aboutsummaryrefslogtreecommitdiff
path: root/sys/dev/ipw
Commit message (Collapse)AuthorAgeFilesLines
* net80211: create IEEE80211_KEYBUF_128_SIZE / IEEE80211_MICBUF_128_SIZEAdrian Chadd2026-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The IEEE80211_KEYBUF_SIZE and IEEE80211_MICBUF_SIZE are sprinkled throughout the net80211 stack, ioctl API and drivers. This makes it challenging to (eventually) up IEEE80211_KEYBUF_SIZE to support 256 / 384 bit encryption as, well, it'll break every single driver and the ioctl API in doing so. So as part of this, let's start to separate out the current key/mic buffer size from what drivers and the ioctl layer are using. Drivers especially shouldn't be using these definitions as their key sizes are hardware / firmware API limits, not net80211 limits. Ideally drivers would define their own key buffer / mic buffer sizes and only copy in keys up to that length (and fail keys that are too large) but the current net80211 API isn't there yet. This doesn't yet change what defines / buffer sizes are used in the ioctl layer. I'm going to plan out some subsequent work to separate out those defines and ioctl APIs so they maintain using the 128 bit key/mic buffer sizes and will copy them in/out of any larger net80211 key buffer size in the future. Differential Revision: https://reviews.freebsd.org/D54593
* ipw: migrate to new net80211 encryption key APIAdrian Chadd2026-02-261-2/+3
| | | | | | | Migrate to the new encryption key API rather than poking at the key struct directly. Differential Revision: https://reviews.freebsd.org/D54480
* net80211: convert the rest of the native net80211 drivers to SEQNO_OFFLOADAdrian Chadd2025-09-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | * Convert the rest of the drivers to implement driver/offloaded sequence number handling. * For drivers that implement their own sequence number space handling for A-MPDU, only call ieee80211_output_seqno_assign() if the frame isn't tagged with M_AMPDU_MPDU, which mirrors the original net80211 sequence number behaviour. (Except of course, the assignment is now happening during final encap/transmit, not early in encap.) Locally tested (sta mode): * ath * iwn * bwi * bwn * iwm * otus * ral Differential Revision: https://reviews.freebsd.org/D50772 Okayed by: bz
* sys: convert ni->ni_txrate references use to the new net80211 APIAdrian Chadd2025-02-261-2/+2
| | | | | | | | | | | This just mechanically converts things. * For linuxkpi, it was just used for display. * For uath, it was just used for display, as firmware doesn't report it up. Differential Revision: https://reviews.freebsd.org/D48602 Reviewed by: bz, thj
* net80211: migrate FC0_TYPE_MASK / FC0_SUBTYPE_MASK frame type checks to macrosAdrian Chadd2024-11-171-1/+1
| | | | | | | | | | | | | * Add macros for the management and control frame type checks that I've come across in the drivers. * Delete some now old code (eg ath's ieee80211_is_action()) as there's now a macro for it. Local testing: * not yet, I have a lot of wifi devices to find and test against Differential Revision: https://reviews.freebsd.org/D47500
* Revert "Widen EPOCH(9) usage in PCI WLAN drivers."Bjoern A. Zeeb2023-12-011-3/+0
| | | | | | | | | This reverts commit b65f813c1ab99448278961c5ca80dc422b1eae29. As a side effect this also seems to fix wtap which seems to have lost the epoch over the input path in between. Sponsored by: The FreeBSD Foundation MFC after: 3 days
* sys: Remove $FreeBSD$: one-line .c patternWarner Losh2023-08-161-2/+0
| | | | Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
* sys: Remove $FreeBSD$: one-line .c comment patternWarner Losh2023-08-162-2/+0
| | | | Remove /^/[*/]\s*\$FreeBSD\$.*\n/
* spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSDWarner Losh2023-05-123-3/+3
| | | | | | | | | The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause. Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
* DrvAPI: Trivial mechanical conversions for various driversJustin Hibbits2022-12-211-3/+3
| | | | | | | | | | | | | | | | | Mechanically convert the following drivers, with trivial changes: * ipw(4) * igc(4) * enetc(4) * malo(4) * nfe(4) * bxe(4) * awg(4) * otus(4) * rtwn(4) * bnxt(4) * ath(4) Sponsored by: Juniper Networks, Inc.
