* Add new command macros: DATE, FMT, MKTEMP, OBJDUMP,

  and use command macro SORT. [1]

* Clean up the comments, and use 4 column tabs everywhere. [2]

* Introduce 2 new variables: SUB_FILES and SUB_LIST. [3]

* Document DEPRECATED and EXPIRATION_DATE variables. [4]

* Sanitize the intermittent output by the build infrastructure
  so that cutting and pasting from it no longer interferes
  with GNATS-tags. [5]

* Honour configure arguments for USE_XLIB if USE/WITH_LIBTOOL_
  is used. [6]

* Properly document 'describe' target. [7]

* Fix pkg-plist handling for ports that set a non-standard
  PREFIX. [8]

* Defaults INDEXFILE to INDEX-6 on 6-CURRENT (600000). [8]

PR:		ports/62298 [1], ports/73633 [2], ports/67151 [3],
		ports/74310 [4]. ports/74758 [5], ports/74536 [6],
		ports/74710 [7], ports/74691 [8]
Submitted by:	eik [1], edwin [2], Florent Thoumie <flz@xbsd.org>,
		sem [4], vs [5], ahze [6], linimon [7], kris [8]

1 files changed, 528 insertions, 411 deletions

diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk
index f4d955b86efb..5ac2b3f6718f 100644
--- a/Mk/bsd.port.mk
+++ b/Mk/bsd.port.mk
@@ -30,8 +30,8 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 # is listed), a port is maintained by the subscribers of the ports@FreeBSD.org
 # mailing list, and any correspondence should be directed there.
 #
-# MAINTAINER	- The e-mail address of the contact person for this port
-#				  (default: ports@FreeBSD.org).
+# MAINTAINER	- The e-mail address of the contact person for this port.
+#				  Default: ports@FreeBSD.org
 #
 # These are meta-variables that are automatically set to the system
 # you are running on.  These are provided in case you need to take
@@ -73,46 +73,50 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  Optional.
 # PKGNAMESUFFIX	- Suffix to specify compilation options.  Optional.
 # UNIQUENAME	- A name for your port that is globally unique.  By default,
-# 				  this is set to ${LATEST_LINK} when LATEST_LINK is set,
-# 				  and to ${PKGNAMEPREFIX}${PORTNAME} otherwise.
-# DISTVERSION	- Vendor version of the distribution (default: ${PORTVERSION})
+#				  this is set to ${LATEST_LINK} when LATEST_LINK is set,
+#				  and to ${PKGNAMEPREFIX}${PORTNAME} otherwise.
+# DISTVERSION	- Vendor version of the distribution.
+#				  Default: ${PORTVERSION}
 # DISTNAME		- Name of port or distribution used in generating
-#				  WRKSRC and DISTFILES below (default:
+#				  WRKSRC and DISTFILES below.
+#				  Default:
 #				  ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX})
 # CATEGORIES	- A list of descriptive categories into which this port falls.
 #				  Mandatory.
 #
 # These variable describe how to fetch files required for building the port.
 #
-# DISTFILES		- Name(s) of archive file(s) containing distribution
-#				  (default: ${DISTNAME}${EXTRACT_SUFX}).  Set this to
-#				  an empty string if the port doesn't require it.
-# EXTRACT_SUFX	- Suffix for archive names (default: .tar.bz2 if USE_BZIP2
-#				  is set, .zip if USE_ZIP is set, .tar.gz otherwise).
+# DISTFILES		- Name(s) of archive file(s) containing distribution.
+#				  Set this to an empty string if the port doesn't require it.
+#				  Default: ${DISTNAME}${EXTRACT_SUFX}
+# EXTRACT_SUFX	- Suffix for archive names
 #				  You never have to set both DISTFILES and EXTRACT_SUFX.
+#				  Default: .tar.bz2 if USE_BZIP2 is set, .zip if USE_ZIP is
+#				  set, .tar.gz otherwise).
 # MASTER_SITES	- Primary location(s) for distribution files if not found
 #				  locally.  See bsd.sites.mk for common choices for
 #				  MASTER_SITES.
-# MASTER_SITE_SUBDIR	- Subdirectory of MASTER_SITES (default: empty).
-#				  Will sometimes need to be set to ${PORTNAME} for (e.g.)
-#				  MASTER_SITE_SOURCEFORGE.  Only guaranteed to work for
-#				  choices of ${MASTER_SITES} defined in bsd.sites.mk.
+# MASTER_SITE_SUBDIR
+#				- Subdirectory of MASTER_SITES. Will sometimes need to be
+#				  set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE.
+#				  Only guaranteed to work for choices of ${MASTER_SITES}
+#				  defined in bsd.sites.mk.
+#				  Default: not set.
 # PATCHFILES	- Name(s) of additional files that contain distribution
-#				  patches (default: none).  make will look for them at
-#				  PATCH_SITES (see below).  They will automatically be
-#				  uncompressed before patching if the names end with
-#				  ".gz", ".bz2" or ".Z".
+#				  patches. Make will look for them at PATCH_SITES (see below).
+#				  They will automatically be uncompressed before patching if
+#				  the names end with ".gz", ".bz2" or ".Z".
+#				  Default: not set.
 # PATCH_SITES	- Primary location(s) for distribution patch files
 #				  if not found locally.
-# DIST_SUBDIR	- Suffix to ${DISTDIR} (default: none).  If set, all
-#				  ${DISTFILES} and ${PATCHFILES} will be put in this
-#				  subdirectory of ${DISTDIR} (see below).  Also they will
-#				  be fetched in this subdirectory from FreeBSD mirror sites.
+# DIST_SUBDIR	- Suffix to ${DISTDIR}.  If set, all ${DISTFILES} and
+#				  ${PATCHFILES} will be put in this subdirectory of
+#				  ${DISTDIR} (see below).  Also they will be fetched in this
+#				  subdirectory from FreeBSD mirror sites.
 # ALLFILES		- All of ${DISTFILES} and ${PATCHFILES}.
-# IGNOREFILES	- If some of the ${ALLFILES} are not checksum-able, set
-#				  this variable to their names (default: empty).
-# EXTRACT_ONLY	- If defined, a subset of ${DISTFILES} you want to
-#			  	  actually extract (default: none).
+# IGNOREFILES	- If set, don't perform checksum checks on these files.
+# EXTRACT_ONLY	- If set, a subset of ${DISTFILES} you want to
+#				  actually extract.
 #
 # (NOTE: by convention, the MAINTAINER entry (see above) should go here.)
 #
@@ -120,17 +124,20 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 # the user's preferred location to fetch files from.  You should
 # rarely need to set these.
 #
-# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
+# MASTER_SITE_BACKUP
+#				- Backup location(s) for distribution files and patch
 #				  files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
-#				  (default:
-#				  ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/)
-# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
+#				  Default:
+#				  ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
+# MASTER_SITE_OVERRIDE
+#				- If set, override the MASTER_SITES setting with this
 #				  value.
-# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
+# MASTER_SITE_FREEBSD
+#				- If set, only use ${MASTER_SITE_BACKUP} for
 #				  MASTER_SITES.
-# CD_MOUNTPTS -			List of CDROM mountpoints to look for distfiles under.
-#						This variable supercedes CD_MOUNTPT, which is
-#						obsolete.
+# CD_MOUNTPTS	- List of CDROM mountpoints to look for distfiles under.
+#				  This variable supercedes CD_MOUNTPT, which is
+#				  obsolete.
 #
 # Set these if your port should not be built under certain circumstances.
 # These are string variables; you should set them to the reason why
@@ -153,70 +160,80 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 # BROKEN		- Port is believed to be broken.  Package builds will
 #				  still be attempted on the bento package cluster to
 #				  test this assumption.
+# DEPRECATED	- Port is deprecated to install. Advisory only.
+# EXPIRATION_DATE
+#				- If DEPRECATED is set, determines a date when
+#				  the port is planed to remove. The date format is
+#				  ISO 8601 (YYYY-MM-DD).
 #
 # In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles
 # or patchfiles have redistribution restrictions, set the following
 # to the list of such files.
 #
-# RESTRICTED_FILES - List of files that cannot be redistributed
-#				  (default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
-#				  or NO_CDROM is set, empty otherwise).
+# RESTRICTED_FILES
+#				- List of files that cannot be redistributed.
+#				  Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
+#				  or NO_CDROM is set, empty otherwise.
 #
 # These variables are booleans, so you don't need to set them to the reason.
 #
-# IS_INTERACTIVE - Set this if your port needs to interact with the user
+# IS_INTERACTIVE
+#				- Set this if your port needs to interact with the user
 #				  during any step in a package build.  User can then decide
 #				  to skip this port by setting ${BATCH}, or compiling only
 #				  the interactive ports by setting ${INTERACTIVE}.
-#				  (Default: not set.)
+#				  Default: not set.
 # USE_SUBMAKE	- Set this if you want that each of the port's main 6 targets
 #				  (extract, patch, configure, build, install and package) to be
 #				  executed in a separate make(1) process. Useful when one of
 #				  the stages needs to influence make(1) variables of the later
 #				  stages using ${WRKDIR}/Makefile.inc generated on the fly.
-#				  (Default: not set.)
+#				  Default: not set.
 #
 # Set these if your port only makes sense to certain architectures.
 # They are lists containing names for them (e.g., "alpha i386").
 # (Defaults: not set.)
 #
-# ONLY_FOR_ARCHS - Only build ports if ${ARCH} matches one of these.
