My poor English in pkg-descr was corrected

Submitted by: imp

19 files changed, 144 insertions, 135 deletions

diff --git a/chinese/mule-freewnn/pkg-descr b/chinese/mule-freewnn/pkg-descr
index c626ff4f73f6..2f203581f791 100644
--- a/chinese/mule-freewnn/pkg-descr
+++ b/chinese/mule-freewnn/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Chinese support, using FreeWnn as
-default. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using FreeWnn, too.
+This package is built with Chinese support, using FreeWnn.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/editors/mule-common/pkg-descr b/editors/mule-common/pkg-descr
index 5a3d397da9f1..aaf5adb4637f 100644
--- a/editors/mule-common/pkg-descr
+++ b/editors/mule-common/pkg-descr
@@ -1,8 +1,8 @@
-This is emacs lisp files, info pages, and so on (except executables)
-for mule-2.3, a multilingual editor based on emacs-19.34.
+This package contains emacs lisp files, info pages, and so on (except
+executables) for mule-2.3, a multilingual editor based on emacs-19.34.
 
-You must install one of packages, mule-2.3, ja-mule-*-2.3 (
-ja-mule-canna-2.3, ja-mule-canna+sj3-2.3, etc.), zh-mule-freewnn-2.3
+You must install one of packages, mule-2.3, ja-mule-*-2.3 
+(ja-mule-canna-2.3, ja-mule-canna+sj3-2.3, etc.), zh-mule-freewnn-2.3
 and ko-mule-freewnn-2.3, each of which contains only the executables
 for mule-2.3.
 
diff --git a/japanese/mule-canna+freewnn+sj3/pkg-descr b/japanese/mule-canna+freewnn+sj3/pkg-descr
index bb60893c40af..22cd09797eeb 100644
--- a/japanese/mule-canna+freewnn+sj3/pkg-descr
+++ b/japanese/mule-canna+freewnn+sj3/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna, sj3(*1) or
-FreeWnn. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using FreeWnn, too.
+This package is built with Japanese support, using Canna, sj3(*1) or FreeWnn.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,14 +18,14 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
 
 [Notice]
 Mr. Yoshio KATAYAMA <kate@pfu.co.jp> fixed many bugs for mule-2.3.
-Patches for those are in ' mule-2.3-19.34.patch-YYMMDD.tar.gz' and are
+Patches for those are in 'mule-2.3-19.34.patch-YYMMDD.tar.gz' and are
 applied in this port.
 
