#-*- tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# Port variables:
# USE_QT* - List of Qt modules to depend on, with optional '_build'
# and '_run' suffixes. Define it empty to include this file
# without depending on Qt ports.
# QT_DIST - The port belongs to the Qt distribution. Set to 'yes' for
# Qt 4, or to the distribution name(s) for newer versions.
# QT_NONSTANDARD - Suppress modification of configure and make environment.
#
# Global switches (for inclusion into /etc/make.conf):
# QT4_OPTIONS - A list of (Qt 4-only) global options; can be CUPS, NAS
# and/or QGTKSTYLE. If set, Qt will be built with support
# for:
# * Common UNIX Printing System (CUPS);
# * Network Audio System (NAS);
# * GTK+-based Qt theme (QGTKSTYLE).
.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)
Qt_Include_MAINTAINER= kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk
# Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5
QT4_VERSION?= 4.8.5
QT5_VERSION?= 5.2.0-beta1
QT_PREFIX?= ${LOCALBASE}
_QT_RELNAME= qt${_QT_VERSION:R:R}
_QT_VERSION= # empty
.for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver})
. if empty(_QT_VERSION)
_QT_VERSION= ${QT${ver}_VERSION}
. else
# Reject different USE_QT*.
IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
. endif
. endif
.endfor
.if empty(_QT_VERSION)
# The file was included without USE_QT*.
IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif
.if defined(QT_DIST)
QT_NONSTANDARD= yes
. if ! ${.MAKEFLAGS:MPREFIX=*}
PREFIX= ${QT_PREFIX}
. endif
MASTER_SITES= ${MASTER_SITE_QT}
# Useless, as it must be defined before including bsd.port.pre.mk (at least
# because of bsd.options.mk).
#PKGNAMEPREFIX?= ${_QT_RELNAME}-
DIST_SUBDIR= KDE
DISTINFO_FILE= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo
# Can go after a while.
CONFLICTS_BUILD=qt-3.* qt-copy-3.*
LICENSE?= LGPL21
. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif
# Stage support.
DESTDIRNAME= INSTALL_ROOT
. if ${_QT_VERSION:M4*}
MASTER_SITE_SUBDIR= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/
DISTNAME= qt-everywhere-opensource-src-${_QT_VERSION}
. else
. if ${_QT_VERSION:M*-*}
# Pre-releases.
MASTER_SITE_SUBDIR= development_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/
. else
MASTER_SITE_SUBDIR= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/
. endif
DISTNAME= ${QT_DIST:S,^,qt,:S,$,-opensource-src-${_QT_VERSION},}
DISTFILES= ${DISTNAME:S,$,${EXTRACT_SUFX},}
USE_XZ= yes
. if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.
QT_DIST= base declarative doc graphicaleffects imageformats \
multimedia quick1 quickcontrols script serialport svg tools \
translations webkit webkit-examples x11extras xmlpatterns
. endif
. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.
USES+= pkgconfig
# Use mkspecs installed in QMAKEPATH/mkspecs when building qtbase.
CONFIGURE_ENV+= QMAKEPATH="${QT_MKSPECDIR:H}"
MAKE_ENV+= QMAKEPATH="${QT_MKSPECDIR:H}"