-# NOT_FOR_ARCHS  - Only build ports if ${ARCH} doesn't match one of these.
+# ONLY_FOR_ARCHS
+#				- Only build ports if ${ARCH} matches one of these.
+# NOT_FOR_ARCHS	- Only build ports if ${ARCH} doesn't match one of these.
 #
 # These variables control options about how a port gets built and/or
 # are shorthand notations for common sets of dependencies.
 # Use these if your port uses some of the common software packages. By
 # convention these should be set to 'yes', although they only need to be
-# defined.  (Defaults: not set, unless explicitly indicated below.)
+# defined. Defaults: not set, unless explicitly indicated below.
 #
 # Note: the distinction between the USE_* and WANT_* variables, and the
 # WITH_* and WITHOUT_* variables, are that the former are restricted to
 # usage inside the ports framework, and the latter are reserved for user-
 # settable options.  (Setting USE_* in /etc/make.conf is always wrong).
 #
-# USE_BZIP2		- Says that the port tarballs use bzip2, not gzip, for
+# USE_BZIP2		- If set, this port tarballs use bzip2, not gzip, for
 #				  compression.
-# USE_ZIP		- Says that the port distfile uses zip, not tar w/[bg]zip
+# USE_ZIP		- If set, this port distfile uses zip, not tar w/[bg]zip
 #				  for compression.
-# USE_GCC		- Says that the port requires this version of gcc, either in
+# USE_GCC		- If set, this port requires this version of gcc, either in
 #				  the system or installed from a port.
-# USE_GMAKE		- Says that the port uses gmake.
-# GMAKE			- Set to path of GNU make if not in $PATH (default: gmake).
+# USE_GMAKE		- If set, this port uses gmake.
+# GMAKE			- Set to path of GNU make if not in $PATH.
+#				  Default: gmake
 ##
-# USE_GETOPT_LONG	- Says that the port uses getopt_long. If OSVERSION
+# USE_GETOPT_LONG
+#				- If set, this port uses getopt_long. If OSVERSION
 #				  less than 500041, automatically adds devel/libgnugeopt
 #				  to LIB_DEPENDS, and pass adjusted values of
 #				  CPPFLAGS and LDFLAGS in CONFIGURE_ENV.
-#				  Default: not set.
 ##
-# USE_ICONV		- Says that the port uses libiconv.
-# USE_GETTEXT		- Says that the port uses GNU gettext (libintl).
+# USE_ICONV		- If set, this port uses libiconv.
+# USE_GETTEXT	- If set, this port uses GNU gettext (libintl).
 ##
-# USE_PERL5		- Says that the port uses perl5 in one or more of the extract,
-#                         patch, build, install or run phases.
-# USE_PERL5_BUILD	- Says that the port uses perl5 in one or more of the extract,
-#                         patch, build or install phases.
-# USE_PERL5_RUN		- Says that the port uses perl5 for running.
+# USE_PERL5		- If set, this port uses perl5 in one or more of the extract,
+#				  patch, build, install or run phases.
+# USE_PERL5_BUILD
+#				- If set, this port uses perl5 in one or more of the extract,
+#				  patch, build or install phases.
+# USE_PERL5_RUN	- If set, this port uses perl5 for running.
 # PERL5			- Set to full path of perl5, either in the system or
 #				  installed from a port.
 # PERL			- Set to full path of perl5, either in the system or
@@ -225,151 +242,146 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 # PERL_VERSION	- Full version of perl5 (see below for current value).
 # PERL_VER		- Short version of perl5 (see below for current value).
 # PERL_LEVEL	- Perl version as an integer of the form MNNNPP, where
-#					M is major version, N is minor version, and P is
-#					the patch level. E.g., PERL_VERSION=5.6.1 would give
-#					a PERL_LEVEL of 500601. This can be used in comparisons
-#					to determine if the version of perl is high enough,
-#					whether a particular dependency is needed, etc.
+#				  M is major version, N is minor version, and P is
+#				  the patch level. E.g., PERL_VERSION=5.6.1 would give
+#				  a PERL_LEVEL of 500601. This can be used in comparisons
+#				  to determine if the version of perl is high enough,
+#				  whether a particular dependency is needed, etc.
 # PERL_ARCH		- Directory name of architecture dependent libraries
 #				  (value: ${ARCH}-freebsd).
 # PERL_PORT		- Name of the perl port that is installed
 #				  (value: perl5)
 # SITE_PERL		- Directory name where site specific perl packages go.
-#					This value is added to PLIST_SUB.
-# PERL_MODBUILD		- Use Module::Build to configure, build and install
-#			  port.
-#
-# USE_GHOSTSCRIPT	- Says that the port needs ghostscript to both
-#					build and run.  Default: not set.
-# USE_GHOSTSCRIPT_BUILD	- Says that the port needs ghostscript to build.
-#					Default: not set.
-# USE_GHOSTSCRIPT_RUN	- Says that the port needs ghostscript to run.
-#					Default: not set.
-# GHOSTSCRIPT_PORT	- The port that provides postscript functionality.
-#					Some installations may wish to override the default
-#					to specify a version without X11 and/or localized
-#					versions for their nationality.
-# WITH_GHOSTSCRIPT_AFPL - If set to Yes, says to use the AFPL
-#					version of the ghostscript software instead
-#					of the GNU version, which is used otherwise.
+#				  This value is added to PLIST_SUB.
+# PERL_MODBUILD	- Use Module::Build to configure, build and install port.
+##
+# USE_GHOSTSCRIPT
+#				- If set, this port needs ghostscript to both
+#				  build and run.
+# USE_GHOSTSCRIPT_BUILD
+#				- If set, this port needs ghostscript to build.
+# USE_GHOSTSCRIPT_RUN
+#				- If set, this port needs ghostscript to run.
+# GHOSTSCRIPT_PORT
+#				- The port that provides postscript functionality.
+#				  Some installations may wish to override the default
+#				  to specify a version without X11 and/or localized
+#				  versions for their nationality.
+# WITH_GHOSTSCRIPT_AFPL
+#				- If set, this port uses the AFPL version of the ghostscript
+#				  software instead of the GNU version, which is used otherwise.
 ##
-# USE_BISON		- Says that the port uses bison for building.
+# USE_BISON		- If set, this port uses bison for building.
 ##
-# USE_IMAKE		- Says that the port uses imake.  Implies USE_X_PREFIX.
-# XMKMF			- Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
-# USE_X_PREFIX	- Says that the port installs in ${X11BASE}.  Implies USE_XLIB.
-# USE_XLIB		- Says that the port uses the X libraries.
+# USE_IMAKE		- If set, this port uses imake.  Implies USE_X_PREFIX.
+# XMKMF			- Set to path of `xmkmf' if not in $PATH
+#				  Default: xmkmf -a
+# USE_X_PREFIX	- If set, this port installs in ${X11BASE}.  Implies USE_XLIB.
+# USE_XLIB		- If set, this port uses the X libraries.
 #
-# USE_FREETYPE	- Says that the port uses the freetype print libraries.
-# USE_GL		- Says that the port uses libGL (not needed with XFree86 4.x
+# USE_FREETYPE	- If set, this port uses the freetype print libraries.
+# USE_GL		- If set, this port uses libGL (not needed with XFree86 4.x
 #				  which already includes this functionality).
-# USE_MESA		- Says that the port uses libGL/libglut (deprecated).
-# USE_MOTIF		- Says that the port uses a Motif toolkit.  Implies USE_XPM.
-# NO_OPENMOTIF		- Says that the port uses a custom Motif toolkit
-#			  instead of Openmotif.
-#			  Used only when USE_MOTIF is set.
-# WANT_LESSTIF		- Says that the port uses Lesstif as Motif toolkit.
-#			  Used only when USE_MOTIF is set.  Implies
-#			  NO_OPENMOTIF.
-# USE_SDL		- Says that the port uses the sdl libraries.
-#				See bsd.sdl.mk for more information.
-# USE_XPM		- Says that the port uses the xpm graphics libraries.
+# USE_MESA		- If set, this port uses libGL/libglut (deprecated).
+# USE_MOTIF		- If set, this port uses a Motif toolkit.  Implies USE_XPM.
+# NO_OPENMOTIF	- If set, this port uses a custom Motif toolkit
+#				  instead of Openmotif.
+#				  Used only when USE_MOTIF is set.
+# WANT_LESSTIF	- If set, this port uses Lesstif as Motif toolkit.
+#				  Used only when USE_MOTIF is set.  Implies
+#				  NO_OPENMOTIF.
 ##
-# USE_OPENSSL	- Says that the port relies on the OpenSSL package.
-#				  Default: not set.
+# USE_SDL		- If set, this port uses the sdl libraries.
+#				  See bsd.sdl.mk for more information.
+# USE_XPM		- If set, this port uses the xpm graphics libraries.
 ##
-#
-# USE_OPENLDAP			- Says that the port uses the OpenLDAP libraries
-#						  Implies: WANT_OPENLDAP_VER?=22
-# WANT_OPENLDAP_VER		- Legal values are: 21, 22
-#						  If set to an unkown value, the port is marked BROKEN.
-# WANT_OPENLDAP_SASL	- Says that the system should use OpenLDAP libraries
-#						  with SASL support.
-#
+# USE_OPENSSL	- If set, this port relies on the OpenSSL package.
+##
+# USE_OPENLDAP	- If set, this port uses the OpenLDAP libraries.
+#				  Implies: WANT_OPENLDAP_VER?=22
+# WANT_OPENLDAP_VER
+#				- Legal values are: 21, 22
+#				  If set to an unkown value, the port is marked BROKEN.
+# WANT_OPENLDAP_SASL
+#				- If set, the system should use OpenLDAP libraries
+#				  with SASL support.
 ##
-# USE_AUTOTOOLS	-	Says that the port uses various GNU autotools
-#					(libtool, autoconf, autoheader, automake et al.)
