# -*- tab-width: 4; -*-
# ex: ts=4
#
# $FreeBSD$
#
.if !defined(_POSTMKINCLUDED) && !defined(Tcl_Pre_Include)
Tcl_Pre_Include= bsd.tcl.mk
Tcl_Include_MAINTAINER= mm@FreeBSD.org
# USE_TCL - Add library dependency on Tcl. If no version is given by the maintainer
# via the port or by the user via defined variable try to find the highest
# stable installed version.
# Available values: yes 86+ 85+ 84+ 83+ 85 84 83
# NOTE: - default value 85 is used in case of USE_TCL=yes
#
# USE_TCL_BUILD - Add buildtime dependency on Tcl (tclsh).
# Available values: see USE_TCL
# NOTE: - has no effect if USE_TCL is defined
#
# USE_TCL_RUN - Add runtime dependency on Tcl (tclsh).
# Available values: see USE_TCL
# NOTE: - has no effect if USE_TCL is defined
# - value is implied by USE_TCL_BUILD (if defined)
#
# USE_TCL_WRAPPER - Depend on the tclsh wrapper to run. Ports that do not explicitly require
# a specific tclsh version may use this.
# The tclsh wrapper script installs into ${LOCALBASE}/bin/tclsh
# NOTE: - USE_TCL_WRAPPER and USE_TCL can be used together
# - ports using the wrapper should support default Tcl (8.5)
##
# INVALID_TCL_VER - This variable contains a list of Tcl versions not supported by the port.
# This setting is effective only when USE_TCL is set to a range (e.g. 83+)
# WITH_TCL_VER - User defined global variable to set Tcl version
# This variable is effective only if USE_TCL is set to a range (e.g. 83+)
# and WITH_TCL_VER points inside that range.
# NOTE: INVALID_TCL_VER takes precedence
# <UNIQUENAME>_WITH_TCL_VER - User defined port specific variable to set Tcl version
##
# USE_TCL_THREADS - If defined, Tcl a threaded version of tcl is required.
# NOTE: support for threaded builds starts with version 84
# USE_TCL_NO_THREADS - If defined, port may not use a threaded Tcl, even if requested via
# USE_TCL_THREADS or WITH_TCL_THREADS
# WITH_TCL_THREADS - User defined variable to use Tcl with threads
# <UNIQUENAME>_WITH_TCL_THREADS - User defined port specific variable to require Tcl with threads
##
# TCL_VER - Detected by bsd.tcl.mk. Contains the version number of Tcl to be used.
#
##
# USE_TK - Add library dependency on Tk. If no version is given by the maintainer
# via the port or by the user via defined variable try to find the highest
# stable installed version.
# Avaliable values: yes 86+ 85+ 84+ 83+ 85 84 83
# NOTE: - overrides USE_TCL
# - default value 85 is used in case of USE_TK=yes
#
# USE_TK_BUILD - Add buildtime dependency on Tk (wish).
# Available values: see USE_TK
# NOTE: - has no effect if USE_TK is defined
#
# USE_TK_RUN - Add runtime dependency on Tk (wish).
# Available values: see USE_TK
# NOTE: - has no effect if USE_TK is defined
# - value is implied by USE_TK_BUILD (if defined)
#
# USE_TK_WRAPPER - Depend on the wish wrapper to run. Ports that do not explicitly require
# a specific wish version may use this.
