Update the instruction and description of the u-boot ports which use

u-boot-master.

Submitted by:		manu
Differential Revision:	D15883

24 files changed, 124 insertions, 225 deletions

diff --git a/sysutils/u-boot-a13-olinuxino/pkg-descr b/sysutils/u-boot-a13-olinuxino/pkg-descr
index 49a753e2363e..7a9812f13746 100644
--- a/sysutils/u-boot-a13-olinuxino/pkg-descr
+++ b/sysutils/u-boot-a13-olinuxino/pkg-descr
@@ -1,16 +1,13 @@
 U-Boot loader for A13 Olinuxino.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-a13-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-a13-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
-   partition to address 0x42000000, and launches it. If ubldr.bin is
-   not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-a64-olinuxino/pkg-descr b/sysutils/u-boot-a64-olinuxino/pkg-descr
index 05f9c41359d3..3cdc648a2e1e 100644
--- a/sysutils/u-boot-a64-olinuxino/pkg-descr
+++ b/sysutils/u-boot-a64-olinuxino/pkg-descr
@@ -4,6 +4,6 @@ To install this bootloader on an sdcard just do:
 dd if=/usr/local/share/u-boot/u-boot-a64-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
 WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-bananapi/pkg-descr b/sysutils/u-boot-bananapi/pkg-descr
index 6a1701888400..3db9dd2d69ca 100644
--- a/sysutils/u-boot-bananapi/pkg-descr
+++ b/sysutils/u-boot-bananapi/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Banana Pi.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-bananapi/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
-   using the fdtfile env variable.  ubldr loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on Banana Pi, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-bananapim2/pkg-descr b/sysutils/u-boot-bananapim2/pkg-descr
index e3f7d73edb49..8e4a103a80a8 100644
--- a/sysutils/u-boot-bananapim2/pkg-descr
+++ b/sysutils/u-boot-bananapim2/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Banana Pi M2.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-bananapim2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
-   using the fdtfile env variable.  ubldr loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on Banana Pi, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-beaglebone/pkg-descr b/sysutils/u-boot-beaglebone/pkg-descr
index 0b4d0acc2152..d1a7e5e0cbd5 100644
--- a/sysutils/u-boot-beaglebone/pkg-descr
+++ b/sysutils/u-boot-beaglebone/pkg-descr
@@ -5,19 +5,10 @@ partition on an SD card or the eMMC.  Normally this is partition 1, but
 different partitions can be set with U-Boot environment variables.
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file uboot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
-   using the fdtfile env variable.  ubldr loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads ELF ubldr from file bbubldr on the FAT partition
-   to address 0x88000000, and launches it.
-
-Note: prefixing the boot files with 'bb' allows building
-images with boot bits for more than one board.
+ * API features are enabled.
+ * A boot.scr (U-Boot scripts ) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on BeagleBone or BeagleBone Black, see
- https://wiki.freebsd.org/FreeBSD/arm/BeagleBone
+https://wiki.freebsd.org/FreeBSD/arm/BeagleBone
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-chip/pkg-descr b/sysutils/u-boot-chip/pkg-descr
index eb9e30f7a0cb..7b34cb0fc5cc 100644
--- a/sysutils/u-boot-chip/pkg-descr
+++ b/sysutils/u-boot-chip/pkg-descr
@@ -1,16 +1,13 @@
 U-Boot loader for NextThingCo CHIP.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-chip/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-chip/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
-   partition to address 0x42000000, and launches it. If ubldr.bin is
-   not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-cubieboard/pkg-descr b/sysutils/u-boot-cubieboard/pkg-descr
index 825d11bfdd52..793c471b6b13 100644
--- a/sysutils/u-boot-cubieboard/pkg-descr
+++ b/sysutils/u-boot-cubieboard/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Cubieboard.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-cubieboard/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
-   using the fdtfile env variable.  ubldr loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on Cubieboard, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-cubieboard2/pkg-descr b/sysutils/u-boot-cubieboard2/pkg-descr
index da54cfc0c188..2827844780ca 100644
--- a/sysutils/u-boot-cubieboard2/pkg-descr
+++ b/sysutils/u-boot-cubieboard2/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Cubieboard2.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-cubieboard2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
-   using the fdtfile env variable.  ubldr loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on Cubieboard, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-duovero/pkg-descr b/sysutils/u-boot-duovero/pkg-descr
index 11090caca2cb..ef25cc184dd1 100644
--- a/sysutils/u-boot-duovero/pkg-descr
+++ b/sysutils/u-boot-duovero/pkg-descr
@@ -5,17 +5,10 @@ partition on an SD card. Normally this is partition 1, but different
 partitions can be set with U-Boot environment variables.
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file uboot.env on the FAT partition.
- * The DTB file name is passed to ubldr using the fdtfile env variable.
-   The default is omap4-duovero-parlor.dtb for a Parlor expansion board.
-   ubldr loads the DTB from /boot/dtb/ on the FreeBSD partition.
-   (Not tested)
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
-   to address 0x88000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Duovero, see
- https://wiki.freebsd.org/FreeBSD/arm/Duovero
+https://wiki.freebsd.org/FreeBSD/arm
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-nanopi-m1plus/pkg-descr b/sysutils/u-boot-nanopi-m1plus/pkg-descr
index 7e0f3dadb074..c5a4316187b9 100644
--- a/sysutils/u-boot-nanopi-m1plus/pkg-descr
+++ b/sysutils/u-boot-nanopi-m1plus/pkg-descr
@@ -1,16 +1,13 @@
 U-Boot loader for NanoPi M1 Plus.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-nanopi-m1plus/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
-   partition to address 0x42000000, and launches it. If ubldr.bin is
-   not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on NanoPi Neo, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-nanopi-neo-air/pkg-descr b/sysutils/u-boot-nanopi-neo-air/pkg-descr
index e1422cdc5dd9..00675ee32a0f 100644
--- a/sysutils/u-boot-nanopi-neo-air/pkg-descr
+++ b/sysutils/u-boot-nanopi-neo-air/pkg-descr
@@ -1,16 +1,13 @@
 U-Boot loader for NanoPi Neo Air.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-nanopi-neo-air/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
-   partition to address 0x42000000, and launches it. If ubldr.bin is
-   not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on NanoPi Neo, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-nanopi-neo/pkg-descr b/sysutils/u-boot-nanopi-neo/pkg-descr
index ec59666b0563..9219edfaf208 100644
--- a/sysutils/u-boot-nanopi-neo/pkg-descr
+++ b/sysutils/u-boot-nanopi-neo/pkg-descr
@@ -1,16 +1,13 @@
 U-Boot loader for NanoPi Neo.
 