. endif
# -nomake flags aren't enough.
EXTRACT_AFTER_ARGS?= ${DISTNAME:S,$,/examples,:S,^,--exclude ,} \
${DISTNAME:S,$,/tests,:S,^,--exclude ,}
. endif # ! ${_QT_VERSION:M4*}
CONFIGURE_ENV+= MAKE="${MAKE:T}"
CONFIGURE_ARGS+=-opensource -confirm-license \
-platform ${QMAKESPEC} \
-no-pch \
-prefix ${PREFIX} \
-bindir ${PREFIX}/${QT_BINDIR_REL} \
-headerdir ${PREFIX}/${QT_INCDIR_REL} \
-libdir ${PREFIX}/${QT_LIBDIR_REL} \
-plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \
-importdir ${PREFIX}/${QT_IMPORTDIR_REL} \
-datadir ${PREFIX}/${QT_DATADIR_REL} \
-docdir ${PREFIX}/${QT_DOCDIR_REL} \
-translationdir ${PREFIX}/${QT_L10NDIR_REL} \
-sysconfdir ${PREFIX}/${QT_ETCDIR_REL}
. if ${_QT_VERSION:M4*}
CONFIGURE_ARGS+=-fast \
-system-libjpeg -system-libpng \
-system-libmng -system-libtiff -system-zlib \
-no-phonon-backend \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/examples \
-demosdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/demos
. else
CONFIGURE_ARGS+=-dont-process \
-nomake examples -nomake tests \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. endif
. if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info
# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"
PLIST_SUB+= DEBUG=""
. else
CONFIGURE_ARGS+=-release -no-separate-debug-info
QMAKE_ARGS+= QT_CONFIG+="release" \
QT_CONFIG-="debug separate_debug_info"
PLIST_SUB+= DEBUG="@comment "
. endif
. if defined(WANT_QT_VERBOSE_CONFIGURE)
CONFIGURE_ARGS+=-verbose
. endif
. if ${QT_DIST} == "base" || ${_QT_VERSION:M4*}
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure
. if ${_QT_VERSION:M5*}
EXTRA_PATCHES+= ${.CURDIR:H:H}/devel/qt5-core/files/extrapatch-src__corelib__tools__qdatetime.cpp
. endif
. endif
# Override settings installed in qconfig.h and *.pri files. The flags will be
# installed along with the port, but have to be passed as arguments while
# building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups")
# are needed to disable some features.
. if !defined(${QT_MODNAME}) || empty(${QT_MODNAME})
# Used for both qconfig-*.h and qt_config_*.pri; it can't be empty.
QT_MODNAME= ${PORTNAME}
. endif
QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix).
QT_CONFIG?= # For *.pri files QT_CONFIG flags.
. if ${QT_DEFINES}
QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}"
. if ${QT_DEFINES:N-*}
# Use a script to cleanup qconfig-modules.h (see qt-post-install).
PKGDEINSTALL= ${WRKDIR}/pkg-deinstall
. endif
. endif
. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif
. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif
PLIST_SUB+= SHORTVER=${_QT_VERSION:R} \
FULLVER=${_QT_VERSION:C/-.*//}
.endif # defined(QT_DIST)
.if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${QT_PREFIX}" QMAKE="${QMAKE}" \
MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \
--with-qt-libraries=${QT_LIBDIR} \
--with-extra-includes=${LOCALBASE}/include \
--with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD)
.if ${_QT_VERSION:M4*}
QT_BINDIR_REL?= bin
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins
QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports
.endif
# A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests
# Not customizable.
.if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs
_QT_LIBVER= # empty
_QT_BINSUFX= -${_QT_RELNAME}
.else
QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs
_QT_LIBVER= ${_QT_VERSION:R:R}
_QT_BINSUFX= # empty
.endif
LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX}
LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX}
MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX}
RCC?= ${QT_BINDIR}/rcc
UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX}
QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX}
# Needed to redefine the qmake target for internal Qt configuration.
_QMAKE?= ${QMAKE}
QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}
# The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in *clang*) echo clang ;; *) echo g++ ;; esac)
# Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+= qmake:_env
PLIST_SUB+= QT_PREFIX="${QT_PREFIX}"
.for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC
QT_${dir}DIR= ${QT_PREFIX}/${QT_${dir}DIR_REL}