-#					See bsd.autotools.mk for more details.
-#					XXX: not currently in active use - this is a placeholder.
+# USE_AUTOTOOLS	- If set, this port uses various GNU autotools
+#				  (libtool, autoconf, autoheader, automake et al.)
+#				  See bsd.autotools.mk for more details.
+#				  XXX: not currently in active use - this is a placeholder.
 ##
-# USE_JAVA		- Says that the port relies on the Java language.
+# USE_JAVA		- If set, this port relies on the Java language.
 #				  Implies inclusion of bsd.java.mk.  (Also see
 #				  that file for more information on USE_JAVA_*).
-#				  Default: not set.
-# USE_PYTHON	- Says that the port relies on the Python language.
+# USE_PYTHON	- If set, this port relies on the Python language.
 #				  Implies inclusion of bsd.python.mk. (Also see
 #				  that file for more information on USE_PYTHON_*
 #				  and USE_PYDISTUTILS).
-#				  Default: not set.
-# USE_RUBY		- Says that the port relies on the Ruby language.
+# USE_RUBY		- If set, this port relies on the Ruby language.
 #				  Implies inclusion of bsd.ruby.mk.  (Also see
 #				  that file for more information on USE_RUBY_*).
-#				  Default: not set.
-# USE_GNUSTEP		- Says that the port relies on the GNUstep system.
-#			  Implies the inclusion of bsd.gnustep.mk.
-#			  (Also see that file for more information on
-#			  USE_GNUSTEP_*).
-#			  Default: not set.
+# USE_GNUSTEP	- If set, this port relies on the GNUstep system.
+#				  Implies the inclusion of bsd.gnustep.mk.
+#				  (Also see that file for more information on
+#				  USE_GNUSTEP_*).
 ##
 # USE_GNOME		- A list of the Gnome dependencies the port has (e.g.,
 #				  glib12, gtk12).  Implies that the port needs Gnome.
 #				  Implies inclusion of bsd.gnome.mk.  See bsd.gnome.mk
 #				  or http://www.FreeBSD.org/gnome/docs/porting.html
 #				  for more details.
-#				  Default: not set.
-#
-# USE_KDEBASE_VER	- Set to 3 to use the KDE windowing system.
-#					  Implies inclusion
-#					  of bsd.kde.mk.  Default: not set.
-# USE_KDELIBS_VER	- Set to 3 to use the KDE libraries.
-#					  Implies inclusion
-#					  of bsd.kde.mk.  Default: not set.
-# USE_QT_VER		- Set to 3 to use the QT libraries.
-#					  Implies inclusion of bsd.kde.mk.  Default: not set.
-#
-# USE_LINUX			- Set to yes to say the port needs emulators/linux_base.
-#					  Default: not set.
-# USE_LINUX_PREFIX	- controls the action of PREFIX (see above).
-#
-#
-# USE_MYSQL			- Add MySQL client dependency.
-#					  If no version is given (by the maintainer via the port or
-#					  by the user via defined variable), try to find the
-#					  currently installed version.  Fall back to default if
-#					  necessary (MySQL4.0 = 40).
-#
-# DEFAULT_MYSQL_VER	- MySQL default version. Can be overriden within a port.
-#					  Default: 40.
-#
-# WANT_MYSQL_VER 	- Maintainer can set an arbitrary version of MySQL by
-#					  using it.
-#
-# BROKEN_WITH_MYSQL	- This variable can be defined if the ports doesn't support
-#					  one or more version of MySQL.
-#
-# MYSQL_VER			- Internal variable for MySQL version.
-#
-# WITH_MYSQL_VER	- User defined variable to set MySQL version.
-#
-# USE_RC_SUBR		- Says the ports startup/shutdown script uses the common
-#			  	routines found in etc/rc.subr and may need to
-#				depend on the sysutils/rc_subr port.
-#
-# RC_SUBR		- Set to path of rc.subr, defaults to ${LOCALBASE}/etc/rc.subr.
-#
-# USE_APACHE		- Says that the port relies on an apache webserver.
-# APACHE_PORT		- CATEGORY and portname of the prefered port for apache.
-#					Default: www/apache13
-#					If WITH_APACHE2 is defined defaults to www/apache2
+##
+# USE_KDEBASE_VER
+#				- Set to 3 to use the KDE windowing system.
+#				  Implies inclusion of bsd.kde.mk.
+# USE_KDELIBS_VER
+#				- Set to 3 to use the KDE libraries.
+#				  Implies inclusion of bsd.kde.mk.
+# USE_QT_VER	- Set to 3 to use the QT libraries.
+#				  Implies inclusion of bsd.kde.mk.
+##
+# USE_LINUX		- Set to yes to say the port needs emulators/linux_base.
+# USE_LINUX_PREFIX
+#				- controls the action of PREFIX (see above).
+##
+# USE_MYSQL		- Add MySQL client dependency.
+#				  If no version is given (by the maintainer via the port or
+#				  by the user via defined variable), try to find the
+#				  currently installed version.  Fall back to default if
+#				  necessary (MySQL4.0 = 40).
+# DEFAULT_MYSQL_VER
+#				- MySQL default version. Can be overriden within a port.
+#				  Default: 40.
+# WANT_MYSQL_VER
+#				- Maintainer can set an arbitrary version of MySQL by using it.
+# BROKEN_WITH_MYSQL
+#				- This variable can be defined if the ports doesn't support
+#				  one or more version of MySQL.
+# MYSQL_VER		- Internal variable for MySQL version.
+# WITH_MYSQL_VER
+#				- User defined variable to set MySQL version.
+##
+# USE_RC_SUBR	- If set, the ports startup/shutdown script uses the common
+#				  routines found in etc/rc.subr and may need to
+#				  depend on the sysutils/rc_subr port.
+# RC_SUBR		- Set to path of rc.subr.
+#				  Default: ${LOCALBASE}/etc/rc.subr.
+##
+# USE_APACHE	- If set, this port relies on an apache webserver.
+# APACHE_PORT	- CATEGORY and portname of the prefered port for apache.
+#				  Default: www/apache13
+#				  If WITH_APACHE2 is defined defaults to www/apache2
 # APXS			- Full path to the prefered apxs binary to configure
-#			  apache modules. Default: ${LOCALBASE}/sbin/apxs
-#				
+#				  apache modules.
+#				  Default: ${LOCALBASE}/sbin/apxs
 #
 #
 # Dependency checking.  Use these if your port requires another port
 # not in the list above.  (Default: empty.)
 #
-# EXTRACT_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# EXTRACT_DEPENDS
+#				- A list of "path:dir[:target]" tuples of other ports this
 #				  package depends on in the "extract" stage.  "path" is
 #				  the name of a file if it starts with a slash (/), an
 #				  executable otherwise.  make will test for the existence
@@ -378,7 +390,7 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  a "make all install" if it's not found.  If the third
 #				  field ("target") exists, it will be used instead of
 #				  ${DEPENDS_TARGET}.
-# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# PATCH_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
 #				  package depends on in the "patch" stage.  "path" is the
 #				  name of a file if it starts with a slash (/), an
 #				  executable otherwise.  make will test for the existence
@@ -387,7 +399,7 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  a "make all install" if it's not found.  If the third
 #				  field ("target") exists, it will be used instead of
 #				  ${DEPENDS_TARGET}.
-# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# FETCH_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
 #				  package depends in the "fetch" stage.  "path" is the
 #				  name of a file if it starts with a slash (/), an
 #				  executable otherwise.  make will test for the
@@ -396,7 +408,7 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  into "dir" to do a "make all install" if it's not
 #				  found.  If the third field ("target") exists, it will
 #				  be used instead of ${DEPENDS_TARGET}.
-# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
+# BUILD_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
 #				  package depends to build (between the "extract" and
 #				  "build" stages, inclusive).  The test done to
 #				  determine the existence of the dependency is the
@@ -419,69 +431,80 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  things that don't fall into the above four categories.
 #				  If the second field ("target") exists, it will be used
 #				  instead of ${DEPENDS_TARGET}.
-# DEPENDS_TARGET - The default target to execute when a port is calling a
-#				  dependency (default: "install").
+# DEPENDS_TARGET
+#				- The default target to execute when a port is calling a
+#				  dependency.
+#				  Default: install
 #
 # Conflict checking.  Use if your port cannot be installed at the same time as
 # another package.
 #
-# CONFLICTS      - A list of package name patterns that the port conflicts with.
-#                  It's possible to use any shell meta-characters for pattern
-#                  matching.
-#                  E.g. apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
-#
+# CONFLICTS		- A list of package name patterns that the port conflicts with.
+#				  It's possible to use any shell meta-characters for pattern
+#				  matching.
+#				  E.g. apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
 #
 # Various directory definitions and variables to control them.
 # You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
 #
-# X11BASE		- Where X11 ports install things (default: /usr/X11R6).
-# LOCALBASE		- Where non-X11 ports install things (default: /usr/local).
-# LINUXBASE		- Where Linux ports install things (default: /compat/linux).
-# PREFIX		- Where *this* port installs its files (default: ${X11BASE}
-#				  if USE_X_PREFIX is set, ${LINUXBASE} if USE_LINUX_PREFIX
-#				  is set, otherwise ${LOCALBASE}).