* ipw: Remove unused devclass argument to DRIVER_MODULE.John Baldwin2022-05-061-3/+1
|
* Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)Pawel Biernacki2020-02-261-3/+4
| | | | | | | | | | | | | | | | | | | r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are still not MPSAFE (or already are but aren’t properly marked). Use it in preparation for a general review of all nodes. This is non-functional change that adds annotations to SYSCTL_NODE and SYSCTL_PROC nodes using one of the soon-to-be-required flags. Mark all obvious cases as MPSAFE. All entries that haven't been marked as MPSAFE before are by default marked as NEEDGIANT Approved by: kib (mentor, blanket) Commented by: kib, gallatin, melifaro Differential Revision: https://reviews.freebsd.org/D23718 Notes: svn path=/head/; revision=358333
* Widen EPOCH(9) usage in PCI WLAN drivers.Hans Petter Selasky2020-01-301-0/+3
| | | | | | | | | | | | | | Make sure all occurrences of ieee80211_input_xxx() in sys/dev are covered by a network epoch section. Do not depend on the interrupt handler nor any taskqueues being in a network epoch section. This patch should unbreak the PCI WLAN drivers after r357004. Pointy hat: glebius@ Sponsored by: Mellanox Technologies Notes: svn path=/head/; revision=357291
* Fix ieee80211_radiotap(9) usage in wireless drivers:Andriy Voskoboinyk2019-03-111-2/+4
| | | | | | | | | | | | | | | | | | | | | | | - Alignment issues: * Add missing __packed attributes + padding across all drivers; in most places there was an assumption that padding will be always minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) - padding was just missing. * Add __aligned(8) attribute for all Rx radiotap headers since they can contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so just drop the attribute here. Refresh ieee80211_radiotap(9) man page accordingly. - Since net80211 automatically updates channel frequency / flags in ieee80211_radiotap_chan_change() drop duplicate setup for these fields in drivers. Tested with Netgear WG111 v3 (urtw(4)), STA mode. MFC after: 2 weeks Notes: svn path=/head/; revision=344990
* ipw(4): reuse ieee80211_tx_complete functionAndriy Voskoboinyk2019-01-311-4/+1
| | | | | | | | | This should partially fix 'netstat -b -I wlan0' output MFC after: 1 week Notes: svn path=/head/; revision=343603
* Fix ipw_start(), where logic was reverted in r287197.Gleb Smirnoff2018-10-231-1/+1
| | | | | | | | PR: 232554 Submitted by: gl00my@mail.ru Notes: svn path=/head/; revision=339643
* Reapply, with minor tweaks, r338025, from the original commit:Warner Losh2018-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unused and easy to misuse PNP macro parameter Inspired by r338025, just remove the element size parameter to the MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to have correct pointer (or array) type. Since all invocations of the macro already had this property and the emitted PNP data continues to include the element size, there is no functional change. Mostly done with the coccinelle 'spatch' tool: $ cat modpnpsize0.cocci @normaltables@ identifier b,c; expression a,d,e; declarer MODULE_PNP_INFO; @@ MODULE_PNP_INFO(a,b,c,d, -sizeof(d[0]), e); @singletons@ identifier b,c,d; expression a; declarer MODULE_PNP_INFO; @@ MODULE_PNP_INFO(a,b,c,&d, -sizeof(d), 1); $ rg -l MODULE_PNP_INFO -- sys | \ xargs spatch --in-place --sp-file modpnpsize0.cocci (Note that coccinelle invokes diff(1) via a PATH search and expects diff to tolerate the -B flag, which BSD diff does not. So I had to link gdiff into PATH as diff to use spatch.) Tinderbox'd (-DMAKE_JUST_KERNELS). Approved by: re (glen) Notes: svn path=/head/; revision=338948
* Back out r338035 until Warner is finished churning GSoC PNP patchesConrad Meyer2018-08-191-1/+1
| | | | | | | | | | I was not aware Warner was making or planning to make forward progress in this area and have since been informed of that. It's easy to apply/reapply when churn dies down. Notes: svn path=/head/; revision=338037
* Remove unused and easy to misuse PNP macro parameterConrad Meyer2018-08-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Inspired by r338025, just remove the element size parameter to the MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to have correct pointer (or array) type. Since all invocations of the macro already had this property and the emitted PNP data continues to include the element size, there is no functional change. Mostly done with the coccinelle 'spatch' tool: $ cat modpnpsize0.cocci @normaltables@ identifier b,c; expression a,d,e; declarer MODULE_PNP_INFO; @@ MODULE_PNP_INFO(a,b,c,d, -sizeof(d[0]), e); @singletons@ identifier b,c,d; expression a; declarer MODULE_PNP_INFO; @@ MODULE_PNP_INFO(a,b,c,&d, -sizeof(d), 1); $ rg -l MODULE_PNP_INFO -- sys | \ xargs spatch --in-place --sp-file modpnpsize0.cocci (Note that coccinelle invokes diff(1) via a PATH search and expects diff to tolerate the -B flag, which BSD diff does not. So I had to link gdiff into PATH as diff to use spatch.) Tinderbox'd (-DMAKE_JUST_KERNELS). Notes: svn path=/head/; revision=338035