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
.endfor
.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)
.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)
Qt_Post_Include= bsd.qt.mk
_USE_QT_ALL= assistant clucene dbus declarative designer gui help \
imageformats linguist multimedia network opengl pixeltool \
qdbusviewer qmake script scripttools sql sql-ibase sql-mysql \
sql-odbc sql-pgsql sql-sqlite2 sql-sqlite3 svg testlib webkit \
xml xmlpatterns
_USE_QT4_ONLY= accessible assistant-adp assistantclient codecs-cn codecs-jp \
codecs-kr codecs-tw corelib demo doc graphicssystems-opengl \
help-tools iconengines inputmethods l10n makeqpf moc phonon \
phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \
qtestlib qvfb rcc uic uic3 xmlpatterns-tool
_USE_QT5_ONLY= buildtools concurrent core graphicaleffects linguisttools \
printsupport qdbus qdoc qev qml qmldevtools quick uitools \
widgets
accessible_PORT= accessibility/${_QT_RELNAME}-accessible
accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so
assistant_PORT= devel/${_QT_RELNAME}-assistant
assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX}
assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= ${QT_BINDIR}/assistant_adp
assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}AssistantClient.so
buildtools_PORT= devel/${_QT_RELNAME}-buildtools
buildtools_PATH= ${MOC}
clucene_PORT= textproc/clucene-${_QT_RELNAME}
clucene_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}CLucene.so
codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so
codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so
codecs-kr_PORT= korean/${_QT_RELNAME}-codecs-kr
codecs-kr_PATH= ${QT_PLUGINDIR}/codecs/libqkrcodecs.so
codecs-tw_PORT= chinese/${_QT_RELNAME}-codecs-tw
codecs-tw_PATH= ${QT_PLUGINDIR}/codecs/libqtwcodecs.so
concurrent_PORT= devel/${_QT_RELNAME}-concurrent
concurrent_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Concurrent.so
core_PORT= devel/${_QT_RELNAME}-core
core_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Core.so
corelib_PORT= devel/${_QT_RELNAME}-corelib
corelib_PATH= ${core_PATH}
dbus_PORT= devel/dbus-${_QT_RELNAME}
dbus_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}DBus.so
declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative
declarative_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Declarative.so
demo_PORT= misc/${_QT_RELNAME}-qtdemo
demo_PATH= ${QT_BINDIR}/qtdemo
designer_PORT= devel/${_QT_RELNAME}-designer
designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX}
doc_PORT= misc/${_QT_RELNAME}-doc
doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}
graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir
graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so
gui_PORT= x11-toolkits/${_QT_RELNAME}-gui
gui_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Gui.so
help_PORT= devel/${_QT_RELNAME}-help
help_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Help.so
help-tools_PORT= devel/${_QT_RELNAME}-help-tools
help-tools_PATH= ${QT_BINDIR}/qhelpgenerator
iconengines_PORT= graphics/${_QT_RELNAME}-iconengines
iconengines_PATH= ${QT_PLUGINDIR}/iconengines/libqsvgicon.so
imageformats_PORT= graphics/${_QT_RELNAME}-imageformats
imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so
inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so
linguist_PORT= devel/${_QT_RELNAME}-linguist
linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX}
linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LRELEASE}
l10n_PORT= misc/${_QT_RELNAME}-l10n
l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}
makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX}
moc_PORT= devel/${_QT_RELNAME}-moc
moc_PATH= ${MOC}
multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia
multimedia_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Multimedia.so
network_PORT= net/${_QT_RELNAME}-network
network_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Network.so
opengl_PORT= graphics/${_QT_RELNAME}-opengl
opengl_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}OpenGL.so
pixeltool_PORT= graphics/${_QT_RELNAME}-pixeltool
pixeltool_PATH= ${QT_BINDIR}/pixeltool
phonon_PORT= multimedia/phonon