+# X11BASE		- Where X11 ports install things.
+#				  Default: /usr/X11R6
+# LOCALBASE		- Where non-X11 ports install things.
+#				  Default: /usr/local
+# LINUXBASE		- Where Linux ports install things.
+#				  Default: /compat/linux
+# PREFIX		- Where *this* port installs its files.
+#				  Default: ${X11BASE} if USE_X_PREFIX is set, ${LINUXBASE} if
+#				  USE_LINUX_PREFIX is set, otherwise ${LOCALBASE}
 # MASTERDIR		- Where the port finds patches, package files, etc.  Define
 #				  this is you have two or more ports that share most of the
-#				  files (default: ${.CURDIR}).
-# PORTSDIR		- The root of the ports tree. (default: /usr/ports)
-# DISTDIR 		- Where to search for and store copies of original sources
-#				  (default: ${PORTSDIR}/distfiles).
+#				  files.
+#				  Default: ${.CURDIR}
+# PORTSDIR		- The root of the ports tree.
+#				  Default: /usr/ports
+# DISTDIR		- Where to search for and store copies of original sources
+#				  Default: ${PORTSDIR}/distfiles
 # PACKAGES		- A top level directory where all packages go (rather than
-#				  going locally to each port). (default: ${PORTSDIR}/packages).
+#				  going locally to each port).
+#				  Default: ${PORTSDIR}/packages
 # WRKDIRPREFIX	- The place to root the temporary working directory
-#				  hierarchy (default: none).
-# WRKDIR 		- A temporary working directory that gets *clobbered* on clean
-#				  (default: ${WRKDIRPREFIX}${.CURDIR}/work).
+#				  hierarchy.
+#				  Default: none
+# WRKDIR		- A temporary working directory that gets *clobbered* on clean
+#				  Default: ${WRKDIRPREFIX}${.CURDIR}/work
 # WRKSRC		- A subdirectory of ${WRKDIR} where the distribution actually
-#				  unpacks to.  (Default: ${WRKDIR}/${DISTNAME} unless
-#				  NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
+#				  unpacks to.
+#				  Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set,
+#				  in which case simply ${WRKDIR}
 # NO_WRKSUBDIR	- Assume port unpacks directly into ${WRKDIR}.
-# PATCHDIR 		- A directory containing any additional patches you made
-#				  to port this software to FreeBSD (default:
-#				  ${MASTERDIR}/files)
-# SCRIPTDIR 	- A directory containing any auxiliary scripts
-#				  (default: ${MASTERDIR}/scripts)
-# FILESDIR 		- A directory containing any miscellaneous additional files.
-#				  (default: ${MASTERDIR}/files)
-# PKGDIR 		- A directory containing any package creation files.
-#				  (default: ${MASTERDIR})
+# PATCHDIR		- A directory containing any additional patches you made
+#				  to port this software to FreeBSD.
+#				  Default: ${MASTERDIR}/files
+# SCRIPTDIR		- A directory containing any auxiliary scripts
+#				  Default: ${MASTERDIR}/scripts
+# FILESDIR		- A directory containing any miscellaneous additional files.
+#				  Default: ${MASTERDIR}/files
+# PKGDIR		- A directory containing any package creation files.
+#				  Default: ${MASTERDIR}
 #
 # Variables that serve as convenient "aliases" for your *-install targets.
 # Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
 #
-# INSTALL_PROGRAM - A command to install binary executables.  (By
-#					default, also strips them, unless ${STRIP} is
-#					overridden to be the empty string).
-# INSTALL_SCRIPT  - A command to install executable scripts.
-# INSTALL_DATA	  - A command to install sharable data.
-# INSTALL_MAN	  - A command to install manpages.  May or not compress,
-#					depending on the value of MANCOMPRESSED (see below).
+# INSTALL_PROGRAM
+#				- A command to install binary executables.  (By
+#				  default, also strips them, unless ${STRIP} is
+#				  overridden to be the empty string).
+# INSTALL_SCRIPT
+#				- A command to install executable scripts.
+# INSTALL_DATA	- A command to install sharable data.
+# INSTALL_MAN	- A command to install manpages.  May or not compress,
+#				  depending on the value of MANCOMPRESSED (see below).
 #
 # Boolean to control whether manpages are installed.
 #
-# NO_INSTALL_MANPAGES - Says that the port doesn't want to install any
-#						manpages (default: not set, i.e. manpages
-#						are installed by default).
+# NO_INSTALL_MANPAGES
+#				- If set, this port doesn't want to install any manpages.
+#				  Default: not set, i.e. manpages are installed by default).
 #
 # Set the following to specify all manpages that your port installs.
 # These manpages will be automatically listed in ${PLIST}.  Depending
@@ -498,58 +521,68 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  appropriate directories.  (Use this even if the port
 #				  installs its own manpage links so they will show up
 #				  correctly in ${PLIST}.)
-# MANPREFIX		- The directory prefix for ${MAN<sect>} and ${MLINKS}
-#				  (default: ${PREFIX}).
-# MAN<sect>PREFIX - If manual pages of some sections install in different
-#				  locations than others, use these (default: ${MANPREFIX}).
-# MANCOMPRESSED - This variable can take values "yes", "no" or
+# MANPREFIX		- The directory prefix for ${MAN<sect>} and ${MLINKS}.
+#				  Default: ${PREFIX}
+# MAN<sect>PREFIX
+#				- If manual pages of some sections install in different
+#				  locations than others, use these.
+#				  Default: ${MANPREFIX}
+# MANCOMPRESSED	- This variable can take values "yes", "no" or
 #				  "maybe".  "yes" means manpages are installed
 #				  compressed; "no" means they are not; "maybe" means
-#				  it changes depending on the value of
-#				  NOMANCOMPRESS.  The default is "yes" if USE_IMAKE
-#				  is set and NO_INSTALL_MANPAGES is not set, and
-#				  "no" otherwise.
+#				  it changes depending on the value of NOMANCOMPRESS.
+#				  Default: "yes" if USE_IMAKE is set and NO_INSTALL_MANPAGES
+#				  is not set, and "no" otherwise.
 #
 # Set the following to specify all .info files your port installs.
 #
 # INFO			- A list of .info files (omitting the trailing ".info");
 #				  only one entry per document!
 # INFO_PATH		- Path, where all .info files will be installed by your
-#			  port, relative to ${PREFIX} (default: "share/info" if
-#			  ${PREFIX} is equal to /usr and "info" otherwise).
+#				  port, relative to ${PREFIX}
+#				  Default: "share/info" if ${PREFIX} is equal to /usr
+#				  and "info" otherwise).
 #
 # Set the following to specify all documentation your port installs into
 # ${DOCSDIR}
 #
 # PORTDOCS		- A list of files and directories relative to DOCSDIR.
-# 				  Shell glob patterns can be used, directories include
-# 				  the entire subtree of contained files and directories.
-# 				  Should not be set when no documentation files are
-# 				  installed (for example because NOPORTDOCS is defined).
-# 				  Useful for dynamically generated documentation.
+#				  Shell glob patterns can be used, directories include
+#				  the entire subtree of contained files and directories.
+#				  Should not be set when no documentation files are
+#				  installed (for example because NOPORTDOCS is defined).
+#				  Useful for dynamically generated documentation.
 #
 # Default targets and their behaviors:
 #
 # fetch			- Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
 #				  into ${DISTDIR} as necessary.
 # fetch-list	- Show list of files that would be retrieved by fetch.
-# fetch-recursive - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined),
+# fetch-recursive
+#				- Retrieves ${DISTFILES} (and ${PATCHFILES} if defined),
 #				  for port and dependencies into ${DISTDIR} as necessary.
-# fetch-recursive-list  - Show list of files that would be retrieved by
+# fetch-recursive-list
+#				- Show list of files that would be retrieved by
 #				  fetch-recursive.
-# fetch-required-list - Show list of files that would be retrieved by
+# fetch-required-list
+#				- Show list of files that would be retrieved by
 #				  fetch-required.
-# fetch-required - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined),
+# fetch-required
+#				- Retrieves ${DISTFILES} (and ${PATCHFILES} if defined),
 #				  for port and dependencies that are not already installed
 #				  into ${DISTDIR}.
-# all-depends-list - Show all directories which are dependencies
-#				for this port.
-# build-depends-list - Show all directories which are build-dependencies
-#				for this port.
-# package-depends-list - Show all directories which are
-#				package-dependencies for this port.
-# run-depends-list - Show all directories which are run-dependencies
-#				for this port.
+# all-depends-list
+#				- Show all directories which are dependencies
+#				  for this port.
+# build-depends-list
+#				- Show all directories which are build-dependencies
+#				  for this port.
+# package-depends-list
+#				- Show all directories which are
+#				  package-dependencies for this port.
+# run-depends-list
+#				- Show all directories which are run-dependencies
+#				  for this port.
 #
 # extract		- Unpacks ${DISTFILES} into ${WRKDIR}.
 # patch			- Apply any provided patches to the source.
@@ -562,22 +595,24 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 # deinstall		- Remove the installation.
