aboutsummaryrefslogtreecommitdiff
path: root/misc/py-spdx-tools
Commit message (Collapse)AuthorAgeFilesLines
* misc/py-spdx-tools: Update to 0.8.3Jason E. Hale2025-02-023-13/+34
| | | | | | | | | | | | | | | * Add a workaround by pre-generating some files to avoid fs-violations in poudriere. * Remove CONFLICTS_INSTALL as the installed package of this port no longer conflicts with misc/py-spdx. Changelog since 0.7.1: https://github.com/spdx/tools-python/blob/v0.8.3/CHANGELOG.md PR: 284464 Reported by: jhale
* devel/py-pyyaml: Move devel/py-yaml to devel/py-pyyamlPo-Chuan Hsieh2024-07-071-1/+2
| | | | - Bump PORTREVISION of dependent ports for dependency change
* devel/py-setuptools-scm: update to 8.0.4Charlie Li2024-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Directory and PORTNAME changed to match normalised name in release tarball; consumers updated to match. Although setuptools itself is specified as a run dependency in the Python package metadata, it is currently left out here to prevent environment pollution until at least PR 270510 is committed. Additionally, this version of setuptools-scm requires setuptools>=61, which means this version is only meant for USE_PYTHON=pep517 ports as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58 also after PR 270510. science/py-emmet-core is switched to devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8. devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to RUN_DEPENDS to compensate. Further details: https://wiki.freebsd.org/Python/setuptools Reported by: yuri Co-authored by: matthew Exp-run by: antoine (earlier iteration) Approved by: yuri (science/py-emmet-core, previous iteration) PR: 272134 Differential Revision: https://reviews.freebsd.org/D39288
* devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}Charlie Li2023-07-181-1/+1
| | | | | | | | Currently a no-op, but in the future outputs the correct setuptools port depending on whether USES_PYTHON=distutils is specified. With hat: python PR: 270510, 270358
* all: remove explicit versions in USES=python for "3.x+"Rene Ladan2023-06-271-1/+1
| | | | | | | | | | | | | | | | | | | The logic in USES=python will automatically convert this to 3.8+ by itself. Adjust two ports that only had Python 3.7 mentioned but build fine on Python 3.8 too. finance/quickfix: mark BROKEN with PYTHON libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found ^~~~~~~~~~ 1 warning and 1 error generated. Reviewed by: portmgr, vishwin, yuri Differential Revision: <https://reviews.freebsd.org/D40568>
* misc/py-spdx-tools: update to 0.7.1Matthew Seaman2023-05-112-14/+19
| | | | | | | | Switch to USE_PYTHON=pep517, pytest Changes: https://github.com/spdx/tools-python/blob/v0.7.1/CHANGELOG.md PR: 271343
* */*: rename CHEESESHOP to PYPI in MASTER_SITESDmitry Marakasov2023-01-111-1/+1
| | | | | | PR: 267994 Differential revision: D37518 Approved by: bapt
* Remove WWW entries moved into port MakefilesStefan Eßer2022-09-071-2/+0
| | | | | | | | | | Commit b7f05445c00f has added WWW entries to port Makefiles based on WWW: lines in pkg-descr files. This commit removes the WWW: lines of moved-over URLs from these pkg-descr files. Approved by: portmgr (tcberner)
* Add WWW entries to port MakefilesStefan Eßer2022-09-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been common practice to have one or more URLs at the end of the ports' pkg-descr files, one per line and prefixed with "WWW:". These URLs should point at a project website or other relevant resources. Access to these URLs required processing of the pkg-descr files, and they have often become stale over time. If more than one such URL was present in a pkg-descr file, only the first one was tarnsfered into the port INDEX, but for many ports only the last line did contain the port specific URL to further information. There have been several proposals to make a project URL available as a macro in the ports' Makefiles, over time. This commit implements such a proposal and moves one of the WWW: entries of each pkg-descr file into the respective port's Makefile. A heuristic attempts to identify the most relevant URL in case there is more than one WWW: entry in some pkg-descr file. URLs that are not moved into the Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr files in order to preserve them. There are 1256 ports that had no WWW: entries in pkg-descr files. These ports will not be touched in this commit. The portlint port has been adjusted to expect a WWW entry in each port Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as deprecated. Approved by: portmgr (tcberner)
* */*: Remove redundant '-*' from CONFLICTS definitionsStefan Eßer2021-11-251-1/+1
| | | | | | | | | The conflict checks compare the patterns first against the package names without version (as reported by "pkg query "%n"), then - if there was no match - agsinst the full package names including the version (as reported by "pkg query "%n-%v"). Approved by: portmgr (blanket)
* One more small cleanup, forgotten yesterday.Mathieu Arnold2021-04-071-1/+0
| | | | Reported by: lwhsu
* Remove # $FreeBSD$ from Makefiles.Mathieu Arnold2021-04-061-1/+0
|
* Drop python 2.7 support from a few portsAntoine Brodin2020-12-281-1/+1
| | | | | | | With hat: portmgr Notes: svn path=/head/; revision=559531
* misc/py-spdx-tools: Update to 0.6.1Kai Knoblich2019-09-032-9/+11
| | | | | | | | | | | | | | | | | | * Enable build for all Python versions because Python 3 is supported since the 0.5.x release. This became more evident via tests by using pytest. * Make the port concurrent safe as it installs a script and some (optional) example files. * Also refine the "do-test" target by using devel/py-pytest which gives a better overview of the test results. Changelog since 0.5.4: https://github.com/spdx/tools-python/compare/v0.5.4...eac4e90 Notes: svn path=/head/; revision=511042
* Change my maintainer email address to my new one at the FreeBSD project.Kai Knoblich2019-02-011-1/+1
| | | | | | | | | Reviewed by: miwi (mentor) Approved by: miwi (mentor) Differential Revision: https://reviews.freebsd.org/D19050 Notes: svn path=/head/; revision=491837
* Implements an SPDX tag/value and RDF parser, validator and handler in Python.Martin Wilke2018-07-283-0/+48
Features: - API to create and manipulate SPDX documents. - Parse and create Tag/Value format SPDX files - Parse and create RDF format SPDX files WWW: https://github.com/spdx/tools-python PR: 229438 Submitted by: freebsd_ports@k-worx.org Sponsored by: iXsystems Inc. Notes: svn path=/head/; revision=475528
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-17 09:00:11 +0000