# The wish wrapper script installs into ${LOCALBASE}/bin/wish
# NOTE: - USE_TK_WRAPPER and USE_TK can be used together.
# - ports using the wrapper should support default Tk (8.5)
##
# INVALID_TK_VER - This variable contains a list of Tk versions not supported by the port
# This setting is effective only when USE_TK is set to a range (e.g. 83+)
# WITH_TK_VER - User defined global variable to set Tk version.
# This variable is effective only if USE_TK is set to a range (e.g. 83+)
# and WITH_TK_VER points inside that range.
# NOTE: overrides WITH_TCL_VER.
# <UNIQUENAME>_WITH_TK_VER - User defined port specific variable to set Tk version
# NOTE: overrides <UNIQUENAME>_WITH_TCL_VER.
##
# USE_TK_THREADS - Tk has to obey tcl in threads. A threaded Tk requires
# a threaded Tcl and a non-threaded Tcl requires a non-threaded Tk.
# This variable defines USE_TCL_THREADS
# USE_TK_NO_THREADS - If defined, port may not use a threaded Tk, even if requested via
# USE_TK_THREADS or WITH_TK_THREADS. Defines USE_TCL_NO_THREADS
# WITH_TK_THREADS - User defined variable to use Tk with threads
# <UNIQUENAME>_WITH_TK_THREADS - User defined port specific variable to require Tk with threads
###
# TCL_LIBDIR - Path where tcl libraries can be found
#
# TCL_INCLUDEDIR - Path where tcl C headers can be found
##
# TK_LIBDIR - Path where tk libraries can be found
#
# TK_INCLUDEDIR - Path where tk C headers can be found
##
# TCLSH - Path to tclsh executable respecting Tcl version
# or to the tclsh wrapper if USE_TCL_WRAPPER is set
#
# WISH - Path to wish executable respecting Tk version
# or to the wish wrapper if USE_TK_WRAPPER is set
#
##
# PATCH_TCL_SCRIPTS - List of tcl scripts that need to be patched to replace
# tclsh calls with tclsh${TK_VER} calls. Also note that
# post-patch target is used.
#
# PATCH_TK_SCRIPTS - List of tcl scripts that need to be patched to replace
# wish calls with wish${TK_VER} calls. Also note that
# post-patch target is used.
# Set RUN_DEPENDS for wrappers
. if defined(USE_TCL_WRAPPER)
RUN_DEPENDS+= tclsh:${PORTSDIR}/lang/tcl-wrapper
. endif
. if defined(USE_TK_WRAPPER)
RUN_DEPENDS+= wish:${PORTSDIR}/x11-toolkits/tk-wrapper
. endif
# Process USE_TCL_BUILD and USE_TCL_RUN
.if !defined(USE_TCL)
. if defined(USE_TCL_RUN)
USE_TCL:= ${USE_TCL_RUN}
_TCL_RUN_DEPENDS= yes
. endif
. if defined(USE_TCL_BUILD)
USE_TCL:= ${USE_TCL_BUILD}
_TCL_BUILD_DEPENDS= yes
. endif
.endif
# Process USE_TK_BUILD and USE_TK_RUN
.if !defined(USE_TK)
. if defined(USE_TK_RUN)
USE_TK:= ${USE_TK_RUN}
_TK_RUN_DEPENDS= yes
. endif
. if defined(USE_TK_BUILD)
USE_TK:= ${USE_TK_BUILD}
_TK_BUILD_DEPENDS= yes
. endif
.endif
# Set WITH_TCL_THREADS or WITH_TK_THREADS if port-specific define
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TCL_THREADS)