* Add PNP info to PCI attachment of ipw driverWarner Losh2018-07-081-0/+2
| | | | | | | | | | Reviewed by: imp, chuck Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com> Sponsored by: Google, Inc. (GSoC 2018) Differential Revision: https://reviews.freebsd.org/D15979 Notes: svn path=/head/; revision=336109
* sys/dev: further adoption of SPDX licensing ID tags.Pedro F. Giffuni2017-11-273-0/+6
| | | | | | | | | | | | | | | Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Notes: svn path=/head/; revision=326255
* ipw: switch to ieee80211_add_channel()Andriy Voskoboinyk2016-05-192-13/+42
| | | | | | | | | | - Convert to ieee80211_add_channel(). - Add ic_getradiocaps() method. Differential Revision: https://reviews.freebsd.org/D6236 Notes: svn path=/head/; revision=300239
* net80211 & wireless drivers: remove duplicate defines (noop)Adrian Chadd2015-09-221-3/+1
| | | | | | | | | | | | | | * IEEE80211_DIR_DSTODS(wh) -> IEEE80211_IS_DSTODS(wh). * N(a) -> nitems(a). * Remove LE_READ_2(p)/LE_READ_4(p) definitions (and include ieee80211_input.h instead). * <drvname>_TXOP_TO_US(txop) -> IEEE80211_TXOP_TO_US(txop). * Put IEEE80211_RV(v) into ieee80211_proto.h and remove local RV(v) definitions. Submitted by: Andriy Voskoboinyk <s3erios@gmail.com> Differential Revision: https://reviews.freebsd.org/D3705 Notes: svn path=/head/; revision=288087
* Replay r286410. Change KPI of how device drivers that provide wirelessGleb Smirnoff2015-08-272-148/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc. Notes: svn path=/head/; revision=287197
* Convert more ifp->if_softc -> ic->ic_softc.Adrian Chadd2015-08-171-16/+9
| | | | | | | | | | | These should be a big no-op. Tested: * make universe Notes: svn path=/head/; revision=286865
* Revert the wifi ifnet changes until things are more baked and tested.Adrian Chadd2015-08-082-95/+163
| | | | | | | | | | | | * 286410 * 286413 * 286416 The initial commit broke a variety of debug and features that aren't in the GENERIC kernels but are enabled in other platforms. Notes: svn path=/head/; revision=286437
* Change KPI of how device drivers that provide wireless connectivity interactGleb Smirnoff2015-08-072-163/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Details here: https://wiki.freebsd.org/projects/ifnet/net80211 Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances of problems are low. The wtap wasn't compilable even before this change. But the ndis driver is complex, and it is likely to be broken with this commit. Help with testing and debugging it is appreciated. Differential Revision: D2655, D2740 Sponsored by: Nginx, Inc. Sponsored by: Netflix Notes: svn path=/head/; revision=286410
* Set ic_softc in all 802.11 drivers. Not required right now, but will beGleb Smirnoff2015-05-251-0/+1
| | | | | | | | | | used quite soon. Sponsored by: Netflix Sponsored by: Nginx, Inc. Notes: svn path=/head/; revision=283537
* Don't compare array to NULL.Gleb Smirnoff2015-05-251-5/+2
| | | | | | | Found by: clang Notes: svn path=/head/; revision=283528
* Make net80211 drivers supply their device name to the net80211 layer, soGleb Smirnoff2015-05-251-0/+1
| | | | | | | | | | that the latter doesn't need to go through struct ifnet to get their name. Sponsored by: Netflix Sponsored by: Nginx, Inc. Notes: svn path=/head/; revision=283527
* Mechanically convert to if_inc_counter().Gleb Smirnoff2014-09-191-5/+5
| | | | Notes: svn path=/head/; revision=271849
* Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.Kevin Lo2014-01-081-2/+2
| | | | | | | | | | | | | | The origin of WEP comes from IEEE Std 802.11-1997 where it defines whether the frame body of MAC frame has been encrypted using WEP algorithm or not. IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates whether the frame is protected by a cryptographic encapsulation algorithm. Reviewed by: adrian, rpaulo Notes: svn path=/head/; revision=260444
* - Probe with BUS_PROBE_DEFAULT instead of 0.Marius Strobl2013-12-292-25/+15
| | | | | | | | | | | | | | | | - Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0 devices. - Use PCIR_BAR instead of a homegrown macro. - There's no need to keep track of resource IDs. - Quiesce the interrupt before actually detaching. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. - Nuke dupe $FreeBSD$. MFC after: 1 week Notes: svn path=/head/; revision=260062
* The r48589 promised to remove implicit inclusion of if_var.h soon. PrepareGleb Smirnoff2013-10-261-0/+1
| | | | | | | | | | | to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc. Notes: svn path=/head/; revision=257176
* Mechanically substitute flags from historic mbuf allocator withGleb Smirnoff2012-12-041-3/+3
| | | | | | | malloc(9) flags in sys/dev. Notes: svn path=/head/; revision=243857
* Use suspend/resume methods provided by net80211. This ensures that theBernhard Schmidt2012-03-231-6/+4
| | | | | | | | | | | | appropriate state handling takes place, not doing so results in the device doing nothing until manual intervention. Reviewed by: iwasaki Tested by: iwasaki (iwi) MFC after: 4 weeks Notes: svn path=/head/; revision=233387
* More conversions of drivers to use the PCI parent DMA tag.Scott Long2012-03-122-7/+24
| | | | Notes: svn path=/head/; revision=232874
* Fix some net80211 enum nits:Bernhard Schmidt2011-12-171-7/+7
| | | | | | | | | | | | | - ic_vap_create() uses an ieee80211_opmode argument - ieee80211_rate2media() takes an ieee80211_phymode argument - ieee80211_plcp2rate() takes an ieee80211_phytype argument - cast to enum ieee80211_protmode and ieee80211_roamingmode to silence compiler warnings Submitted by: arundel@ Notes: svn path=/head/; revision=228621
* Add module version to iwi/ipw/wpi and iwn.Bernhard Schmidt2011-05-311-0/+2
| | | | | | | | | | | | | | | | | | | | | The version is used to check if a module is already preset, not setting it results in: can't re-use a leaf (ipw)! module_register: module pci/ipw already exists! Module pci/ipw failed to register: 17 while trying to load the module due to an entry in loader.conf. With this commit we get the expected: module ipw already present! Reported by: Dru Lavigne, bz Tested by: bz MFC after: 1 week Notes: svn path=/head/; revision=222543
* Enable 5.5 and 11Mbit TX rates.Bernhard Schmidt2010-05-111-3/+3
| | | | | | | | | Reviewed by: sam Approved by: rpaulo (mentor) MFC after: 3 days Notes: svn path=/head/; revision=207926
* Add new tunable 'net.link.ifqmaxlen' to set default send interfaceMaxim Sobolev2010-05-031-2/+2
| | | | | | | | | | | | | queue length. The default value for this parameter is 50, which is quite low for many of today's uses and the only way to modify this parameter right now is to edit if_var.h file. Also add read-only sysctl with the same name, so that it's possible to retrieve the current value. MFC after: 1 month Notes: svn path=/head/; revision=207554
* Remove IPW_LOCK_DECL and fix various LORs.Bernhard Schmidt2010-04-172-22/+16
| | | | | | | Approved by: rpaulo (mentor) Notes: svn path=/head/; revision=206767
* Use iv_appie_wpa, with this commit WPA works again.Bernhard Schmidt2010-04-171-2/+2
| | | | | | | Approved by: rpaulo (mentor) Notes: svn path=/head/; revision=206766
* - Make ipw usable again by moving directly into ASSOC state.Bernhard Schmidt2010-04-171-1/+7
| | | | | | | | | | - No need to manually switch to RUN state, assoc response takes care of that. Approved by: rpaulo (mentor) Notes: svn path=/head/; revision=206765
* Pass correct RSSI to ieee80211_input*().Bernhard Schmidt2010-04-171-2/+2
| | | | | | | Approved by: rpaulo (mentor) Notes: svn path=/head/; revision=206764
* Fix comment about ipw_assoc and remove some whitespaces; no functionalBernhard Schmidt2010-04-171-6/+6
| | | | | | | | | changes. Approved by: rpaulo (mentor) Notes: svn path=/head/; revision=206763
* For ic_opmode switch cases, provide a default label with a printf sayingRui Paulo2009-07-101-0/+3
| | | | | | | | | this opmode is not supported. Approved by: re (kib) Notes: svn path=/head/; revision=195562
* Overhaul monitor mode handling:Sam Leffler2009-05-202-32/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa Notes: svn path=/head/; revision=192468
* Abort any scan on a fatal firmware. ic_scan_curchan is overridden to performAndrew Thompson2009-05-101-0/+3
| | | | | | | | the scan in firmware and this relies on the firmware to wake up the scan task on completion. Notes: svn path=/head/; revision=191956
* Drain the tasks before the interface stop call in case a restart was queued.Andrew Thompson2009-05-081-1/+1
| | | | Notes: svn path=/head/; revision=191912
generated by cgit v1.3 (git 2.53.0) at 2026-09-29 12:55:51 +0000