amr: remove

Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.

Sponsored by:		Netflix
Relnotes:		yes
Reviewed by:		scottl
Differential Revision:	https://reviews.freebsd.org/D33113

1 files changed, 0 insertions, 246 deletions

diff --git a/share/man/man4/amr.4 b/share/man/man4/amr.4
deleted file mode 100644
index 8ef14dfd1d9b..000000000000
--- a/share/man/man4/amr.4
+++ /dev/null
@@ -1,246 +0,0 @@
-.\"
-.\" Copyright (c) 2000 Jeroen Ruigrok van der Werven
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. The name of the author may not be used to endorse or promote products
-.\"    derived from this software without specific prior written permission
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.Dd March 29, 2006
-.Dt AMR 4
-.Os
-.Sh NAME
-.Nm amr
-.Nd MegaRAID SCSI/ATA/SATA RAID driver
-.Sh SYNOPSIS
-To compile this driver into the kernel,
-place the following lines in your
-kernel configuration file:
-.Bd -ragged -offset indent
-.Cd "device pci"
-.Cd "device scbus"
-.Cd "device amr"
-.Ed
-.Pp
-Alternatively, to load the driver as a
-module at boot time, place the following line in
-.Xr loader.conf 5 :
-.Bd -literal -offset indent
-amr_load="YES"
-.Ed
-.Sh DEPRECATION NOTICE
-The
-.Nm
-driver is not present in
-.Fx 13.0 .
-.Sh DESCRIPTION
-The
-.Nm
-driver provides support for LSI Logic MegaRAID SCSI, ATA and SATA
-RAID controllers and legacy American Megatrends MegaRAID
-SCSI RAID controllers, including models relabeled
-and sold by Dell and Hewlett-Packard.
-.Pp
-LSI MegaRAID SAS controllers are supported by
-.Xr mfi 4
-and will not work with this driver.
-.Sh HARDWARE
-Controllers supported by the
-.Nm
-driver include:
-.Pp
-.Bl -bullet -compact
-.It
-MegaRAID SATA 150-4
-.It
-MegaRAID SATA 150-6
-.It
-MegaRAID SATA 300-4X
-.It
-MegaRAID SATA 300-8X
-.It
-MegaRAID SCSI 320-1E
-.It
-MegaRAID SCSI 320-2E
-.It
-MegaRAID SCSI 320-4E
-.It
-MegaRAID SCSI 320-0X
-.It
-MegaRAID SCSI 320-2X
-.It
-MegaRAID SCSI 320-4X
-.It
-MegaRAID SCSI 320-0
-.It
-MegaRAID SCSI 320-1
-.It
-MegaRAID SCSI 320-2
-.It
-MegaRAID SCSI 320-4
-.It
-MegaRAID Series 418
-.It
-MegaRAID i4 133 RAID
-.It
-MegaRAID Elite 1500 (Series 467)
-.It
-MegaRAID Elite 1600 (Series 493)
-.It
-MegaRAID Elite 1650 (Series 4xx)
-.It
-MegaRAID Enterprise 1200 (Series 428)
-.It
-MegaRAID Enterprise 1300 (Series 434)
-.It
-MegaRAID Enterprise 1400 (Series 438)
-.It
-MegaRAID Enterprise 1500 (Series 467)
-.It
-MegaRAID Enterprise 1600 (Series 471)
-.It
-MegaRAID Express 100 (Series 466WS)
-.It
-MegaRAID Express 200 (Series 466)
-.It
-MegaRAID Express 300 (Series 490)
-.It
-MegaRAID Express 500 (Series 475)
-.It
-Dell PERC
-.It
-Dell PERC 2/SC
-.It
-Dell PERC 2/DC
-.It
-Dell PERC 3/DCL
-.It
-Dell PERC 3/QC
-.It
-Dell PERC 4/DC
-.It
-Dell PERC 4/IM
-.It
-Dell PERC 4/SC
-.It
-Dell PERC 4/Di
-.It
-Dell PERC 4e/DC
-.It
-Dell PERC 4e/Di
-.It
-Dell PERC 4e/Si
-.It
-Dell PERC 4ei
-.It
-HP NetRAID-1/Si
-.It
-HP NetRAID-3/Si (D4943A)
-.It
-HP Embedded NetRAID
-.It
-Intel RAID Controller SRCS16
-.It
-Intel RAID Controller SRCU42X
-.El
-.Sh DIAGNOSTICS
-.Ss Driver initialisation/shutdown phase
-.Bl -diag
-.It amr%d: memory window not available
-.It amr%d: I/O window not available
-.Pp
-The PCI BIOS did not allocate resources necessary for the correct operation of
-the controller.
-The driver cannot attach to this controller.
-.It amr%d: busmaster bit not set, enabling
-.Pp
-The PCI BIOS did not enable busmaster DMA,
-which is required for the correct operation of the controller.
-The driver has enabled this bit and initialisation will proceed.
-.It amr%d: can't allocate register window
-.It amr%d: can't allocate interrupt
-.It amr%d: can't set up interrupt
-.It amr%d: can't allocate parent DMA tag
-.It amr%d: can't allocate buffer DMA tag
-.It amr%d: can't allocate scatter/gather DMA tag
-.It amr%d: can't allocate s/g table
-.It amr%d: can't allocate mailbox tag
-.It amr%d: can't allocate mailbox memory
-.Pp
-A resource allocation error occurred while initialising the driver;
-initialisation has failed and the driver will not attach to this controller.
-.It amr%d: can't obtain configuration data from controller
-.It amr%d: can't obtain product data from controller
-.Pp
-The driver was unable to obtain vital configuration data from the controller.
-Initialisation has failed and the driver will not attach to this controller.
-.It amr%d: can't establish configuration hook
-.It amr%d: can't scan controller for drives
-.Pp
-The scan for logical drives managed by the controller failed.
-No drives will be attached.
-.It amr%d: device_add_child failed
-.It amr%d: bus_generic_attach returned %d
-.Pp
-Creation of the logical drive instances failed;
-attachment of one or more logical drives may have been aborted.
-.It amr%d: flushing cache...
-.Pp
-The controller cache is being flushed prior to shutdown or detach.
-.El
-.Ss Operational diagnostics
-.Bl -diag
-.It amr%d: I/O beyond end of unit (%u,%d > %u)
-.Pp
-A partitioning error or disk corruption has caused an I/O request
-beyond the end of the logical drive.
-This may also occur if FlexRAID Virtual Sizing is enabled and
-an I/O operation is attempted on a portion of the virtual drive
-beyond the actual capacity available.
-.It amr%d: polled command timeout
-.Pp
-An initialisation command timed out.
-The initialisation process may fail as a result.
-.It amr%d: bad slot %d completed
-.Pp
-The controller reported completion of a command that the driver did not issue.
-This may result in data corruption,
-and suggests a hardware or firmware problem with the system or controller.
-.It amr%d: I/O error - %x
-.Pp
-An I/O error has occurred.
-.El
-.Sh SEE ALSO
-.Xr cd 4 ,
-.Xr da 4 ,
-.Xr mfi 4 ,
-.Xr sa 4 ,
-.Xr scsi 4
-.Sh AUTHORS
-.An -nosplit
-The
-.Nm
-driver was written by
-.An Mike Smith Aq Mt msmith@FreeBSD.org .
-.Pp
-This manual page was written by
-.An Mike Smith Aq Mt msmith@FreeBSD.org
-and
-.An Jeroen Ruigrok van der Werven Aq Mt asmodai@FreeBSD.org .