 # deinstall-all	- Remove all installations with the same PKGORIGIN.
 # package		- Create a package from an _installed_ port.
-# package-recursive - Create a package for a port and _all_ of its dependancies.
+# package-recursive
+#				- Create a package for a port and _all_ of its dependancies.
 # describe		- Try to generate a one-line description for each port for
 #				  use in INDEX files and the like.
 # checkpatch	- Do a "patch -C" instead of a "patch".  Note that it may
 #				  give incorrect results if multiple patches deal with
 #				  the same file.
 # checksum		- Use distinfo to ensure that your distfiles are valid.
-# checksum-recursive - Run checksum in this port and all dependencies.
+# checksum-recursive
+#				- Run checksum in this port and all dependencies.
 # makesum		- Generate distinfo (only do this for your own ports!).
-# clean		    - Remove ${WRKDIR} and other temporary files used for building.
+# clean			- Remove ${WRKDIR} and other temporary files used for building.
 # clean-depends	- Do a "make clean" for all dependencies.
-# config	- Configure options for this port (using ${DIALOG}).
-#			Automatically run prior to extract, patch, configure, build,
-#			install, and package.
+# config		- Configure options for this port (using ${DIALOG}).
+#				  Automatically run prior to extract, patch, configure, build,
+#				  install, and package.
 # showconfig	- Display options config for this port
-# rmconfig	- Remove the options config for this port
+# rmconfig		- Remove the options config for this port
 #
 # Default sequence for "all" is:
 #
@@ -603,144 +638,178 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 # Here are some variables used in various stages.
 #
 # For options:
-#	OPTIONS		- List of what WITH_<option> options this port accept.  The
-#			  format is <option> "<description>" [on|off]
-#			  Example:
-#				FLEXRESP "Flexible response to events" off
-#			 which tell that an option WITH_FLEXRESP exists for this port,
-#			 that by default it is not defined, and that the description to
-#			 show to a user in the config dialog is "Flexible response to
-#			 events".  If you have more than one option, just chain them
-#			 into a single variable.  NOTE: To make options work, you need
-#			 to include bsd.port.pre.mk before you start testing the
-#			 WITH_xyz variables.
+# OPTIONS		- List of what WITH_<option> options this port accept.  The
+#				  format is <option> "<description>" [on|off]
+#				  Example:
+#					FLEXRESP "Flexible response to events" off
+#				  which tell that an option WITH_FLEXRESP exists for this port,
+#				  that by default it is not defined, and that the description to
+#				  show to a user in the config dialog is "Flexible response to
+#				  events".  If you have more than one option, just chain them
+#				  into a single variable.  NOTE: To make options work, you need
+#				  to include bsd.port.pre.mk before you start testing the
+#				  WITH_xyz variables.
 #
 # For fetch:
 #
-# FETCH_CMD		- Full path to ftp/http fetch command if not in $PATH
-#				  (default: "/usr/bin/fetch -ARr").
-# FETCH_BEFORE_ARGS -
-#				  Arguments to ${FETCH_CMD} before filename (default: none).
-# FETCH_AFTER_ARGS -
-#				  Arguments to ${FETCH_CMD} following filename (default: none).
-# FETCH_ENV		- Environment to pass to ${FETCH_CMD} (default: none).
-# FETCH_REGET	- Times to retry fetching of files on checksum errors (default: 1).
+# FETCH_CMD		- Full path to ftp/http fetch command if not in $PATH.
+#				  Default: "/usr/bin/fetch -ARr"
+# FETCH_BEFORE_ARGS
+#				- Arguments to ${FETCH_CMD} before filename.
+#				  Default: none
+# FETCH_AFTER_ARGS
+#				- Arguments to ${FETCH_CMD} following filename.
+#				  Default: none
+# FETCH_ENV		- Environment to pass to ${FETCH_CMD}.
+#				  Default: none
+# FETCH_REGET	- Times to retry fetching of files on checksum errors.
+#				  Default: 1
 #
 # For extract:
 #
-# EXTRACT_CMD	- Command for extracting archive (default: "bzip2" if
-#				  USE_BZIP2 is set, "unzip" if USE_ZIP is set, "gzip"
-#				  otherwise).
-# EXTRACT_BEFORE_ARGS -
-#				  Arguments to ${EXTRACT_CMD} before filename
-#				  (default: "-dc").
-# EXTRACT_AFTER_ARGS -
-#				  Arguments to ${EXTRACT_CMD} following filename
-#				  (default: "| tar -xf -").
-# EXTRACT_PRESERVE_OWNERSHIP -
-#				  Normally, when run as "root", the extract stage will
+# EXTRACT_CMD	- Command for extracting archive: "bzip2" if USE_BZIP2
+#				  is set, "unzip" if USE_ZIP is set, "gzip" otherwise.
+# EXTRACT_BEFORE_ARGS
+#				- Arguments to ${EXTRACT_CMD} before filename.
+#				  Default: "-dc"
+# EXTRACT_AFTER_ARGS
+#				- Arguments to ${EXTRACT_CMD} following filename.
+#				  default: "| tar -xf -"
+# EXTRACT_PRESERVE_OWNERSHIP
+#				- Normally, when run as "root", the extract stage will
 #				  change the owner and group of all files under ${WRKDIR}
 #				  to 0:0.  Set this variable if you want to turn off this
 #				  feature.
 #
 # For makesum:
 #
-# NO_SIZE			- Don't record size data in distinfo, needed 
+# NO_SIZE		- Don't record size data in distinfo, needed
 #				  when the master site does not report file
 #				  sizes, or when multiple valid versions of
 #				  a distfile, having different sizes, exist.
 #
 # For patch:
 #
-# EXTRA_PATCHES - Define this variable if you have patches not in
+# EXTRA_PATCHES	- Define this variable if you have patches not in
 #				  ${PATCHDIR}.  This usually happens when you need to
 #				  do some pre-processing before some distribution
 #				  patches can be applied.  In that case, fetch them as
 #				  extra distfiles, put the processed results in
 #				  ${WRKDIR}, then point EXTRA_PATCHES to them.
-#
 #				  The patches specified by this variable will be
 #				  applied after the normal distribution patches but
 #				  before those in ${PATCHDIR}.
-# PATCH_WRKSRC  - Directory to apply patches in (default: ${WRKSRC}).
+# PATCH_WRKSRC	- Directory to apply patches in.
+#				  Default: ${WRKSRC}
 #
 # For configure:
 #
-# HAS_CONFIGURE	- Says that the port has its own configure script.  The
+# HAS_CONFIGURE	- If set, this port has its own configure script.  The
 #				  configure stage will not do anything if this is not set.
-# GNU_CONFIGURE	- Set if you are using GNU configure (optional).  Implies
+# GNU_CONFIGURE	- If set, you are using GNU configure (optional).  Implies
 #				  HAS_CONFIGURE.
-# PERL_CONFIGURE - Configure using Perl's MakeMaker.  Implies USE_PERL5.
-# CONFIGURE_WRKSRC - Directory to run configure in (default: ${WRKSRC}).
-# CONFIGURE_SCRIPT - Name of configure script, relative to ${CONFIGURE_WRKSRC}
-#				  (default: "Makefile.PL" if PERL_CONFIGURE is set,
-#				  "configure" otherwise).
-# CONFIGURE_TARGET - The name of target to call when GNU_CONFIGURE is
-#				  defined (default: ${MACHINE_ARCH}-portbld-freebsd${OSREL}).
-# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set
-#				  (default: "--prefix=${PREFIX} ${CONFIGURE_TARGET}" if
+# PERL_CONFIGURE
+#				- Configure using Perl's MakeMaker.  Implies USE_PERL5.
+# CONFIGURE_WRKSRC
+#				- Directory to run configure in.
+#				  Default: ${WRKSRC}
+# CONFIGURE_SCRIPT
+#				- Name of configure script, relative to ${CONFIGURE_WRKSRC}.
+#				  Default: "Makefile.PL" if PERL_CONFIGURE is set,
+#				  "configure" otherwise.
+# CONFIGURE_TARGET
+#				- The name of target to call when GNU_CONFIGURE is
+#				  defined.
+#				  Default: ${MACHINE_ARCH}-portbld-freebsd${OSREL}
+# CONFIGURE_ARGS
+#				- Pass these args to configure if ${HAS_CONFIGURE} is set.
+#				  Default: "--prefix=${PREFIX} ${CONFIGURE_TARGET}" if
 #				  GNU_CONFIGURE is set, "CC=${CC} CCFLAGS=${CFLAGS}
 #				  PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib
 #				  INSTALLARCHLIB=${PREFIX}/lib" if PERL_CONFIGURE is set,
-#				  empty otherwise).
-# CONFIGURE_ENV - Pass these env (shell-like) to configure if
+#				  empty otherwise.
+# CONFIGURE_ENV	- Pass these env (shell-like) to configure if
 #				  ${HAS_CONFIGURE} is set.
-# CONFIGURE_LOG - The name of configure log file (default: config.log).
-#				  It will be printed to the screen if configure fails.
-# CONFIGURE_FAIL_MESSAGE - A message displayed to users when configure
-# 				           fails (note: this assumes the do-configure
-# 				           target has not been overwritten).  This message
-# 				           will be passed through /usr/bin/fmt before
-# 				           being shown to the user.
+# CONFIGURE_LOG	- The name of configure log file. It will be printed to
+#				  the screen if configure fails.
+#				  Default: config.log
+# CONFIGURE_FAIL_MESSAGE
+#				- A message displayed to users when configure
+#				  fails (note: this assumes the do-configure
+#				  target has not been overwritten).  This message
+#				  will be passed through /usr/bin/fmt before
+#				  being shown to the user.
 #
 # For build and install:
 #
-# MAKEFILE		- Name of the makefile (default: Makefile).
-# ALL_TARGET	- Default target for sub-make in build stage (default: all).
-# BUILD_WRKSRC  - Directory to do build in (default: ${WRKSRC}).