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-nanopi-neo/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
-   partition to address 0x42000000, and launches it. If ubldr.bin is
-   not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
-For information about running FreeBSD on NanoPi Neo, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-olimex-a20-som-evb/pkg-descr b/sysutils/u-boot-olimex-a20-som-evb/pkg-descr
index 67d092c2dee3..52b0b424fa8e 100644
--- a/sysutils/u-boot-olimex-a20-som-evb/pkg-descr
+++ b/sysutils/u-boot-olimex-a20-som-evb/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Olimex A20 SOM EVB.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-olimex-a20-som-evb/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-olimex-a20-som-evb/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-olinuxino-lime/pkg-descr b/sysutils/u-boot-olinuxino-lime/pkg-descr
index 8087c1c58861..03861254e521 100644
--- a/sysutils/u-boot-olinuxino-lime/pkg-descr
+++ b/sysutils/u-boot-olinuxino-lime/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Olinuxino Lime.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-olinuxino-lime/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-olinuxino-lime/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-orangepi-one/pkg-descr b/sysutils/u-boot-orangepi-one/pkg-descr
index 77fa39002ac9..9c7b8345e534 100644
--- a/sysutils/u-boot-orangepi-one/pkg-descr
+++ b/sysutils/u-boot-orangepi-one/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for OrangePi One.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-orangepi-one/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-one/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-orangepi-pc/pkg-descr b/sysutils/u-boot-orangepi-pc/pkg-descr
index 60a91bd3ddda..4366045e1570 100644
--- a/sysutils/u-boot-orangepi-pc/pkg-descr
+++ b/sysutils/u-boot-orangepi-pc/pkg-descr
@@ -1,9 +1,13 @@
 U-Boot loader and related files for the OrangePi PC
 
-To install this bootloader on an sdcard just do:
-dd if=/usr/local/share/u-boot/u-boot-orangepi-pc/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-pc/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
+
+This version is patched so that:
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
 WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-orangepi-pc2/pkg-descr b/sysutils/u-boot-orangepi-pc2/pkg-descr
index 2438e860d4f4..72bbc1769c78 100644
--- a/sysutils/u-boot-orangepi-pc2/pkg-descr
+++ b/sysutils/u-boot-orangepi-pc2/pkg-descr
@@ -1,9 +1,9 @@
 U-Boot loader and related files for the OrangePi PC2
 