WITH_TCL_THREADS= yes
. endif
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TK_THREADS)
WITH_TK_THREADS= yes
.endif
# If a threaded Tcl or Tk is requested we require a threaded Tcl
. if !defined(USE_TK_NO_THREADS) && !defined(USE_TCL_NO_THREADS)
. if defined(USE_TCL_THREADS) || defined(USE_TK_THREADS)
USE_TCL_THREADS= yes
. endif
. if defined(WITH_TK_THREADS)
WITH_TCL_THREADS= ${WITH_TK_THREADS}
. endif
. endif
# Override the global WITH_TCL_VER or WITH_TK_VER with the
# port specific <UNIQUENAME>_WITH_TCL_VER or <UNIQUENAME>_WITH_TK_VER
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TCL_VER)
WITH_TCL_VER:= ${${UNIQUENAME:U:S,-,_,}_WITH_TCL_VER}
. endif
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TK_VER)
WITH_TK_VER:= ${${UNIQUENAME:U:S,-,_,}_WITH_TK_VER}
. endif
# If USE_TK, WITH_TK_VER, INVALID_TK_VER is defined,
# set USE_TCL, WITH_TCL_VER, INVALID_TCL_VER to identical values
# we require the same version of Tcl for Tk
. if defined(USE_TK)
. if !defined(USE_TCL)
_TK_ONLY= yes
. endif
USE_TCL:= ${USE_TK}
. endif
. if defined(WITH_TK_VER)
WITH_TCL_VER:= ${WITH_TK_VER}
. endif
. if defined(INVALID_TK_VER)
INVALID_TCL_VER:= ${INVALID_TK_VER}
. endif
#
# Tcl part
#
. if defined(USE_TCL)
_TCL_DEFAULT_VERSION= 85
_TCL_VERSIONS= 86 85 84 83
_TCL_THREADS_VERSIONS= 86 85 84
_TCL_RANGE_VERSIONS= 86+ 85+ 84+ 83+
_TCL_THREADS_RANGE_VERSIONS= 86+ 85+ 84+
# For specifying [85, 84, ..]+
_TCL_83P= 83 84 85 86
_TCL_84P= 84 85 86
_TCL_85P= 85 86
_TCL_86P= 86
# Set the default Tcl version and check if USE_TCL=yes was given
. if ${USE_TCL} == "yes"
USE_TCL= ${_TCL_DEFAULT_VERSION}
. endif
# Support for obsolete 84-thread and 85-thread definitions
. if ${USE_TCL} == "84-thread" || ${USE_TCL} == "85-thread"
USE_TCL:= ${USE_TCL:S/-thread//}
USE_TCL_THREADS= yes
. endif
# Ignore WITH_TCL_THREADS if USE_TCL is
# not in _TCL_THREADS_VERSIONS or _TCL_RANGE_VERSIONS
. if defined(WITH_TCL_THREADS)
. for ver in ${_TCL_THREADS_VERSIONS} ${_TCL_RANGE_VERSIONS}
. if ${USE_TCL} == "${ver}"
USE_TCL_THREADS= yes
. endif
. endfor
. endif
# Check if a build with threads is required
. if !defined(USE_TCL_NO_THREADS) && !defined(USE_TK_NO_THREADS) && !defined(BUILDING_TCL_THREADS) && !defined(BUILDING_TK_THREADS)
. if defined(USE_TCL_THREADS)
_TCL_THREADS_PORT= -thread
_TCL_THREADS_SUFFIX= -threads
# Threaded Tcl/Tk accepts only ranges starting with 84+
# reset the range to 84+ if the value is lower
. for ver in ${_TCL_RANGE_VERSIONS}
. if ${USE_TCL} == "${ver}"
_TCL_T_BAD_RANGE= yes
. for tver in ${_TCL_THREADS_RANGE_VERSIONS}
. if ${USE_TCL} == "${tver}"
_TCL_T_BAD_RANGE= no
. endif
. endfor
. endif
. endfor
. if defined(_TCL_T_BAD_RANGE) && ${_TCL_T_BAD_RANGE} == "yes"
USE_TCL= 84+
. endif
. endif
. endif
_TCL_VER= no