+# MAKEFILE		- Name of the makefile.
+#				  Default: Makefile
+# ALL_TARGET	- Default target for sub-make in build stage.
+#				  Default: all
+# BUILD_WRKSRC	- Directory to do build in (default: ${WRKSRC}).
 # MAKE_ENV		- Additional environment vars passed to sub-make in build
-#				  and install stages (default: see below).
-# MAKE_ARGS		- Any extra arguments to sub-make in build and install
-#				  stages (default: none).
+#				  and install stages.
+#				  Default: see below
+# MAKE_ARGS		- Any extra arguments to sub-make in build and install stages.
+#				  Default: none
 #
 # For install:
 #
-# INSTALL_TARGET - Default target for sub-make in install stage
-# 				  (default: install).
-# INSTALL_WRKSRC - Directory to install from (default: ${WRKSRC}).
+# INSTALL_TARGET
+#				- Default target for sub-make in install stage.
+#				  Default: install
+# INSTALL_WRKSRC
+#				- Directory to install from
+#				  Default: ${WRKSRC}
 # NO_MTREE		- If set, will not invoke mtree from bsd.port.mk from
 #				  the "install" target.
-# MTREE_FILE	- The name of the mtree file (default: /etc/mtree/BSD.x11.dist
-#				  if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
-#				  otherwise.)
-# PLIST_DIRS		- Directories to be added to packing list
-# PLIST_FILES		- Files and symbolic links to be added to packing list
+# MTREE_FILE	- The name of the mtree file.
+#				  Default: /etc/mtree/BSD.x11.dist if USE_X_PREFIX is set,
+#				  /etc/mtree/BSD.local.dist otherwise.
+# PLIST_DIRS	- Directories to be added to packing list
+# PLIST_FILES	- Files and symbolic links to be added to packing list
 #
-# PLIST			- Name of the `packing list' file (default: ${PKGDIR}/pkg-plist).
+# PLIST			- Name of the `packing list' file.
 #				  Change this to ${WRKDIR}/PLIST or something if you
 #				  need to write to it.  (It is not a good idea for a port
 #				  to write to any file outside ${WRKDIR} during a normal
 #				  build.)
+#				  Default: ${PKGDIR}/pkg-plist
 # TMPPLIST		- Name of the `packing list' file after processing
-#				  (default: ${WRKDIR}/.PLIST.mktmp).
+#				  Default: ${WRKDIR}/.PLIST.mktmp
 # PLIST_SUB		- List of "variable=value" pair for substitution in ${PLIST}
-# 				  (default: see below).
-# INSTALLS_SHLIB - If set, bsd.port.mk will automatically run ldconfig commands
+#				  Default: see below
+#
+# SUB_FILES		- Files that should be passed through sed and redirected to
+#				  ${WRKDIR}.
+#				- For each file specified in SUB_FILES, there must be a
+#				  corresponding file in ${FILESDIR} whose suffix is ".in". For
+#				  instance, if the Makefile specifies "SUB_FILES= pkg-message"
+#				  then there must be a file called pkg-message.in in
+#				  ${FILESDIR}.
+#				- The substitution process is the same as PLIST_FILES, as
+#				  described below except that any line beginning with @comment
+#				  is deleted.
+# SUB_LIST		- List of "variable=value" pair for substitution in ${SUB_FILES}
+#				  Some pairs are added by default: eg. PREFIX=${PREFIX})
+#
+# INSTALLS_SHLIB
+#				- If set, bsd.port.mk will automatically run ldconfig commands
 #				  from post-install and also add appropriate @exec/@unexec
 #				  directives to directories listed in LDCONFIG_DIRS.
-# LDCONFIG_DIRS - List of directories to run ldconfig if
-#				  INSTALLS_SHLIB is set (default: %%PREFIX%%/lib).
+# LDCONFIG_DIRS	- List of directories to run ldconfig if INSTALLS_SHLIB is set.
 #				  Note that this is passed through sed just like the
 #				  rest of PLIST, so ${PLIST_SUB} substitutions also
 #				  apply here.  It is recommended that you use
 #				  %%PREFIX%% for ${PREFIX}, %%LOCALBASE%% for
 #				  ${LOCALBASE} and %%X11BASE%% for ${X11BASE}.
-# DOCSDIR		- Name of the directory to install the packages docs in
-#				  (default: ${PREFIX}/share/doc/${PORTNAME}).
-# EXAMPLESDIR		- Name of the directory to install the packages examples in
-#				  (default: ${PREFIX}/share/examples/${PORTNAME}).
-# DATADIR		- Name of the directory to install the packages shared data
-#				  in (default: ${PREFIX}/share/${PORTNAME}).
+#				  Default: %%PREFIX%%/lib
+# DOCSDIR		- Name of the directory to install the packages docs in.
+#				  Default: ${PREFIX}/share/doc/${PORTNAME}
+# EXAMPLESDIR	- Name of the directory to install the packages examples in.
+#				  Default: ${PREFIX}/share/examples/${PORTNAME}
+# DATADIR		- Name of the directory to install the packages shared data in.
+#				  Default: ${PREFIX}/share/${PORTNAME}
 #
 # Note that the install target will automatically add manpages (see
 # above) and also substitute special sequences of characters (delimited
@@ -753,43 +822,51 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #
 # For package:
 #
-# NO_LATEST_LINK - Do not install the "Latest" link for package.  Define this
+# NO_LATEST_LINK
+#				- Do not install the "Latest" link for package.  Define this
 #				  if this port is a beta version of another stable port
 #				  which is also in the tree.
-# LATEST_LINK    - Install the "Latest" link for the package as ___.  Define
-#                 this if the "Latest" link name will be incorrectly determined.
+# LATEST_LINK	- Install the "Latest" link for the package as ___.  Define
+#				  this if the "Latest" link name will be incorrectly determined.
 #
 # This is used in all stages:
 #
 # SCRIPTS_ENV	- Additional environment vars passed to scripts in
-#                 ${SCRIPTDIR} executed by bsd.port.mk (default: see below).
+#				  ${SCRIPTDIR} executed by bsd.port.mk.
+#				  Default: see below
 #
 # Finally, variables to change if you want a special behavior.  These
 # are for debugging purposes.  Don't set them in your Makefile.
 #
 # ECHO_MSG		- Used to print all the '===>' style prompts - override this
-#				  to turn them off (default: ${ECHO_CMD}).
+#				  to turn them off.
+#				  Default: ${ECHO_CMD}
 # PATCH_DEBUG	- If set, print out more information about the patches as
 #				  it attempts to apply them.
 # PKG_DBDIR		- Where package installation is recorded; this directory
-#				must not contain anything else (default: /var/db/pkg).
-# PORT_DBDIR		- Where port configuration options are recorded
-#				(default: /var/db/ports)
-# NO_PKG_REGISTER - Don't register a port installation as a package.
-# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
+#				  must not contain anything else.
+#				  Default: /var/db/pkg
+# PORT_DBDIR	- Where port configuration options are recorded.
+#				  Default: /var/db/ports
+# NO_PKG_REGISTER
+#				- Don't register a port installation as a package.
+# FORCE_PKG_REGISTER
+#				- If set, it will overwrite any existing package
 #				  registration information in ${PKG_DBDIR}/${PKGNAME}.
 # NO_DEPENDS	- Don't verify build of dependencies.
 # NO_CHECKSUM	- Don't verify the checksum.  Typically used when
 #				  when you noticed the distfile you just fetched has
 #				  a different checksum and you intend to verify if
 #				  the port still works with it.
-# USE_PACKAGE_DEPENDS - Install dependencies from existing packages instead
+# USE_PACKAGE_DEPENDS
+#				- Install dependencies from existing packages instead
 #				  of building the port from scratch.
-# INSTALL_AS_USER - Define this to install as the current user, intended
-#			      for systems where you have no root access.
-# DISABLE_SIZE	  - Do not check the size of a distfile even if the SIZE field
-#			      has been specified in distinfo.  This is useful
-#			      when using an alternate FETCH_CMD.
+# INSTALL_AS_USER
+#				- Define this to install as the current user, intended
+#				  for systems where you have no root access.
+# DISABLE_SIZE	- Do not check the size of a distfile even if the SIZE field
+#				  has been specified in distinfo.  This is useful
+#				  when using an alternate FETCH_CMD.
 #
 # End of the list of all variables that need to be defined in a port.
 # Most port authors should not need to understand anything after this point.
@@ -831,6 +908,7 @@ COMM?=		/usr/bin/comm
 CP?=		/bin/cp
 CPIO?=		/usr/bin/cpio
 CUT?=		/usr/bin/cut
+DATE?=		/bin/date
 DC?=		/usr/bin/dc
 DIALOG?=	/usr/bin/dialog
 DIRNAME?=	/usr/bin/dirname
@@ -839,6 +917,7 @@ EXPR?=		/bin/expr
 FALSE?=		false				# Shell builtin
 FILE?=		/usr/bin/file
 FIND?=		/usr/bin/find
+FMT?=		/usr/bin/fmt
 GREP?=		/usr/bin/grep
 GUNZIP_CMD?=	/usr/bin/gunzip -f
 GZCAT?=		/usr/bin/gzcat
@@ -851,8 +930,10 @@ LDCONFIG?=	/sbin/ldconfig
 LN?=		/bin/ln
 LS?=		/bin/ls
 MKDIR?=		/bin/mkdir -p
+MKTEMP?=	/usr/bin/mktemp
 MV?=		/bin/mv
 OBJCOPY?=	/usr/bin/objcopy
+OBJDUMP?=	/usr/bin/objdump
 PASTE?=		/usr/bin/paste
 PAX?=		/bin/pax
 PRINTF?=	/usr/bin/printf
@@ -1017,7 +1098,9 @@ X11BASE?=		${DESTDIR}/usr/X11R6
 LINUXBASE?=		${DESTDIR}/compat/linux
 DISTDIR?=		${PORTSDIR}/distfiles
 _DISTDIR?=		${DISTDIR}/${DIST_SUBDIR}
-.if ${OSVERSION} >= 500036
+.if ${OSVERSION} >= 600000
+INDEXFILE?=		INDEX-6
+.elif ${OSVERSION} >= 500036
 INDEXFILE?=		INDEX-5
 .else
 INDEXFILE?=		INDEX
@@ -1227,6 +1310,8 @@ BUILD_WRKSRC?=	${WRKSRC}
 INSTALL_WRKSRC?=${WRKSRC}
 
