aboutsummaryrefslogblamecommitdiff
path: root/net/miniupnpd/files/miniupnpd.conf.sample.in
blob: 987894e1039a90aa848f3e5769a522e8d4d116b2 (plain) (tree)
1
2
3
4
5
6
7
8
9
10









                                                                 

                                                                      

         










                                                            



                                                



                                                                            





                                                     







                                                                  




                                                   



                                                         













                                                                  
# WAN network interface
ext_ifname=ed0
# if the WAN interface has several IP addresses, you
# can specify the one to use below
#ext_ip=

# there can be multiple listening ips for receiving SSDP traffic.
# the 1st IP is also used for UPnP Soap traffic.
#listening_ip= 192.168.0.61 
listening_ip=10.0.2.1

# port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
port=5555

# path to the unix socket used to communicate with MiniSSDPd
# If running, MiniSSDPd will manage M-SEARCH answering.
# default is /var/run/minissdpd.sock
#minissdpdsocket=/var/run/minissdpd.sock

# enable NAT-PMP support (default is no)
#enable_natpmp=no

# lease file location
#lease_file=/var/log/upnp.leases

# bitrates reported by daemon in bits per second
bitrate_up=131072
bitrate_down=524288

# "secure" mode : when enabled, UPnP client are allowed to add mappings only
# to their IP. (default is yes)
#secure_mode=yes

# default presentation url is http address on port 80
#presentation_url=

# report system uptime instead of daemon uptime
system_uptime=yes

# unused rules cleaning.
# never remove any rule before this threshold for the number
# of redirections is exceeded. default to 20
#clean_ruleset_threshold=10
# clean process work interval in seconds. default to 0 (disabled).
# a 600 seconds (10 minutes) interval makes sense
clean_ruleset_interval=600

# notify interval in seconds default is 30 seconds.
#notify_interval=240

# log packets in pf
#packet_log=no
# ALTQ queue in pf
# filter rules must be used for this to be used.
# compile with PF_ENABLE_FILTER_RULES (see config.h file)
#queue=queue_name1

# uuid : generated by the install a new one can be created with
# uuidgen
uuid=%%UUID%%

# UPnP permission rules
# (allow|deny) (external port range) ip/mask (internal port range)
# A port range is <min port>-<max port> or <port> if there is only
# one port in the range.
# ip/mask format must be nn.nn.nn.nn/nn
allow 1024-65535 10.0.2.0/24 1024-65535
allow 1024-65535 10.0.2.0/24 1024-65535
deny 0-65535 0.0.0.0/0 0-65535