aboutsummaryrefslogtreecommitdiff
path: root/sys/mips/conf
Commit message (Expand)AuthorAgeFilesLines
* Introduce opt_netfpga.h and allow setting NF10BMAC_64BIT from mips kernelBjoern A. Zeeb2014-06-261-0/+1
* Hook the ISP/SAF1761 driver into MIPS kernel builds.Hans Petter Selasky2014-05-291-0/+9
* Remove duplicate:Sean Bruno2014-05-211-1/+0
* Let's just use the mib0 partition for our configurations pace. It'sAdrian Chadd2014-05-191-2/+3
* Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.Kenneth D. Merry2014-05-021-0/+1
* Add the initial version of if_nf10bmac(4), a driver to support anBjoern A. Zeeb2014-04-171-0/+5
* Change kernel/rootfs hints to use search patterns instead of absoluteSean Bruno2014-04-041-2/+2
* Add support for the Dlink DIR-825C1 74k MIPS router based on AtherosSean Bruno2014-04-032-0/+196
* For BERI on NetFPGA assume HZ=100 by default.Bjoern A. Zeeb2014-03-221-1/+4
* In kernel config files, it is supposed to be 'options<space><tab>' notWarner Losh2014-03-1833-346/+346
* * Add ethernet MAC configuration from the EEPROM for arge0/arge1Adrian Chadd2014-03-161-1/+7
* Populate the GPIO pins and GPIOLED configsSean Bruno2014-03-051-3/+72
* Update location of hints and name of the kernel we are building.Sean Bruno2014-03-052-5/+5
* Rename the Dlink 825 configuration file to indicate that this is for theSean Bruno2014-03-052-0/+0
* Add the DB120 specific hints for the AR8327.Adrian Chadd2014-02-261-24/+26
* Add the AR8327 bits to the DB120 config file.Adrian Chadd2014-02-241-8/+34
* Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIAChristian Brueffer2014-02-161-1/+0
* Enable use of the PCIe connected wifi on the DB120 (AR9344) board.Adrian Chadd2014-02-144-0/+20
* Add the ath0 EEPROM hints required to detect the on-chip wifi.Adrian Chadd2014-02-141-0/+10
* Fix the geom mappings for WR1043ND.Luiz Otavio O Souza2014-01-071-3/+3
* Add an FDT DTS and MDROOT kernel configuration for BERI on NetFPGA.Bjoern A. Zeeb2013-12-121-0/+28
* Add a configuration file and hints file for the Alfa Networks Hornet UBAdrian Chadd2013-10-252-0/+162
* BERI_SIM.hint is no longer used, remove it.Brooks Davis2013-10-231-26/+0
* Enable ATSE_CFI_HACK in BERI configs, stable MAC addresses are useful.Brooks Davis2013-10-221-0/+1
* Sync BERI kernel configs with P4:Brooks Davis2013-10-228-116/+122
* Remove the isf(4) driver. It was created by accident and is subset ofBrooks Davis2013-10-213-38/+0
* Now that all of the on-chip switch and basic platform support is updated,Adrian Chadd2013-10-161-0/+101
* Yes, this board has 128mb of RAM.Adrian Chadd2013-10-161-1/+1
* Mark AR934x based boards to be mips74k.Adrian Chadd2013-10-091-1/+1
* set ROOTDEVNAME to ada0 with no paritions. This makes it much more functionalSean Bruno2013-10-021-1/+1
* Bring in configuration for Buffalo Airstation WZR-300HP, Atheros basedSean Bruno2013-09-172-0/+244
* We have grown a bit too big lately. Shrinking the kernel for TP-LinkHiren Panchasara2013-09-171-4/+18
* Add 32-bit support for Gxemul's oldtestmips machine emulationOleksandr Tymoshenko2013-09-041-0/+61
* Add options GEOM_PART_GPT and options MSDOSFS to the DIR-825Sean Bruno2013-09-031-0/+3
* - Set proper KERNLOADADDROleksandr Tymoshenko2013-08-311-0/+3
* Add device PicoStation M2HP support.Hiren Panchasara2013-08-302-0/+171
* Add bpf(4) to config file to get dhclient workingOleksandr Tymoshenko2013-08-301-0/+1
* Add the default hints to make the GPIO pins, rf led and reset switch workLuiz Otavio O Souza2013-08-281-0/+18
* Some vendors store the mac addresses of arge(4) as a literal sring in theSean Bruno2013-08-231-3/+4
* Back out r253779 & r253786.David E. O'Brien2013-07-3114-18/+6
* Adjust magic numbers to allow attachment of ath(4) modules.Sean Bruno2013-07-311-2/+2
* device if_bridge gets me a bridge deviceSean Bruno2013-07-311-1/+1
* Decouple yarrow from random(4) device.David E. O'Brien2013-07-2914-6/+18
* Add some initial board support for the AR934x and the Qualcomm AtherosAdrian Chadd2013-07-214-0/+234
* Oops - fix bad hint numbering for the ART section.Adrian Chadd2013-07-041-5/+5
* Add in a configuration file and hints for the Engenius ENH-200.Adrian Chadd2013-07-042-0/+168
* Add the missing link back to the EEPROM firmware name.Adrian Chadd2013-07-041-0/+3
* Add the EEPROM start offset and size in so ath_ahb will use theAdrian Chadd2013-06-261-0/+5
* Add in the vendor / device id so the ath_ahb glue works.Adrian Chadd2013-06-261-0/+2
* Add the wireless support to the AR933x base kernel, as the supportAdrian Chadd2013-06-261-13/+14
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-21 10:04:54 +0000