 - S. Taoka
diff --git a/japanese/mule-canna+freewnn/pkg-descr b/japanese/mule-canna+freewnn/pkg-descr
index dfbe5570de8d..1904d8bd4406 100644
--- a/japanese/mule-canna+freewnn/pkg-descr
+++ b/japanese/mule-canna+freewnn/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna or
-FreeWnn. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using FreeWnn, too.
+This package is built with Japanese support, using Canna or FreeWnn.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-canna+sj3+wnn6/pkg-descr b/japanese/mule-canna+sj3+wnn6/pkg-descr
index b308c78cb688..b3d7a60de4ab 100644
--- a/japanese/mule-canna+sj3+wnn6/pkg-descr
+++ b/japanese/mule-canna+sj3+wnn6/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna, sj3(*1),
-Wnn4 or Wnn6. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using Canna, sj3(*1) or Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-canna+sj3+wnn7/pkg-descr b/japanese/mule-canna+sj3+wnn7/pkg-descr
index b308c78cb688..b3d7a60de4ab 100644
--- a/japanese/mule-canna+sj3+wnn7/pkg-descr
+++ b/japanese/mule-canna+sj3+wnn7/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna, sj3(*1),
-Wnn4 or Wnn6. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using Canna, sj3(*1) or Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-canna+sj3/pkg-descr b/japanese/mule-canna+sj3/pkg-descr
index 033249146a2b..8cd1a81f85bb 100644
--- a/japanese/mule-canna+sj3/pkg-descr
+++ b/japanese/mule-canna+sj3/pkg-descr
@@ -1,10 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
 This package is built with Japanese support, using Canna or sj3.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -15,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-canna+wnn6/pkg-descr b/japanese/mule-canna+wnn6/pkg-descr
index 647d9fb71ffa..7c1ec97b51c0 100644
--- a/japanese/mule-canna+wnn6/pkg-descr
+++ b/japanese/mule-canna+wnn6/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna, Wnn4 or
-Wnn6. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using Canna or Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-canna+wnn7/pkg-descr b/japanese/mule-canna+wnn7/pkg-descr
index 647d9fb71ffa..7c1ec97b51c0 100644
--- a/japanese/mule-canna+wnn7/pkg-descr
+++ b/japanese/mule-canna+wnn7/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna, Wnn4 or
-Wnn6. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using Canna or Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-canna/pkg-descr b/japanese/mule-canna/pkg-descr
index c33e8e6d21d3..7e05201e796f 100644
--- a/japanese/mule-canna/pkg-descr
+++ b/japanese/mule-canna/pkg-descr
@@ -1,10 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Canna as default.
+This package is built with Japanese support, using Canna.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -15,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-freewnn+sj3/pkg-descr b/japanese/mule-freewnn+sj3/pkg-descr
index 8c5c0742fa2d..270128237356 100644
--- a/japanese/mule-freewnn+sj3/pkg-descr
+++ b/japanese/mule-freewnn+sj3/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using sj3(*1) or
-FreeWnn. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using FreeWnn, too.
+This package is built with Japanese support, using sj3(*1) or FreeWnn.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-freewnn/pkg-descr b/japanese/mule-freewnn/pkg-descr
index dfbb99e6aaed..41c4b98eb400 100644
--- a/japanese/mule-freewnn/pkg-descr
+++ b/japanese/mule-freewnn/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using FreeWnn as default. It
-is supported input methods, jeonkak, hangul for Korean(Hanja), and
-quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using FreeWnn, too.
+This package is built with Japanese support, using FreeWnn.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-sj3+wnn6/pkg-descr b/japanese/mule-sj3+wnn6/pkg-descr
index 1c9065cdd650..a48459d761ee 100644
--- a/japanese/mule-sj3+wnn6/pkg-descr
+++ b/japanese/mule-sj3+wnn6/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using sj3(*1), Wnn4 or
-Wnn6. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using sj3(*1) or Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-sj3+wnn7/pkg-descr b/japanese/mule-sj3+wnn7/pkg-descr
index 1c9065cdd650..a48459d761ee 100644
--- a/japanese/mule-sj3+wnn7/pkg-descr
+++ b/japanese/mule-sj3+wnn7/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using sj3(*1), Wnn4 or
-Wnn6. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using sj3(*1) or Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-sj3/pkg-descr b/japanese/mule-sj3/pkg-descr
index 61dca749dbd7..8b84908911b4 100644
--- a/japanese/mule-sj3/pkg-descr
+++ b/japanese/mule-sj3/pkg-descr
@@ -1,10 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using SJ3 as default.
+This package is built with Japanese support, using sj3.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -15,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-wnn6/pkg-descr b/japanese/mule-wnn6/pkg-descr
index 67d75645686f..e753b120bdf7 100644
--- a/japanese/mule-wnn6/pkg-descr
+++ b/japanese/mule-wnn6/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Wnn4 or Wnn6. It is
-supported input methods, jeonkak, hangul for Korean(Hanja), and
-quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/japanese/mule-wnn7/pkg-descr b/japanese/mule-wnn7/pkg-descr
index 67d75645686f..e753b120bdf7 100644
--- a/japanese/mule-wnn7/pkg-descr
+++ b/japanese/mule-wnn7/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Japanese support, using Wnn4 or Wnn6. It is
-supported input methods, jeonkak, hangul for Korean(Hanja), and
-quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using Wnn4, too.
+This package is built with Japanese support, using Wnn6.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/korean/mule-freewnn/pkg-descr b/korean/mule-freewnn/pkg-descr
index 476b5568eeb1..a44f757841de 100644
--- a/korean/mule-freewnn/pkg-descr
+++ b/korean/mule-freewnn/pkg-descr
@@ -1,13 +1,13 @@
-This is a package containing only the executables for mule-2.3, a
-multilingual editor based on emacs-19.34.
+This package contains only the executables for mule-2.3, a multilingual
+editor based on emacs-19.34.
 
-You should install a package, mule-common-2.3, containing emacs lisp
+You should install the mule-common-2.3 package containing emacs lisp
 files, info pages, and so on (except executables) for mule-2.3.
 
-This package is built with Korean(Hanja) support, using FreeWnn as
-default. It is supported input methods, jeonkak, hangul for
-Korean(Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
-lib/mule/site-lisp/site-start.el), using FreeWnn, too.
+This package is built with Korean (Hanja) support, using FreeWnn.
+It supports the following input methods: jeonkak, hangul for
+Korean (Hanja), and quanjiao, zhuyin, erpin for Chinese (check out
+${LOCALBASE}/lib/mule/site-lisp/site-start.el).
 
 This package and the package, mule-common-2.3, *will* clobber any
 existing emacs installation.  In particular, the executables and man
@@ -18,7 +18,7 @@ Although this shouldn't cause any problems to run both mule and emacs,
 it may cause some confusion when one of them is pkg_delete'd.  If
 someone has a solution to this, please tell me.
 
-A "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
+A info "dir" file is supplied in the ${PORTSDIR}/editors/mule-common/files/
 subdirectory of the ports package.  Copy it into your /usr/local/info
 to read mule info pages, but also make sure you also add everything
 that may have been added to that file!
diff --git a/textproc/coco/pkg-descr b/textproc/coco/pkg-descr
index 5a3d397da9f1..aaf5adb4637f 100644
--- a/textproc/coco/pkg-descr
+++ b/textproc/coco/pkg-descr
@@ -1,8 +1,8 @@
-This is emacs lisp files, info pages, and so on (except executables)
-for mule-2.3, a multilingual editor based on emacs-19.34.
+This package contains emacs lisp files, info pages, and so on (except
+executables) for mule-2.3, a multilingual editor based on emacs-19.34.
 
-You must install one of packages, mule-2.3, ja-mule-*-2.3 (
-ja-mule-canna-2.3, ja-mule-canna+sj3-2.3, etc.), zh-mule-freewnn-2.3
+You must install one of packages, mule-2.3, ja-mule-*-2.3 
+(ja-mule-canna-2.3, ja-mule-canna+sj3-2.3, etc.), zh-mule-freewnn-2.3
 and ko-mule-freewnn-2.3, each of which contains only the executables
 for mule-2.3.