phonon_PATH= ${QT_LIBDIR}/libphonon.so
phonon-gst_PORT= multimedia/phonon-gstreamer
phonon-gst_PATH= ${QT_PLUGINDIR}/phonon_backend/libphonon_gstreamer.so
porting_PORT= devel/${_QT_RELNAME}-porting
porting_PATH= ${QT_BINDIR}/qt3to4
printsupport_PORT= print/${_QT_RELNAME}-printsupport
printsupport_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}PrintSupport.so
qdbus_PORT= devel/${_QT_RELNAME}-qdbus
qdbus_PATH= ${QT_BINDIR}/qdbus
qdbusviewer_PORT= devel/${_QT_RELNAME}-qdbusviewer
qdbusviewer_PATH= ${QT_BINDIR}/qdbusviewer
qdoc_PORT= devel/${_QT_RELNAME}-qdoc
qdoc_PATH= ${QT_BINDIR}/qdoc
qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH= ${QT_BINDIR}/qdoc3
qev_PORT= x11/${_QT_RELNAME}-qev
qev_PATH= ${QT_BINDIR}/qev
qmake_PORT= devel/qmake${_QT_VERSION:R:R}
qmake_PATH= ${QMAKE}
qml_PORT= lang/${_QT_RELNAME}-qml
qml_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Qml.so
qmldevtools_PORT= devel/${_QT_RELNAME}-qmldevtools
qmldevtools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}QmlDevTools.a
qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH= ${QT_BINDIR}/qmlviewer
qt3support_PORT= devel/${_QT_RELNAME}-qt3support
qt3support_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}3Support.so
qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX}
qtestlib_PORT= ${testlib_PORT}
qtestlib_PATH= ${testlib_PATH}
quick_PORT= x11-toolkits/${_QT_RELNAME}-quick
quick_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Quick.so
qvfb_PORT= devel/${_QT_RELNAME}-qvfb
qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX}
rcc_PORT= devel/${_QT_RELNAME}-rcc
rcc_PATH= ${RCC}
script_PORT= devel/${_QT_RELNAME}-script
script_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Script.so
scripttools_PORT= devel/${_QT_RELNAME}-scripttools
scripttools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}ScriptTools.so
sql_PORT= databases/${_QT_RELNAME}-sql
sql_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Sql.so
sql-pgsql_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlpsql.so
.if ${_QT_VERSION:M4*}
sql-sqlite2_PORT= databases/${_QT_RELNAME}-sqlite-plugin
.endif
sql-sqlite3_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlite.so
.for db in ibase mysql odbc pgsql sqlite2 sqlite3
.if ${_QT_VERSION:M4*}
sql-${db}_PORT?= databases/${_QT_RELNAME}-${db}-plugin
.else
sql-${db}_PORT?= databases/${_QT_RELNAME}-sqldrivers-${db}
.endif
sql-${db}_PATH?= ${QT_PLUGINDIR}/sqldrivers/libqsql${db:C/^sql//}.so
.endfor
svg_PORT= graphics/${_QT_RELNAME}-svg
svg_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Svg.so
testlib_PORT= devel/${_QT_RELNAME}-testlib
testlib_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Test.so
uic_PORT= devel/${_QT_RELNAME}-uic
uic_PATH= ${UIC}
uic3_PORT= devel/${_QT_RELNAME}-uic3
uic3_PATH= ${QT_BINDIR}/uic3
uitools_PORT= devel/${_QT_RELNAME}-uitools
uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a
webkit_PORT= www/webkit-${_QT_RELNAME}
webkit_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}WebKit.so
widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets
widgets_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Widgets.so
xml_PORT= textproc/${_QT_RELNAME}-xml
xml_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Xml.so
xmlpatterns_PORT= textproc/${_QT_RELNAME}-xmlpatterns
xmlpatterns_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}XmlPatterns.so
xmlpatterns-tool_PORT= textproc/${_QT_RELNAME}-xmlpatterns-tool
xmlpatterns-tool_PATH= ${QT_BINDIR}/xmlpatterns
_USE_QT_ALL+= ${_USE_QT${_QT_VERSION:R:R}_ONLY}
.for comp in ${_USE_QT_ALL}
${comp}_BUILD_DEPENDS?= ${${comp}_PATH}:${PORTSDIR}/${${comp}_PORT}
${comp}_RUN_DEPENDS?= ${${comp}_PATH}:${PORTSDIR}/${${comp}_PORT}
${comp}_build_BUILD_DEPENDS?= ${${comp}_BUILD_DEPENDS}
${comp}_run_RUN_DEPENDS?= ${${comp}_RUN_DEPENDS}
_USE_QT_ALL_SUFFIXED+= ${comp} ${comp}_build ${comp}_run
.endfor
_USE_QT= ${USE_QT${_QT_VERSION:R:R}}
.for comp in ${_USE_QT:O:u}
. if ${_USE_QT_ALL_SUFFIXED:M${comp}}
BUILD_DEPENDS+= ${${comp}_BUILD_DEPENDS}
RUN_DEPENDS+= ${${comp}_RUN_DEPENDS}
. else
IGNORE?= can't be installed: unknown USE_QT${_QT_VERSION:R:R} component '${comp}' #'
. endif
.endfor
.if defined(QT_DIST) && ! ${_QT_VERSION:M4*}
. if ${QT_DIST} == "base"
