuf_sg(9).
- removed bfe_dma_map_desc() as it's not needed anymore after
the conversion to bus_dmamap_load_mbuf_sg(9).
- added endianness support. With this change bfe(4) should work
on any architectures that can create bounce buffers within 1GB
address range.
- add missing bus_dmamap_sync() in bfe_tx_eof()/bfe_rx_eof().
o Use PCI_BAR instead of hardcoded value to set BARs.
Simplified register access with bus_write_4(9)/bus_read_4(9) and
removed bfe_btag, bfe_bhandle, bfe_vhandle in softc as it's not
used anymore.
o Reorder device detach logic such that bfe_detach() is also used
for handling driver attach failure case.
o Remove unnecessary KASSERT in bfe_detach().
o Remove bfe_rx_cnt, bfe_up, bfe_vpd_prodname, bfe_vpd_readonly in
softc. It's not used at all.
o Remove BFE_RX_RING_SIZE/BFE_RX_RING_SIZE/BFE_LINK_DOWN.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
Notes:
svn path=/head/; revision=181953
|
|
|
|
|
|
|
| |
manipulate the verbose description of a device.
Notes:
svn path=/head/; revision=181557
|
|
|
|
|
|
|
|
|
| |
pci_get_vendor() and pci_get_device() don't do configuration space
accessses so cahcing them makes no sense.
Pointed out by: jhb, imp, des
Notes:
svn path=/head/; revision=181556
|
|
|
|
| |
Notes:
svn path=/head/; revision=180954
|
|
|
|
|
|
|
|
| |
space access in device probe.
Also nuke referencing softc in device probe.
Notes:
svn path=/head/; revision=180952
|
|
|
|
|
|
|
|
| |
Don't hard code function name in device_printf() and use __func__.
While I'm here nuke bfe_unit in softc as it's not needed anymore.
Notes:
svn path=/head/; revision=180950
|
|
|
|
|
|
|
|
|
|
| |
ENOBUFS so callers can reuse previous mbuf.
Submitted by: Oleg (agile.quad AT gmail DOT com)
MFC after: 1 week
Notes:
svn path=/head/; revision=178687
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
o conversion to callout(9) API.
o add a missing driver lock in bfe_ifmedia_sts().
o use our callout to drive watchdog timer.
o restart Tx routine if pending queued packets are present in
watchdog handler.
o unarm watchdog timer only if there are no queued packets.
o don't blindly reset phy and let phy driver handle link change
request in bfe_init_locked().
o return the status of mii_mediachg() to caller in
bfe_ifmedia_upd(). Previously it always returned 0 to caller.
o add check for IFF_DRV_RUNNING flag as well as IFF_DRV_OACTIVE
in bfe_start_locked().
o implement miibus_statchg method that keeps track of current
link state changes as well as negotiated speed/duplex/
flow-control configuration.
Reprogram MAC to appropriate duplex state. Flow-control
configuration was also implemented but commented out at the
moment. The flow-control configuration will be enabled again
after we have general flow-control framework in mii layer.
Reported by: Yousif Hassan < yousif () alumni ! jmu ! edu >
Tesdted by: Yousif Hassan < yousif () alumni ! jmu ! edu >
Notes:
svn path=/head/; revision=175787
|
|
|
|
| |
Notes:
svn path=/head/; revision=173839
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
bus_setup_intr()
o add an int return code to all fast handlers
o retire INTR_FAST/IH_FAST
For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current
Reviewed by: many
Approved by: re@
Notes:
svn path=/head/; revision=166901
|
|
|
|
|
|
|
|
|
|
|
| |
bfe_init_locked() wasn't sufficient to bring the chip back to life, it also
required a call to bfe_chip_reset() during resume.
Tested by: Stepan Zastupov +redchrom at gmail+
MFC after: 1 week
Notes:
svn path=/head/; revision=164456
|
|
|
|
|
|
|
| |
it's unnecessary, as the TX/RX lists are static allocations.
Notes:
svn path=/head/; revision=159021
|
|
|
|
|
|
|
|
|
|
| |
- Reduce the number of RX and TX buffers bfe uses so that it does not use more
bounce buffers than busdma is willing to allow it to use
See if_bfe.c for comments on why this is now safe to do.
Notes:
svn path=/head/; revision=159015
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also use BUS_DMA_ALLOCNOW to be on the safe side.
2. Look for the Descriptor Error, and Descriptor Protocol Error flags from
the card, and down the interface if we detect either.
#1 (along with fixes to busdma) makes sure that this card works in all
memory situations. Prior to this change, it was just luck that 512 count
RX/TX lists were properly aligned. Now we can use any size of RX/TX lists
and still have them properly aligned.
#2 ensures that we don't get into an endless interrupt storm if busdma fails
us. Descriptor Protocol Error would occur if we misaligned the TX/RX rings,
and Descriptor Error would occur if we tried to give the card descriptors
or rings with addresses > 1G. Trying to reinitialize the card isn't going
to fix these errors, hence we don't try.
Notes:
svn path=/head/; revision=159013
|
|
|
|
|
|
|
| |
unnecessary.
Notes:
svn path=/head/; revision=158651
|
|
|
|
|
|
|
| |
Two users have reported problems due to the smaller list sizes.
Notes:
svn path=/head/; revision=158447
|