 PLIST_SUB+=	OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
+SUB_LIST+=	PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}	\
+			DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR}
 
 .if defined(WITHOUT_CPU_CFLAGS)
 .if defined(_CPUCFLAGS)
@@ -1597,14 +1682,6 @@ BROKEN=		"unknown MySQL version: ${MYSQL_VER}"
 .endif # Check for correct libs
 .endif # USE_MYSQL
 
-.if defined(USE_XLIB)
-LIB_DEPENDS+=	X11.6:${X_LIBRARIES_PORT}
-# Add explicit X options to avoid problems with false positives in configure
-.if defined(GNU_CONFIGURE)
-CONFIGURE_ARGS+=--x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include
-.endif
-.endif
-
 # XXX: (not yet): .if defined(USE_AUTOTOOLS)
 .include "${PORTSDIR}/Mk/bsd.autotools.mk"
 # XXX: (not yet): .endif
@@ -1626,6 +1703,14 @@ CONFIGURE_ARGS+=--x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include
 USE_SUBMAKE=	yes
 .endif
 
+.if defined(USE_XLIB)
+LIB_DEPENDS+=	X11.6:${X_LIBRARIES_PORT}
+# Add explicit X options to avoid problems with false positives in configure
+.if defined(GNU_CONFIGURE)
+CONFIGURE_ARGS+=--x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include
+.endif
+.endif
+
 # Set the default for the installation of Postscript(TM)-
 # compatible functionality.
 .if !defined(WITHOUT_X11)
@@ -1903,7 +1988,7 @@ PKGINSTALLVER!= ${PKG_INFO} -P 2>/dev/null | ${SED} -e 's/.*: //'
 DISABLE_CONFLICTS=	YES
 .endif
 .if !defined(PKG_ARGS)
-PKG_ARGS=		-v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | sort -u`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS}
+PKG_ARGS=		-v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS}
 .if !defined(NO_MTREE)
 PKG_ARGS+=		-m ${MTREE_FILE}
 .endif
@@ -2868,20 +2953,20 @@ check-vulnerable:
 	@if [ -f "${AUDITFILE}" ]; then \
 		audit_created=`${_EXTRACT_AUDITFILE} | \
 			${SED} -nEe "1s/^#CREATED: *([0-9]{4})-?([0-9]{2})-?([0-9]{2}).*$$/\1\2\3/p"`; \
-		audit_expiry=`date -u -v-14d "+%Y%m%d"`; \
+		audit_expiry=`${DATE} -u -v-14d "+%Y%m%d"`; \
 		if [ "$$audit_created" -lt "$$audit_expiry" ]; then \
 			${ECHO_MSG} "===>  WARNING: Vulnerability database out of date, checking anyway"; \
 		fi; \
 		vlist=`${_EXTRACT_AUDITFILE} | ${AWK} -F\| ' \
 			/^[^#]/ { \
 				if (!system("${PKG_VERSION} -T \"${PKGNAME}\" \"" $$1 "\"")) \
-					print ">> " $$3 ".\n   Reference: <" $$2 ">" \
+					print "=> " $$3 ".\n   Reference: <" $$2 ">" \
 			} \
 		'`; \
 		if [ -n "$$vlist" ]; then \
 			${ECHO_MSG} "===>  ${PKGNAME} has known vulnerabilities:"; \
 			${ECHO_MSG} "$$vlist"; \
-			${ECHO_MSG} ">> Please update your ports tree and try again."; \
+			${ECHO_MSG} "=> Please update your ports tree and try again."; \
 			exit 1; \
 		fi; \
 	else \
@@ -2913,22 +2998,22 @@ do-fetch:
 			DIR=${DIST_SUBDIR}; \
 			pattern="$${DIR:+$$DIR/}`${ECHO_CMD} $$file | ${SED} -e 's/\./\\\\./g'`"; \
 			if [ -L $$file -o -L $$filebasename ]; then \
-				${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
-				${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
-				${ECHO_MSG} ">> Please correct this problem and try again."; \
+				${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
+				${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
+				${ECHO_MSG} "=> Please correct this problem and try again."; \
 				exit 1; \
 			fi ; \
 			if [ -f ${MD5_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
 				if ! ${GREP} -q "^MD5 ($$pattern)" ${MD5_FILE}; then \
-					${ECHO_MSG} ">> $${DIR:+$$DIR/}$$file is not in ${MD5_FILE}."; \
-					${ECHO_MSG} ">> Either ${MD5_FILE} is out of date, or"; \
-					${ECHO_MSG} ">> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
+					${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${MD5_FILE}."; \
+					${ECHO_MSG} "=> Either ${MD5_FILE} is out of date, or"; \
+					${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
 					exit 1; \
 				fi; \
 			fi; \
-			${ECHO_MSG} ">> $$file doesn't seem to exist in ${_DISTDIR}."; \
+			${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
 			if [ ! -w ${DISTDIR} ]; then \
-			   ${ECHO_MSG} ">> ${DISTDIR} is not writable by you; cannot fetch."; \
+			   ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \
 			   exit 1; \
 			fi; \
 			if [ ! -z "$$select" ] ; then \
@@ -2945,7 +3030,7 @@ do-fetch:
 				SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
 			fi ; \
 			for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
-			    ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
+			    ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
 				DIR=${DIST_SUBDIR}; \
 				CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
 				case $${file} in \
@@ -2957,8 +3042,8 @@ do-fetch:
 					continue 2; \
 				fi \
 			done; \
-			${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
-			${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
+			${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
+			${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
 			exit 1; \
 	    fi \
 	 done)
@@ -2978,12 +3063,12 @@ do-fetch:
 		done; \
 		if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
 			if [ -L $$file -o -L `${BASENAME} $$file` ]; then \
-				${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
-				${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
-				${ECHO_MSG} ">> Please correct this problem and try again."; \
+				${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
+				${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
+				${ECHO_MSG} "=> Please correct this problem and try again."; \
 				exit 1; \
 			fi ; \
-			${ECHO_MSG} ">> $$file doesn't seem to exist in ${_DISTDIR}."; \
+			${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
 			if [ ! -z "$$select" ] ; then \
 				__PATCH_SITES_TMP= ; \
 				for group in $$select; do \
@@ -2998,7 +3083,7 @@ do-fetch:
 				SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
 			fi ; \
 			for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \
-			    ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
+			    ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
 				DIR=${DIST_SUBDIR}; \
 				pattern="$${DIR:+$$DIR/}`${ECHO_CMD} $$file | ${SED} -e 's/\./\\\\./g'`"; \
 				CKSIZE=`${GREP} "^SIZE ($$pattern)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
@@ -3011,8 +3096,8 @@ do-fetch:
 					continue 2; \
 				fi \
 			done; \
-			${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
-			${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
+			${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
+			${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
 			exit 1; \
 	    fi \
 	 done)
@@ -3085,9 +3170,9 @@ do-patch:
 						if ${PATCH} ${PATCH_ARGS} < $$i ; then \
 							PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
 						else \
-							${ECHO_MSG} `${ECHO_CMD} ">> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
+							${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
 							if [ x"$$PATCHES_APPLIED" != x"" ]; then \
-								${ECHO_MSG} `${ECHO_CMD} ">> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
+								${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
 							fi; \
 							${FALSE} ; \
 						fi; \
@@ -3126,7 +3211,7 @@ do-configure:
 	    INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
 	    ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
 			 ${ECHO_CMD} "===>  Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \
-			 (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | /usr/bin/fmt 75 79 ; \
+			 (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
 			 ${FALSE}; \
 		fi)
 .endif
@@ -3225,7 +3310,7 @@ do-package: ${TMPPLIST}
 	@if [ -d ${PACKAGES} ]; then \
 		if [ ! -d ${PKGREPOSITORY} ]; then \
 			if ! ${MKDIR} ${PKGREPOSITORY}; then \
-				${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
+				${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
 				exit 1; \
 			fi; \
 		fi; \
@@ -3261,7 +3346,7 @@ package-links: delete-package-links
 	@for cat in ${CATEGORIES}; do \
 		if [ ! -d ${PACKAGES}/$$cat ]; then \
 			if ! ${MKDIR} ${PACKAGES}/$$cat; then \
-				${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
+				${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
 				exit 1; \
 			fi; \
 		fi; \
@@ -3270,7 +3355,7 @@ package-links: delete-package-links
 .if !defined(NO_LATEST_LINK)
 	@if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
 		if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
-			${ECHO_MSG} ">> Can't create directory ${PKGLATESTREPOSITORY}."; \
+			${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \
 			exit 1; \
 		fi; \
 	fi
@@ -3426,7 +3511,7 @@ security-check:
 	| ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \
 	${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
 	| ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \
-	| ${XARGS} -0 -n 1 /usr/bin/objdump -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \
+	| ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \
 	if \
 		! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \
 		  ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \
@@ -3460,7 +3545,7 @@ security-check:
 	fi; \
 	for i in `${GREP} -v '^@' ${TMPPLIST}`; do \
 		if [ ! -L "${PREFIX}/$$i" -a -f "${PREFIX}/$$i" ]; then \
-			/usr/bin/objdump -R ${PREFIX}/$$i > \
+			${OBJDUMP} -R ${PREFIX}/$$i > \
 				${WRKDIR}/.PLIST.objdump 2> /dev/null; \
 			if [ -s ${WRKDIR}/.PLIST.objdump ] ; then \
 				${EGREP} " $$stupid_functions_regexp" \
@@ -3572,11 +3657,11 @@ _BUILD_SEQ=		build-message pre-build pre-build-script do-build \
 _INSTALL_DEP=	build
 _INSTALL_SEQ=	install-message check-conflicts \
 			    run-depends lib-depends pre-install pre-install-script \
-				generate-plist check-already-installed
+				apply-slist generate-plist check-already-installed
 _INSTALL_SUSEQ= check-umask install-mtree pre-su-install \
 				pre-su-install-script do-install post-install \
 				post-install-script add-plist-info add-plist-docs \
-				compress-man run-ldconfig fake-pkg security-check
+				add-plist-post compress-man run-ldconfig fake-pkg security-check
 _PACKAGE_DEP=	install
 _PACKAGE_SEQ=	package-message pre-package pre-package-script \
 				do-package post-package-script
@@ -3973,10 +4058,10 @@ checksum: fetch
 			CKSUM=`${MD5} < $$file`; \
 			CKSUM2=`${GREP} "^MD5 ($$pattern)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
 			if [ -z "$$CKSUM2" ]; then \
-				${ECHO_MSG} ">> No checksum recorded for $$file."; \
+				${ECHO_MSG} "=> No checksum recorded for $$file."; \
 				OK="false"; \
 			elif [ "$$CKSUM2" = "IGNORE" ]; then \
-				${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in distinfo file even though"; \
+				${ECHO_MSG} "=> Checksum for $$file is set to IGNORE in distinfo file even though"; \
 				${ECHO_MSG} "   the file is not in the "'$$'"{IGNOREFILES} list."; \
 				OK="false"; \
 			else \
@@ -3988,9 +4073,9 @@ checksum: fetch
 					fi; \
 				done; \
 				if $$ckmatch; then \
-					${ECHO_MSG} ">> Checksum OK for $$file."; \
+					${ECHO_MSG} "=> Checksum OK for $$file."; \
 				else \
-					${ECHO_MSG} ">> Checksum mismatch for $$file."; \
+					${ECHO_MSG} "=> Checksum mismatch for $$file."; \
 					refetchlist="$$refetchlist$$file "; \
 					OK="$${OK:-retry}"; \
 				fi; \
@@ -4000,10 +4085,10 @@ checksum: fetch
 			pattern="`${ECHO_CMD} $$file | ${SED} -e 's/\./\\\\./g'`"; \
 			CKSUM2=`${GREP} "($$pattern)" ${MD5_FILE} | ${AWK} '{if(NR<2)print $$4}'`; \
 			if [ "$$CKSUM2" = "" ]; then \
-				${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
+				${ECHO_MSG} "=> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
 				OK="false"; \
 			elif [ "$$CKSUM2" != "IGNORE" ]; then \
-				${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in distinfo file even though"; \
+				${ECHO_MSG} "=> Checksum for $$file is not set to IGNORE in distinfo file even though"; \
 				${ECHO_MSG} "   the file is in the "'$$'"{IGNOREFILES} list."; \
 				OK="false"; \
 			fi; \
@@ -4011,11 +4096,11 @@ checksum: fetch
 		  if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \
 			  ${ECHO_MSG} "===>  Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \
 			  if ( cd ${.CURDIR} && \
-			    ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`expr ${FETCH_REGET} - 1`" fetch); then \
-			  	  if ( cd ${.CURDIR} && \
-			        ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`expr ${FETCH_REGET} - 1`" checksum ); then \
-			  	      OK="true"; \
-			  	  fi; \
+			    ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \
+				  if ( cd ${.CURDIR} && \
+			        ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \
+				      OK="true"; \
+				  fi; \
 			  fi; \
 		  fi ; \
 		  if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \
@@ -4029,7 +4114,7 @@ checksum: fetch
 			  exit 1; \
 		  fi); \
 	elif [ -n "${_CKSUMFILES:M*}" ]; then \
-		${ECHO_MSG} ">> No checksum file (${MD5_FILE})."; \
+		${ECHO_MSG} "=> No checksum file (${MD5_FILE})."; \
 	fi
 .endif
 