# Check if we have user-defined WITH_TCL_VER and if it matches
# the range specified in port's USE_TCL or USE_TK
. if defined(WITH_TCL_VER)
. for ver in ${_TCL_RANGE_VERSIONS}
. if ${USE_TCL} == "${ver}" && ${_TCL_VER} == "no"
_MATCHED_TCL_VER:= ${USE_TCL:S/+//}
. for tcl in ${_TCL_${_MATCHED_TCL_VER}P}
. if ${WITH_TCL_VER} == ${tcl}
# Check if user supplied WITH_TCL is in the INVALID_TCL_VER list
_BRKTCL= no
. for iver in ${INVALID_TCL_VER}
. if ${WITH_TCL_VER} == ${iver}
_BRKTCL= yes
. endif
. endfor
# If WITH_TCL is not in the INVALID_TCL_VER list, use it
# otherwise take default from port
. if ${_BRKTCL} == "no"
_TCL_VER= ${WITH_TCL_VER}
USE_TCL= ${_TCL_VER}
. endif
. endif
. endfor
. endif
. endfor
. endif
# Check for highest installed Tcl (if e.g. 83+ is specified)
# The default version of Tcl counts as the highest
. if ${_TCL_VER} == "no"
. for ver in ${_TCL_RANGE_VERSIONS}
. if ${USE_TCL} == "${ver}" && ${_TCL_VER} == "no"
_MATCHED_TCL_VER:= ${USE_TCL:S/+//}
. for tcl in ${_TCL_${_MATCHED_TCL_VER}P}
# Skip versions we are incompatible with
_BRKTCL= no
. for iver in ${INVALID_TCL_VER}
_INVALID_VER= ${iver}
. if ${_INVALID_VER} == ${tcl}
_BRKTCL= yes
. endif
. endfor
. if ${_BRKTCL} == "no"
# We have matched a supported version
_TCL_VER_MATCH=${tcl}
# Check if the default version is supported
. if ${_TCL_VER_MATCH} == ${_TCL_DEFAULT_VERSION}
_TCL_SUPPORT_DEFAULT= yes
. endif
# Look for installed versions
. if exists(${LOCALBASE}/include/tcl${tcl:S/8/8./}/tcl.h)
_TCL_INST_VER=${tcl}
# Check if the default version is installed
. if ${_TCL_INST_VER} == ${_TCL_DEFAULT_VERSION}
_TCL_HAVE_DEFAULT= yes
. endif
. endif
. endif
. endfor
. endif
. endfor
. if defined(_MATCHED_TCL_VER)
. if defined(_TCL_INST_VER)
# Default version is installed
. if defined(_TCL_HAVE_DEFAULT)
USE_TCL= ${_TCL_DEFAULT_VERSION}
. else
# Default version is not installed, but another supported version is installed
USE_TCL= ${_TCL_INST_VER}
. endif
# No supported version is installed, we want to install the default version
. elif defined(_TCL_SUPPORT_DEFAULT)
USE_TCL= ${_TCL_DEFAULT_VERSION}
. elif defined(_TCL_VER_MATCH)
# Default version is not wanted, select next best match
USE_TCL= ${_TCL_VER_MATCH}
. else
# INVALID_[TCL|TK]_VER removes all choices from the USE_[TCL|TK] range
IGNORE= selection of a Tcl/Tk version is not possible. Please check USE_[TCL|TK] and INVALID_[TCL|TK]_VER
. endif
. endif
. endif
TCL_VER:= ${USE_TCL:S/8/8./}
# Check if a correct Tcl/Tk version was specified
_FOUND= no
. for ver in ${_TCL_VERSIONS}
. if ${USE_TCL} == "${ver}" && ${_FOUND} == "no"
_FOUND= yes
. endif
. endfor
. if ${_FOUND} == "yes" && defined(USE_TCL_THREADS)
_FOUND= no
_THREADED_NOT_FOUND= yes
. for ver in ${_TCL_THREADS_VERSIONS}
. if ${USE_TCL} == "${ver}" && ${_FOUND} == "no"
_FOUND= yes
. endif
. endfor
. endif