# qtbase requires some tools to be symlinked to the build directory.
_QT_TOOLS= # empty
. if ${PORTNAME} != "qmake"
_QT_TOOLS+= ${QMAKE}
. endif
. if ${PORTNAME} != "buildtools"
_QT_TOOLS+= ${MOC} qdoc ${RCC}
. endif
. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif
. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}
. endif
pre-configure: qtbase-pre-configure
qtbase-pre-configure:
. if ${PORTNAME} != "qmake"
@${RM} -rf ${CONFIGURE_WRKSRC}/mkspecs
@${MKDIR} ${CONFIGURE_WRKSRC}/mkspecs
. endif
. for tool in ${_QT_TOOLS}
@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \
${TRUE}
. endfor
. if ${PORTNAME} != "qmake"
_QMAKE_WRKSRC= ${BUILD_WRKSRC}
QMAKE_SOURCE_PATH= ${_QMAKE_WRKSRC}
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake
post-configure: qmake-configure
. endif
. endif # ${QT_DIST} == "base"
pre-install: qt-pre-install
qt-pre-install:
# Search both in CONFIGURE_WRKSRC and WRKSRC, as the former is not
# a subdirectory of the latter for out-of-source builds.
@${FIND} ${WRKSRC} ${CONFIGURE_WRKSRC} -name "Makefile*" -type f | \
${XARGS} ${REINPLACE_CMD} -e 's,${PREFIX}/${QT_LIBDIR_REL}/pkgconfig,${PREFIX}/libdata/pkgconfig,g'
post-install: qt-post-install
qt-post-install:
. if ${QT_DEFINES:N-*}
# We can't use SUB_FILES with a shared pkg-deinstall.in.
# We need it to be a script instead of a group of @unexecs, otherwise
# qconfig-modules.h cleanup will be run in pre-deinstall stage, which is
# useless. This will probably be replaced by a Keywords/ script in the future.
@${SED} -e 's,%%QT_MODNAME%%,${QT_MODNAME},g' \
-e 's,%%QT_INCDIR%%,${QT_INCDIR},g' \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/${FILESDIR:T}/${PKGDEINSTALL:T}.in > \
${PKGDEINSTALL}
@${MKDIR} ${STAGEDIR}${QT_INCDIR}/QtCore/modules
@${ECHO_CMD} -n \
> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
. for def in ${QT_DEFINES:N-*:O:u}
@${ECHO_CMD} "#if !defined(QT_${def}) && !defined(QT_NO_${def})" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
${ECHO_CMD} "# define QT_${def}" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
@${ECHO_CMD} "#endif" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
@${ECHO_CMD} \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
. endfor
@${ECHO_CMD} "@cwd ${QT_PREFIX}" >> ${TMPPLIST}
@${ECHO_CMD} "${QT_INCDIR_REL}/QtCore/modules/qconfig-${QT_MODNAME}.h" \
>> ${TMPPLIST}
@${ECHO_CMD} "@exec echo '#include <QtCore/modules/qconfig-${QT_MODNAME}.h>' >> %D/${QT_INCDIR_REL}/QtCore/qconfig-modules.h" >> ${TMPPLIST}
@${ECHO_CMD} "@dirrmtry ${QT_INCDIR_REL}/QtCore/modules" >> ${TMPPLIST}
@${ECHO_CMD} "@dirrmtry ${QT_INCDIR_REL}/QtCore" >> ${TMPPLIST}
@${ECHO_CMD} "@dirrmtry ${QT_INCDIR_REL}" >> ${TMPPLIST}
. endif # ${QT_DEFINES:N-*}
. if ${QT_CONFIG:N-*}
@${MKDIR} ${STAGEDIR}${QT_MKSPECDIR}/modules
${ECHO_CMD} "QT_CONFIG += ${QT_CONFIG:N-*:O:u}" \
> ${STAGEDIR}${QT_MKSPECDIR}/modules/qt_config_${QT_MODNAME}.pri
@${ECHO_CMD} "@cwd ${QT_PREFIX}" >> ${TMPPLIST}
@${ECHO_CMD} "${QT_MKSPECDIR_REL}/modules/qt_config_${QT_MODNAME}.pri" \
>> ${TMPPLIST}
@${ECHO_CMD} "@dirrmtry ${QT_MKSPECDIR_REL}/modules" >> ${TMPPLIST}
@${ECHO_CMD} "@dirrmtry ${QT_MKSPECDIR_REL}" >> ${TMPPLIST}
@${ECHO_CMD} "@dirrmtry ${QT_ARCHDIR_REL}" >> ${TMPPLIST}
. endif # ${QT_CONFIG:N-*}
.endif # defined(QT_DIST) && ! ${_QT_VERSION:M4*}
.endif # defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)