@@ -4128,7 +4213,7 @@ ${deptype:L}-depends:
 		if [ $$notfound != 0 ]; then \
 			${ECHO_MSG} "===>    Verifying $$target for $$prog in $$dir"; \
 			if [ ! -d "$$dir" ]; then \
-				${ECHO_MSG} "     >> No directory for $$prog.  Skipping.."; \
+				${ECHO_MSG} "     => No directory for $$prog.  Skipping.."; \
 			else \
 				if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \
 					subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \
@@ -4184,7 +4269,7 @@ lib-depends:
 		if [ $$notfound != 0 ]; then \
 			${ECHO_MSG} "===>    Verifying $$target for $$lib in $$dir"; \
 			if [ ! -d "$$dir" ]; then \
-				${ECHO_MSG} "     >> No directory for $$lib.  Skipping.."; \
+				${ECHO_MSG} "     => No directory for $$lib.  Skipping.."; \
 			else \
 				if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \
 					subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \
@@ -4221,7 +4306,7 @@ misc-depends:
 		${ECHO_MSG} "===>   ${PKGNAME} depends on: $$dir"; \
 		${ECHO_MSG} "===>    Verifying $$target for $$dir"; \
 		if [ ! -d $$dir ]; then \
-			${ECHO_MSG} "     >> No directory for $$dir.  Skipping.."; \
+			${ECHO_MSG} "     => No directory for $$dir.  Skipping.."; \
 		else \
 			(cd $$dir; ${MAKE} $$target $$depends_args) ; \
 		fi \
@@ -4254,7 +4339,7 @@ ALL-DEPENDS-LIST= \
 		else \
 			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
 		fi; \
-	done | sort -u
+	done | ${SORT} -u
 
 .if !target(clean-depends)
 clean-depends:
@@ -4358,13 +4443,13 @@ build-depends-list:
 .endif
 
 BUILD-DEPENDS-LIST= \
-	for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u) $$(${ECHO_CMD} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u); do \
+	for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | ${SORT} -u) $$(${ECHO_CMD} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | ${SORT} -u); do \
 		if [ -d $$dir ]; then \
 			${ECHO_CMD} $$dir; \
 		else \
 			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
 		fi; \
-	done | sort -u
+	done | ${SORT} -u
 
 run-depends-list:
 .if defined(LIB_DEPENDS) || defined(RUN_DEPENDS) || defined(DEPENDS)
@@ -4372,13 +4457,13 @@ run-depends-list:
 .endif
 
 RUN-DEPENDS-LIST= \
-	for dir in $$(${ECHO_CMD} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${SED} -e 'y/ /\n/' | ${CUT} -f 2 -d ':' | sort -u) $$(${ECHO_CMD} ${DEPENDS} | ${SED} -e 'y/ /\n/' | ${CUT} -f 1 -d ':' | sort -u); do \
+	for dir in $$(${ECHO_CMD} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${SED} -e 'y/ /\n/' | ${CUT} -f 2 -d ':' | ${SORT} -u) $$(${ECHO_CMD} ${DEPENDS} | ${SED} -e 'y/ /\n/' | ${CUT} -f 1 -d ':' | ${SORT} -u); do \
 		if [ -d $$dir ]; then \
 			${ECHO_CMD} $$dir; \
 		else \
 			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
 		fi; \
-	done | sort -u
+	done | ${SORT} -u
 
 # Package (recursive runtime) dependency list.  Print out both directory names
 # and package names.
@@ -4447,7 +4532,8 @@ package-recursive: package
 # a large index.  Format is:
 #
 # distribution-name|port-path|installation-prefix|comment| \
-#  description-file|maintainer|categories|build deps|run deps|www site
+#  description-file|maintainer|categories|extract-depends| \
+#  patch-depends|fetch-depends|build-depends|run-depends|www site
 
 .if !target(describe)
 describe:
@@ -4576,6 +4662,25 @@ pretty-print-run-depends-list:
 .endif
 .endif
 
+_SUB_LIST_TEMP=	${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
+.if !target(apply-slist)
+apply-slist:
+.if defined(SUB_FILES)
+.for file in ${SUB_FILES}
+.if !exists(${FILESDIR}/${file}.in)
+	@${ECHO_CMD} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1
+.else
+	@${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file}
+.endif
+.endfor
+.for i in pkg-message pkg-install pkg-deinstall pkg-req
+.if ${SUB_FILES:M${i}*}!=""
+${i:S/-//:U}=	${WRKDIR}/${SUB_FILES:M${i}*}
+.endif
+.endfor
+.endif
+.endif
+
 # Generate packing list.  Also tests to make sure all required package
 # files exist.
 
@@ -4677,8 +4782,20 @@ add-plist-info:
 	@${ECHO_CMD} "@exec install-info %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
 		>> ${TMPPLIST}
 .endfor
-.if !defined(NO_MTREE)
+.if (${PREFIX} != "/usr")
 	@${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST}
+.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE})
+	@${ECHO_CMD} "@unexec rmdir %D/info 2> /dev/null || true" >> ${TMPPLIST}
+.endif
+.endif
+
+# If we're installing into a non-standard PREFIX, we need to remove that directory at
+# deinstall-time
+add-plist-post:
+.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr")
+	@${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST}
+.else
+	@${DO_NADA}
 .endif
 
 # Compress (or uncompress) and symlink manpages.
@@ -4743,7 +4860,7 @@ fake-pkg:
 		if [ -f ${PKGMESSAGE} ]; then \
 			${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
 		fi; \
-		for dep in `${PKG_INFO} -qf ${PKGNAME} | ${GREP} -w ^@pkgdep | ${AWK} '{print $$2}' | sort -u`; do \
+		for dep in `${PKG_INFO} -qf ${PKGNAME} | ${GREP} -w ^@pkgdep | ${AWK} '{print $$2}' | ${SORT} -u`; do \
 			if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
 				if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
 					>/dev/null 2>&1; then \