 To install this bootloader on an sdcard just do:
-dd if=/usr/local/share/u-boot/u-boot-orangepi-pc2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-pc2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
 WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-orangepi-plus-2e/pkg-descr b/sysutils/u-boot-orangepi-plus-2e/pkg-descr
index aa00d441c9d2..3b8e0c008966 100644
--- a/sysutils/u-boot-orangepi-plus-2e/pkg-descr
+++ b/sysutils/u-boot-orangepi-plus-2e/pkg-descr
@@ -1,20 +1,13 @@
 U-Boot loader for OrangePi Plus2E.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-orangepi-plus-2e/u-boot-sunxi-with-spl.bin \
-	of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-plus-2e/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-orangepi-zero/pkg-descr b/sysutils/u-boot-orangepi-zero/pkg-descr
index 0d85d15bd54a..0ea6f7f747ec 100644
--- a/sysutils/u-boot-orangepi-zero/pkg-descr
+++ b/sysutils/u-boot-orangepi-zero/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for OrangePi Zero.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-orangepi-zero/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-zero/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-pandaboard/pkg-descr b/sysutils/u-boot-pandaboard/pkg-descr
index e6f708ff9192..7cd5f453b27a 100644
--- a/sysutils/u-boot-pandaboard/pkg-descr
+++ b/sysutils/u-boot-pandaboard/pkg-descr
@@ -5,17 +5,10 @@ partition on an SD card.  Normally this is partition 1, but different
 partitions can be set with U-Boot environment variables.
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file uboot.env on the FAT partition.
- * The DTB file name is passed to ubldr using the fdtfile env variable.
-   It defaults to omap4-panda.dtb unless you override it. ubldr loads
-   the DTB from /boot/dtb/ on the FreeBSD partition.
-   (Not tested)
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
-   to address 0x88000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot scripts ) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on the PandaBoard, see
- https://wiki.freebsd.org/FreeBSD/arm/PandaBoard
+https://wiki.freebsd.org/FreeBSD/arm/PandaBoard
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-pcduino3/pkg-descr b/sysutils/u-boot-pcduino3/pkg-descr
index 21856bc6ca68..dad0b627ece4 100644
--- a/sysutils/u-boot-pcduino3/pkg-descr
+++ b/sysutils/u-boot-pcduino3/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for pcDuino3
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-pcduino3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-pcduino3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr b/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
index fda7b28086ed..0c37e2bfdc3c 100644
--- a/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
+++ b/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
@@ -1,19 +1,13 @@
 U-Boot loader for Banana Pi M3.
 
 To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-sinovoip-bpi-m3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-sinovoip-bpi-m3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
 
 This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
-   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
-   the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
-   to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included 
 
 For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
 
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-zedboard/pkg-descr b/sysutils/u-boot-zedboard/pkg-descr
index da2c7d709ddb..89d5f707d54a 100644
--- a/sysutils/u-boot-zedboard/pkg-descr
+++ b/sysutils/u-boot-zedboard/pkg-descr
@@ -3,10 +3,10 @@ U-Boot loader for the Xilinx Zynq-based Zedboard.
 To install this bootloader, copy the files in the share/u-boot/u-boot-zedboard
 directory to the first partition, formatted as FAT16 or FAT32, on an SD card.
 
-This version is patched as follows:
- * ELF and API features are enabled.
+This version is patched so that:
+ * API features are enabled.
 
 For information about running FreeBSD on Xilinx Zynq SoCs, see
-WWW: https://wiki.freebsd.org/FreeBSD/arm/Zedboard
+https://wiki.freebsd.org/FreeBSD/arm/Zedboard
 
-For general information about U-Boot see WWW: https://www.denx.de/wiki/U-Boot
+WWW: https://www.denx.de/wiki/U-Boot
diff --git a/sysutils/u-boot-zybo/pkg-descr b/sysutils/u-boot-zybo/pkg-descr
index da2c7d709ddb..89d5f707d54a 100644
--- a/sysutils/u-boot-zybo/pkg-descr
+++ b/sysutils/u-boot-zybo/pkg-descr
@@ -3,10 +3,10 @@ U-Boot loader for the Xilinx Zynq-based Zedboard.
 To install this bootloader, copy the files in the share/u-boot/u-boot-zedboard
 directory to the first partition, formatted as FAT16 or FAT32, on an SD card.
 
-This version is patched as follows:
- * ELF and API features are enabled.
+This version is patched so that:
+ * API features are enabled.
 
 For information about running FreeBSD on Xilinx Zynq SoCs, see
-WWW: https://wiki.freebsd.org/FreeBSD/arm/Zedboard
+https://wiki.freebsd.org/FreeBSD/arm/Zedboard
 
-For general information about U-Boot see WWW: https://www.denx.de/wiki/U-Boot
+WWW: https://www.denx.de/wiki/U-Boot