. if ${_FOUND} == "yes"
TCL_INCLUDEDIR= ${LOCALBASE}/include/tcl${TCL_VER}
TCL_LIBDIR= ${LOCALBASE}/lib/tcl${TCL_VER}${_TCL_THREADS_SUFFIX}
TCLSH= ${LOCALBASE}/bin/tclsh${TCL_VER}${_TCL_THREADS_SUFFIX}
# Add dependencies
. if !defined(_TK_ONLY)
. if !defined(_TCL_RUN_DEPENDS) && !defined(_TCL_BUILD_DEPENDS)
LIB_DEPENDS+= tcl${USE_TCL}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/lang/tcl${USE_TCL}${_TCL_THREADS_PORT}
. else
. if defined(_TCL_BUILD_DEPENDS)
BUILD_DEPENDS+= tclsh${TCL_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/lang/tcl${USE_TCL}${_TCL_THREADS_PORT}
. endif
. if defined(_TCL_RUN_DEPENDS)
RUN_DEPENDS+= tclsh${TCL_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/lang/tcl${USE_TCL}${_TCL_THREADS_PORT}
. endif
. endif
. endif
. elif defined(_THREADED_NOT_FOUND) && !defined(IGNORE)
IGNORE= the defined version of Tcl/Tk does not support threads: ${USE_TCL}
. elif !defined(IGNORE)
IGNORE= unknown Tcl/Tk version specified: ${USE_TCL}
. endif
#
# Tk part
#
. if defined(USE_TK)
# We now read the version numbers from the Tcl part
USE_TK:= ${USE_TCL}
TK_VER:= ${USE_TCL:S/8/8./}
. if !defined(_TK_RUN_DEPENDS) && !defined(_TK_BUILD_DEPENDS)
LIB_DEPENDS+= tk${USE_TK}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/x11-toolkits/tk${USE_TK}${_TCL_THREADS_PORT}
. else
. if defined(_TK_BUILD_DEPENDS)
BUILD_DEPENDS+= wish${TK_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/x11-toolkits/tk${USE_TK}${_TCL_THREADS_PORT}
. endif
. if defined(_TK_RUN_DEPENDS)
RUN_DEPENDS+= wish${TK_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/x11-toolkits/tk${USE_TK}${_TCL_THREADS_PORT}
. endif
. endif
TK_INCLUDEDIR= ${LOCALBASE}/include/tk${TK_VER}
TK_LIBDIR= ${LOCALBASE}/lib/tk${TK_VER}${_TCL_THREADS_SUFFIX}
WISH= ${LOCALBASE}/bin/wish${TK_VER}${_TCL_THREADS_SUFFIX}
. endif # defined(USE_TK)
. endif # defined(USE_TCL)
# (Re)set WISH and TCLSH to the wrapper, if defined
. if defined(USE_TCL_WRAPPER)
TCLSH= ${LOCALBASE}/bin/tclsh
. endif
. if defined(USE_TK_WRAPPER)
WISH= ${LOCALBASE}/bin/wish
. endif
.endif # !defined(_POSTMKINCLUDED) && !defined(Tcl_Pre_Include)
.if defined(_POSTMKINCLUDED) && !defined(Tcl_Post_Include)
Tcl_Post_Include= bsd.tcl.mk
. if defined(PATCH_TCL_SCRIPTS) || defined (PATCH_TK_SCRIPTS)
. if !target(post-patch)
post-patch:
. if defined(PATCH_TCL_SCRIPTS) && defined(TCLSH)
. for tcl_script in ${PATCH_TCL_SCRIPTS}
@${REINPLACE_CMD} -e 's,tclsh,${TCLSH},' ${WRKSRC}/${tcl_script}
. endfor
. endif
. if defined(PATCH_TK_SCRIPTS) && defined(WISH)
. for tk_script in ${PATCH_TK_SCRIPTS}
@${REINPLACE_CMD} -e 's,wish,${WISH},' ${WRKSRC}/${tk_script}
. endfor
. endif
. endif # !target(post-patch)
. endif # defined(PATCH_TCL_SCRIPTS) || defined (PATCH_TK_SCRIPTS)
.endif # defined(_POSTMKINCLUDED) && !defined(Tcl_Post_Include)
